Today's Message Index:
----------------------
1. 07:03 AM - Re: Silicone heatsink compound (Roger Lee)
2. 03:26 PM - First flight of my Kolb (AtomicDog)
3. 05:22 PM - Re: Kolb-List Digest: 8 Msgs - 07/14/12 (George Bearden)
4. 05:36 PM - Hanger Sale (Charles Davis)
5. 06:01 PM - Re: Hanger Sale (David d.)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Silicone heatsink compound |
Hi Rick,
The silicone thermal conducting paste has been used by Rotax for more years than
I can remember. It is in the Line Maint. Manual and in service bulletins. Rotax
also says not to use anti seize. Anti seize has no other redeeming quality
other than what it was originally designed for and that was to keep things from
galling or freezing up. It's old school because it was used back when they
didn't have the thermal paste and didn't know anything else. Times have changed
and there is something better. Use the silicone thermal transfer paste it's
better and for the health of your engine.
--------
Roger Lee
Tucson, Az.
Light Sport Repairman - Maintenance Rated
Rotax Repair Center - Heavy Maint. Rated
Home 520-574-1080 TRY HOME FIRST
Cell 520-349-7056
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=378499#378499
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | First flight of my Kolb |
At last, my Kolb Firestar took flight Sat. after 2 1/2 years of the joy of building,
blood sweat & tears. After a few crow hops and a flight around the pattern
on Saturday, I went for an hour flight on Sunday. My baby is a Firesatr II,
Rotax 582, B gearbox, Ivo 3 blade 66". It flies great, cruise speed is 80mph
at 5500 rpm, stall occurs at 40mph.
Many thanks to all the folks on this list, as I researched many of my questions
here. Also much thanks to Travis at kolb.
--------
Building Firestar II
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=378553#378553
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RE: Kolb-List Digest: 8 Msgs - 07/14/12 |
> so I would like to send a tube to the first 9 emails that I get
If I'm not too late I'd like some for my 503 on my Kolb Firestar I.
Thanks!
GeoB
PS: Addy coming on email
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Now that the Firefly's sold, I am going through the hanger, looking at
anything which might be valuable to some one (other then the data
plate and Airworthiness Certificate!)
I have a 2.25" VSI, and a full helmet, which I will offer to the List
prior to posting on Ebay or Barnstormers.
VSI: Range: 0 - 2000'. Aircraft Spruce has a similar one (10-05500)
for $265, while Wicks has them for $254. Note this is an un-certified
instrument with no data plate or markings, but it does work.
http://www.aircraftspruce.com/catalog/inpages/umavertspeed.php
http://www.wicksaircraft.com/catalog/product_detail.php/pid=15322~subid=11458/index.html
First Lister to respond has it for $150, including shipping anywhere
in the lower 48.
Also, any interest in the helmet?
Regards,
Chuck
Malvern, PA
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
A full helmet? What's in it?
But seriously what is a full helmet?
--------
Kolb Mark IIIX 582 Blue head
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=378565#378565
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|