Today's Message Index:
----------------------
1. 07:57 AM - DC PJ-068 PJ-055 Headset to IC-A5 adaptor (Phil)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | DC PJ-068 PJ-055 Headset to IC-A5 adaptor |
Here is the article I went by to create my own patch cable between my David
Clark H10-30 dual plugs headset (PJ-068 mic plug and PH-055 earphone plug)
. I did not wire in a PTT but I might in the future. A PTT on the stick is
enticing.
-
http://www.bowersflybaby.com/tech/velcro.html
-
Phil H.
Kolb Firefly 11-4-76
--- On Thu, 8/23/12, Phil <phactor9@yahoo.com> wrote:
From: Phil phactor9@yahoo.com
Here is my home-brew David Clark H10-30 to Icom IC-A5 adaptor. The top sche
matic is the DC headset. The bottom is the pin-outs of the 4-conductor 3.5m
m plug that goes in the top of the radio. Try to find a 3.5mm plug with shi
elded wiring.
http://phactor.com/ICA5_to_DC-H10-30.jpg
-
You need to buy female receptacles for the PJ-055 and PJ-068 males coming f
rom the headset. Break apart the wires from the 3.5mm plug and solder them
accordingly. Tested just fine. If you want the PTT, just order another push
button switch and wire it in, too.
-
Across the top, I've drawn the color coding for the female receptacles. Stu
dy it long enough and it's all there. .206 is the mic plug and .250 is the
earphones.
--- On Tue, 8/21/12, a57 <a57@yahoo.com> wrote:
I bought an Icom IC a5 off eBay. I have a helmet that has a Rad headset 3 c
ontact .250 single plug. I bought a PTT switch off eBay. The icom a5 has a
3.5mm 4 contact single plug. Question: how do I get them all together witho
ut spending $120.00 For a patch cable? Thanks, Robert
.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|