---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 05/30/13: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:57 PM - Prop clearance (Andy and Sheila Slinkard) 2. 07:03 PM - Re: Prop clearance (John Hauck) 3. 08:44 PM - Emailing: 004 (Andy and Sheila Slinkard) 4. 08:51 PM - Re: Emailing: 004 (Larry Cottrell) 5. 09:22 PM - Re: Emailing: 004 (Andy and Sheila Slinkard) 6. 09:31 PM - Re: Emailing: 004 (Larry Cottrell) 7. 09:35 PM - Re: Emailing: 004 (Andy and Sheila Slinkard) 8. 09:35 PM - Re: Emailing: 004 (Andy and Sheila Slinkard) ________________________________ Message 1 _____________________________________ Time: 06:57:09 PM PST US From: "Andy and Sheila Slinkard" Subject: Kolb-List: Prop clearance Kolbers, Would be interested in hearing what prop to fuselage tube clearance you are running? Particularly those with HKS or Rotax engines. Thanks, Andy ________________________________ Message 2 _____________________________________ Time: 07:03:14 PM PST US From: "John Hauck" Subject: RE: Kolb-List: Prop clearance Would be interested in hearing what prop to fuselage tube clearance you are running? Particularly those with HKS or Rotax engines. Thanks, Andy Working from memory, which is dangerous, I have run 1.5" (recommended by Kolb) down to .75", with engines from 582 to 912ULS. john h mkIII Titus, Alabama ________________________________ Message 3 _____________________________________ Time: 08:44:05 PM PST US From: "Andy and Sheila Slinkard" Subject: Kolb-List: Emailing: 004 Attention John and Larry, Thanks John for the reply, my clearance is perfect. Larry, what is the latest on the Rock House gathering? Andy Your message is ready to be sent with the following file or link attachments: 004 ________________________________ Message 4 _____________________________________ Time: 08:51:40 PM PST US Subject: Re: Kolb-List: Emailing: 004 From: Larry Cottrell June 29 through July 6th or when we get tired of each other. I was interested in the type of prop, and was wondering if the one pictured might be a bit heavy for the gear box? Just asking. Larry On Thu, May 30, 2013 at 9:43 PM, Andy and Sheila Slinkard < andysheila@eltopia.com> wrote: > ** > Attention John and Larry, > > Thanks John for the reply, my clearance is perfect. > > Larry, what is the latest on the Rock House gathering? > > Andy > > > Your message is ready to be sent with the following file or link > attachments: > 004 > > -- *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 5 _____________________________________ Time: 09:22:15 PM PST US From: "Andy and Sheila Slinkard" Subject: Re: Kolb-List: Emailing: 004 Larry, according to Powerfin the low moment-of-inertia mass is perfect for this engine, gear box B, prop length. (below three thousand KG/CM2). Andy ----- Original Message ----- From: Larry Cottrell To: kolb-list@matronics.com Sent: Thursday, May 30, 2013 8:51 PM Subject: Re: Kolb-List: Emailing: 004 June 29 through July 6th or when we get tired of each other. I was interested in the type of prop, and was wondering if the one pictured might be a bit heavy for the gear box? Just asking. Larry On Thu, May 30, 2013 at 9:43 PM, Andy and Sheila Slinkard wrote: Attention John and Larry, Thanks John for the reply, my clearance is perfect. Larry, what is the latest on the Rock House gathering? Andy Your message is ready to be sent with the following file or link attachments: 004 Note: To protect against computer viruses, e-mail programs may -- If you forward this email, or any part of it, please remove my email address before sending. ________________________________ Message 6 _____________________________________ Time: 09:31:47 PM PST US Subject: Re: Kolb-List: Emailing: 004 From: Larry Cottrell Good, I will be interested in seeing how it performs, preferably side by side comparison. How about it, you going to be ready by the end of June? Larry On Thu, May 30, 2013 at 10:20 PM, Andy and Sheila Slinkard < andysheila@eltopia.com> wrote: > ** > Larry, according to Powerfin the low moment-of-inertia mass is perfect for > this engine, gear box B, prop length. (below three thousand KG/CM2). > Andy > > ----- Original Message ----- > *From:* Larry Cottrell > *To:* kolb-list@matronics.com > *Sent:* Thursday, May 30, 2013 8:51 PM > *Subject:* Re: Kolb-List: Emailing: 004 > > June 29 through July 6th or when we get tired of each other. > > I was interested in the type of prop, and was wondering if the one > pictured might be a bit heavy for the gear box? Just asking. > Larry > > On Thu, May 30, 2013 at 9:43 PM, Andy and Sheila Slinkard < > andysheila@eltopia.com> wrote: > >> ** >> Attention John and Larry, >> >> Thanks John for the reply, my clearance is perfect. >> >> Larry, what is the latest on the Rock House gathering? >> >> Andy >> >> >> >> >> >> >> Your message is ready to be sent with the following file or link >> attachments: >> 004 >> >> > > > -- > *If you forward this email, or any part of it, please remove my email > address before sending.* > > * > > href="http://www.matronics.com/Navigator?Kolb-List">http://www.matronics.com/Navigator?Kolb-List > href="http://forums.matronics.com">http://forums.matronics.com > href="http://www.matronics.com/contribution">http://www.matronics.com/c* > > * > > * > > -- *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 7 _____________________________________ Time: 09:35:20 PM PST US From: "Andy and Sheila Slinkard" Subject: Re: Kolb-List: Emailing: 004 ----- Original Message ----- From: Larry Cottrell To: kolb-list@matronics.com Sent: Thursday, May 30, 2013 9:31 PM Subject: Re: Kolb-List: Emailing: 004 Good, I will be interested in seeing how it performs, preferably side by side comparison. How about it, you going to be ready by the end of June? Larry On Thu, May 30, 2013 at 10:20 PM, Andy and Sheila Slinkard wrote: Larry, according to Powerfin the low moment-of-inertia mass is perfect for this engine, gear box B, prop length. (below three thousand KG/CM2). Andy ----- Original Message ----- From: Larry Cottrell To: kolb-list@matronics.com Sent: Thursday, May 30, 2013 8:51 PM Subject: Re: Kolb-List: Emailing: 004 June 29 through July 6th or when we get tired of each other. I was interested in the type of prop, and was wondering if the one pictured might be a bit heavy for the gear box? Just asking. Larry On Thu, May 30, 2013 at 9:43 PM, Andy and Sheila Slinkard wrote: Attention John and Larry, Thanks John for the reply, my clearance is perfect. Larry, what is the latest on the Rock House gathering? Andy Your message is ready to be sent with the following file or link attachments: 004 Note: To protect against computer viruses, e-mail programs may -- If you forward this email, or any part of it, please remove my email address before sending. href="http://www.matronics.com/Navigator?Kolb-List">http://www.matronic s.com/Navigator?Kolb-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- If you forward this email, or any part of it, please remove my email address before sending. ________________________________ Message 8 _____________________________________ Time: 09:35:35 PM PST US From: "Andy and Sheila Slinkard" Subject: Re: Kolb-List: Emailing: 004 ----- Original Message ----- From: Larry Cottrell To: kolb-list@matronics.com Sent: Thursday, May 30, 2013 9:31 PM Subject: Re: Kolb-List: Emailing: 004 Good, I will be interested in seeing how it performs, preferably side by side comparison. How about it, you going to be ready by the end of June? Larry On Thu, May 30, 2013 at 10:20 PM, Andy and Sheila Slinkard wrote: Larry, according to Powerfin the low moment-of-inertia mass is perfect for this engine, gear box B, prop length. (below three thousand KG/CM2). Andy ----- Original Message ----- From: Larry Cottrell To: kolb-list@matronics.com Sent: Thursday, May 30, 2013 8:51 PM Subject: Re: Kolb-List: Emailing: 004 June 29 through July 6th or when we get tired of each other. I was interested in the type of prop, and was wondering if the one pictured might be a bit heavy for the gear box? Just asking. Larry On Thu, May 30, 2013 at 9:43 PM, Andy and Sheila Slinkard wrote: Attention John and Larry, Thanks John for the reply, my clearance is perfect. Larry, what is the latest on the Rock House gathering? Andy Your message is ready to be sent with the following file or link attachments: 004 Note: To protect against computer viruses, e-mail programs may -- If you forward this email, or any part of it, please remove my email address before sending. href="http://www.matronics.com/Navigator?Kolb-List">http://www.matronic s.com/Navigator?Kolb-List href="http://forums.matronics.com">http://forums.matronics.com href="http://www.matronics.com/contribution">http://www.matronics.com/c get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- If you forward this email, or any part of it, please remove my email address before sending. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.