---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sat 06/15/13: 19 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:18 AM - Re: Microburst topples Kolb Trailer - Injures my Firestar -2 (Ralph B) 2. 08:39 AM - Re: Latex Pain Forum (Richard Girard) 3. 09:15 AM - Re: Microburst topples Kolb Trailer - Injures my Firestar -2 (miyer2u) 4. 09:36 AM - Jig To Install Hinges (Dnul) 5. 09:43 AM - Jip To Cut Bushings (Dnul) 6. 09:51 AM - Sport Instructor Central Ohio (Dnul) 7. 10:33 AM - Re: Jig To Install Hinges (william sullivan) 8. 01:24 PM - IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (miyer2u) 9. 02:02 PM - Re: Latex Pain Forum (Beauford) 10. 02:04 PM - Re: Latex Pain Forum (gliderx5@comcast.net) 11. 02:28 PM - Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (John Hauck) 12. 05:03 PM - Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (miyer2u) 13. 06:42 PM - Re: Latex Pain Forum (Michael Orth) 14. 06:46 PM - Re: Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (John Hauck) 15. 07:32 PM - Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (Jack B. Hart) 16. 08:30 PM - Re: Sport aviation mag..... (Dnul) 17. 08:34 PM - Re: Sport aviation mag..... (Dnul) 18. 09:19 PM - Re: Sport aviation mag..... (Dnul) 19. 09:41 PM - Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice (miyer2u) ________________________________ Message 1 _____________________________________ Time: 07:18:39 AM PST US Subject: Kolb-List: Re: Microburst topples Kolb Trailer - Injures my Firestar -2 From: "Ralph B" Mahesh, Sorry to hear about your loss. It's nothing but heartache, but if you can find it in yourself to rebuild your Firestar, you will be a happier man. One attitude worth taking is to tell yourself that you can rebuild it better than it was before and maybe add a few things that you thought about when building it the first time. Once it's flying again, this tragedy will be a fading memory. Ralph B -------- Ralph B Original Firestar 447 N91493 E-AB 1000+ hours 26 years flying it Kolbra 912ULS N20386 200 hours Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402733#402733 ________________________________ Message 2 _____________________________________ Time: 08:39:15 AM PST US Subject: Re: Kolb-List: Latex Pain Forum From: Richard Girard Surely the title of your post is a Freudian slip, is it not? Rick Girard do not archive On Fri, Jun 14, 2013 at 4:31 PM, wrote: > I just got word that I will be presenting a forum at Airventure on > painting your homebuilt with latex paint, Wednesday, at 11:30. I plan to > camp with my Titan Tornado in the ultralight area. If any of you are > attending Airventure please stop by the forum or the camp site and say hi. > I hope to be there from Sunday through Friday, weather permitting. > > > See you there > > Malcolm > > http://home.comcast.net/~mmorrison123/Airplanes.htm > > http://home.comcast.net/~mmorrison123/Latex.htm > > > * > > * > > -- Zulu Delta Mk IIIC Thanks, Homer GBYM It isn't necessary to have relatives in Kansas City in order to be unhappy. - Groucho Marx ________________________________ Message 3 _____________________________________ Time: 09:15:56 AM PST US Subject: Kolb-List: Re: Microburst topples Kolb Trailer - Injures my Firestar -2 From: "miyer2u" Thanks Ralph. I agree! I am planning to bring about a few modification to my Trailer. I plant to weld eyebolts on to the bottom and top so that I can strap it down just like a tiedown....Earthquake would be the only concern then :-)) Mahesh Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402736#402736 ________________________________ Message 4 _____________________________________ Time: 09:36:25 AM PST US Subject: Kolb-List: Jig To Install Hinges From: "Dnul" The picture shows a jig which immobilizes the hinge in position for drilling. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402738#402738 Attachments: http://forums.matronics.com//files/firefly_may13_028_536.jpg ________________________________ Message 5 _____________________________________ Time: 09:43:27 AM PST US Subject: Kolb-List: Jip To Cut Bushings From: "Dnul" Bushing can be cut square to an exact length. Use bee's wax on hacksaw. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402739#402739 Attachments: http://forums.matronics.com//files/009_348.jpg ________________________________ Message 6 _____________________________________ Time: 09:51:05 AM PST US Subject: Kolb-List: Sport Instructor Central Ohio From: "Dnul" http://www.heavenboundaviation.com/ Aircraft Dealer, Engine Dealer/Rebuilder, Airfield, Electronics. Cell: 740-644-4690 Address: 8878 Harmony Church Rd., Johnstown, OH 43031 -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402741#402741 ________________________________ Message 7 _____________________________________ Time: 10:33:03 AM PST US From: william sullivan Subject: Re: Kolb-List: Jig To Install Hinges - Doug- What kind of bushings?- Keep posting!!!- do not archive ------------------------- ----------- Bill Sullivan ------------------------- ----------- Windsor Locks, Ct. ------------------------- ----------- FS 447 --- On Sat, 6/15/13, Dnul wrote: From: Dnul Subject: Kolb-List: Jig To Install Hinges The picture shows a jig which immobilizes the hinge in position for drillin g. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402738#402738 Attachments: http://forums.matronics.com//files/firefly_may13_028_536.jpg le, List Admin. ________________________________ Message 8 _____________________________________ Time: 01:24:00 PM PST US Subject: Kolb-List: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice From: "miyer2u" Kolbers, I have to replace two of my current 3 blade 72" IVO Props because of the microburst impact for my Rotax 503. Should I switch to a 3 blade warp drive or just stick to IVO. On the forum I have heard good things on the warp drive prop and since they cost almost the same, I wanted some input from you all and then proceed ahead! Thanks in advance! Mahesh Iyer FS-2, Rotax -503 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402755#402755 ________________________________ Message 9 _____________________________________ Time: 02:02:13 PM PST US From: "Beauford " Subject: RE: Kolb-List: Latex Pain Forum ..a thing of beauty, Brother Girard.. my congratulations. beauford do not archive From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list-server@matronics.com] On Behalf Of Richard Girard Subject: Re: Kolb-List: Latex Pain Forum Surely the title of your post is a Freudian slip, is it not? Rick Girard ________________________________ Message 10 ____________________________________ Time: 02:04:08 PM PST US From: gliderx5@comcast.net Subject: Re: Kolb-List: Latex Pain Forum I would like to buy a "T" Malcolm ----- Original Message ----- From: "Richard Girard" Sent: Saturday, June 15, 2013 11:38:49 AM Subject: Re: Kolb-List: Latex Pain Forum Surely the title of your post is a Freudian slip, is it not? Rick Girard do not archive On Fri, Jun 14, 2013 at 4:31 PM, < gliderx5@comcast.net > wrote: I just got word that I will be presenting a forum at Airventure on painting your homebuilt with latex paint, Wednesday, at 11:30. I plan to camp with my Titan Tornado in the ultralight area. If any of you are attending Airventure please stop by the forum or the camp site and say hi. I hope to be there from Sunday through Friday, weather permitting. See you there Malcolm http://home.comcast.net/~mmorrison123/Airplanes.htm http://home.comcast.net/~mmorrison123/Latex.htm get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- Zulu Delta Mk IIIC Thanks, Homer GBYM It isn't necessary to have relatives in Kansas City in order to be unhappy. - Groucho Marx ________________________________ Message 11 ____________________________________ Time: 02:28:27 PM PST US From: "John Hauck" Subject: RE: Kolb-List: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice Should I switch to a 3 blade warp drive or just stick to IVO. On the forum I have heard good things on the warp drive prop and since they cost almost the same, I wanted some input from you all and then proceed ahead! Thanks in advance! Mahesh Iyer FS-2, Rotax -503 Mahesh/Kolbers: If I was in your shoes, I'd go with a two blade Warp Drive. Been flying with Warp Drive since 1993. That equates to well over 3,000 hours on my old MKIII without a prop problem. john h mkIII Somewhere between KC, MO, and Lincoln, NE. ________________________________ Message 12 ____________________________________ Time: 05:03:52 PM PST US Subject: Kolb-List: Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice From: "miyer2u" Thanks John. What was the length of your prop? Will it give me the same thrust as a three blade IVO. Are there any advantages, disadvantages of a two blade vs a three blade? Appreciate your input! Mahesh Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402763#402763 ________________________________ Message 13 ____________________________________ Time: 06:42:52 PM PST US From: "Michael Orth" Subject: Re: Kolb-List: Latex Pain Forum Do you apply the latex pain with a roller? Michael From: gliderx5@comcast.net Sent: Saturday, June 15, 2013 2:03 PM Subject: Re: Kolb-List: Latex Pain Forum I would like to buy a "T" Malcolm ------------------------------------------------------------------------- ------- From: "Richard Girard" Sent: Saturday, June 15, 2013 11:38:49 AM Subject: Re: Kolb-List: Latex Pain Forum Surely the title of your post is a Freudian slip, is it not? Rick Girard do not archive On Fri, Jun 14, 2013 at 4:31 PM, wrote: I just got word that I will be presenting a forum at Airventure on painting your homebuilt with latex paint, Wednesday, at 11:30. I plan to camp with my Titan Tornado in the ultralight area. If any of you are attending Airventure please stop by the forum or the camp site and say hi. I hope to be there from Sunday through Friday, weather permitting. See you there Malcolm http://home.comcast.net/~mmorrison123/Airplanes.htm http://home.comcast.net/~mmorrison123/Latex.htm get="_blank">http://www.matronics.com/Navigator?Kolb-List tp://forums.matronics.com _blank">http://www.matronics.com/contribution -- Zulu Delta Mk IIIC Thanks, Homer GBYM It isn't necessary to have relatives in Kansas City in order to be unhappy. - Groucho Marx No virus found in this message. Checked by AVG - www.avg.com 06/15/13 ________________________________ Message 14 ____________________________________ Time: 06:46:24 PM PST US From: "John Hauck" Subject: RE: Kolb-List: Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice What was the length of your prop? Will it give me the same thrust as a three blade IVO. Are there any advantages, disadvantages of a two blade vs a three blade? Appreciate your input! Mahesh Mahesh/Kolbers: Talk with Daryl at Warp Drive. He will give you the correct length. The two blade Warp has several advantages over the three blade: -weight savings of one blade. -overall height of the aircraft is reduced for storage. john h mkIII Grand Island, NE ________________________________ Message 15 ____________________________________ Time: 07:32:36 PM PST US From: "Jack B. Hart" Subject: Re: Kolb-List: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice At 01:23 PM 6/15/2013 -0700, you wrote: > >..........Should I switch to a 3 blade warp drive or just stick to IVO. On the forum I have heard good things on the warp drive prop and since they cost almost the same, I wanted some input from you all and then proceed ahead! > Mahesh, Check out the spec for your gear box to find out the maximum propeller moment of inertia it can swing. Also remember that the smaller the propeller moment of inertia the easier it is for the propeller to absorb the engine torque impulses due to individual cylinder/piston firing impulses. This also translates to less engine generated vibration being transmitted to engine crank, gear box, the cage and gives a smoother ride. Jack B. Hart FF004 Winchester, IN ________________________________ Message 16 ____________________________________ Time: 08:30:23 PM PST US Subject: Kolb-List: Re: Sport aviation mag..... From: "Dnul" http://www.contactmagazine.com/FreeLunch.html -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402773#402773 ________________________________ Message 17 ____________________________________ Time: 08:34:21 PM PST US Subject: Kolb-List: Re: Sport aviation mag..... From: "Dnul" http://www.contactmagazine.com/FreeLunch.html -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402774#402774 ________________________________ Message 18 ____________________________________ Time: 09:19:06 PM PST US Subject: Kolb-List: Re: Sport aviation mag..... From: "Dnul" http://www.contactmagazine.com/FreeLunch.html -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402776#402776 ________________________________ Message 19 ____________________________________ Time: 09:41:34 PM PST US Subject: Kolb-List: Re: IVO Prop Vs Warp Drive - Rotax 503 - FS2 - Advice From: "miyer2u" Thank you John and Jack. I have a 2.28 'B' Box and my current prop is a 3 blade 72 Inch IVO. It has never given me an issues in the last 8 years, Did well on climb and cruise, but if there something better out there in the market then I will surely like to try it out! Mahesh Read this topic online here: http://forums.matronics.com/viewtopic.php?p=402778#402778 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.