---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 06/27/13: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:55 AM - Re: Re: thrust (Richard Girard) 2. 12:24 PM - Re: Re: thrust (Dennis Rowe) 3. 02:08 PM - Re: Re: thrust (GARY JINDRA) 4. 05:25 PM - Re: Fuel pump replacement - 912 (Watkinsdw) 5. 09:30 PM - A.N.U.G. in David City NE this weekend. (Duane Ransdell) ________________________________ Message 1 _____________________________________ Time: 06:55:07 AM PST US Subject: Re: Kolb-List: Re: thrust From: Richard Girard Dennis, Make sure you have the prop extension for the IVO, their blades flex quite a bit more than you Power Fin. Rick Girard do not archive On Wed, Jun 26, 2013 at 1:31 PM, Dennis Rowe wrote: > > This thread has me excited to try a 68 inch two blade Ivo I got from a > friend several years ago and never thought it would be enough blade to > absorb my 70hp. If it works, I'll buy a two blade hub for my Powerfin and > give that a try. > > Dennis "Skid" Rowe > Mk3, 690L-70, Leechburg, PA > > > On Jun 26, 2013, at 9:07 AM, "Richard Pike" wrote: > > > > > [quote="rowedenny"]Richard, do you have the light or medium Ivo blades? > > > > Dennis "Skid" Rowe > > Mk3, 690L-70, Leechburg, PA > > > > [quote] > > > > Just the light ones. > > > > -------- > > Richard Pike > > Kolb MKIII N420P (420ldPoops) > > richard (at) bcchapel(dot)org > > Kingsport, TN 3TN0 > > Now faith is the substance of things hoped for, the evidence of things > not seen. > > Hebrews 11:1 > > > > > > > > > > Read this topic online here: > > > > http://forums.matronics.com/viewtopic.php?p=403454#403454 > > > > > > > > > > > > > > > > > > > > > > -- Zulu Delta Mk IIIC Thanks, Homer GBYM It isn't necessary to have relatives in Kansas City in order to be unhappy. - Groucho Marx ________________________________ Message 2 _____________________________________ Time: 12:24:22 PM PST US Subject: Re: Kolb-List: Re: thrust From: Dennis Rowe Thanks Rick, I have 5.6 inches clearance between the front of the prop and t he back of my fuselage. Just realized I didn't check the flap tube clearance to the prop, will check that and if necessary I'll steal the prop spacer of f my Sport Parasol. Dennis "Skid" Rowe Mk3, 690L-70, Leechburg, PA On Jun 27, 2013, at 9:54 AM, Richard Girard wrote: > Dennis, Make sure you have the prop extension for the IVO, their blades fl ex quite a bit more than you Power Fin. > > Rick Girard > do not archive > > > On Wed, Jun 26, 2013 at 1:31 PM, Dennis Rowe wr ote: >> >> This thread has me excited to try a 68 inch two blade Ivo I got from a fr iend several years ago and never thought it would be enough blade to absorb m y 70hp. If it works, I'll buy a two blade hub for my Powerfin and give that a try. >> >> Dennis "Skid" Rowe >> Mk3, 690L-70, Leechburg, PA >> >> >> >> On Jun 26, 2013, at 9:07 AM, "Richard Pike" wrote: >> >> > >> > [quote="rowedenny"]Richard, do you have the light or medium Ivo blade s? >> > >> > Dennis "Skid" Rowe >> > Mk3, 690L-70, Leechburg, PA >> > >> > [quote] >> > >> > Just the light ones. >> > >> > -------- >> > Richard Pike >> > Kolb MKIII N420P (420ldPoops) >> > richard (at) bcchapel(dot)org >> > Kingsport, TN 3TN0 >> > Now faith is the substance of things hoped for, the evidence of things n ot seen. >> > Hebrews 11:1 >> > >> > >> > >> > >> > Read this topic online here: >> > >> > http://forums.matronics.com/viewtopic.php?p=403454#403454 >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> ========== >> arget="_blank">http://www.matronics.com/Navigator?Kolb-List >> ========== >> http://forums.matronics.com >> ========== >> le, List Admin. >> ="_blank">http://www.matronics.com/contribution >> ========== > > > > -- > Zulu Delta > Mk IIIC > Thanks, Homer GBYM > > It isn't necessary to have relatives in Kansas City in order to be unhappy .. > - Groucho Marx > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 3 _____________________________________ Time: 02:08:05 PM PST US From: GARY JINDRA Subject: Re: Kolb-List: Re: thrust On the Mark 3 IVO requires a 4 inch extension due- to the flexing. There blades do truly move a lot=0A=0AGary Jindra=0AMark 3=0A582 115 hours=0A912 ul 20 hours=0A =0A=0A________________________________=0A From: Dennis Rowe =0ATo: "kolb-list@matronics.com" =0ASent: Thursday, June 27, 2013 3:23 PM=0ASubject: Re: Kolb-List : Re: thrust=0A =0A=0A=0AThanks Rick, I have 5.6 inches clearance between the front of the prop and the back of my fuselage. Just realized I didn't c heck the flap tube clearance to the prop, will check that and if necessary I'll steal the prop spacer off my Sport Parasol.=0A=0ADennis "Skid" Rowe=0A Mk3, 690L-70, Leechburg, PA=0A=0A=0A=0AOn Jun 27, 2013, at 9:54 AM, Richard Girard wrote:=0A=0A=0ADennis, Make sure you have the prop extension for the IVO, their blades flex quite a bit more than you Po wer Fin.=0A>=0A>=0A>Rick Girard=0A>do not archive=0A>=0A>=0A>=0A>On Wed, Ju n 26, 2013 at 1:31 PM, Dennis Rowe wrote:=0A>=0A >>=0A>>This thread has me excited to try a 68 inch two blade Ivo I got from a friend several years ago and never thought it would be enough blade to a bsorb my 70hp. If it works, I'll buy a two blade hub for my Powerfin and gi ve that a try.=0A>>=0A>>Dennis "Skid" Rowe=0A>>Mk3, 690L-70, Leechburg, PA =0A>>=0A>>=0A>>=0A>>On Jun 26, 2013, at 9:07 AM, "Richard Pike" =0A>>>=0A>>> [quote="rowedenny"]Richard, do you have the light or medium Ivo blades?=0A>>>=0A>>> Dennis "Skid" Rowe=0A>>> M k3, 690L-70, Leechburg, PA=0A>>>=0A>>> [quote]=0A>>>=0A>>> Just the light o nes.=0A>>>=0A>>> --------=0A>>> Richard Pike=0A>>> Kolb MKIII N420P (420ldP oops)=0A>>> richard (at) bcchapel(dot)org=0A>>> Kingsport, TN 3TN0=0A>>> No w faith is the substance of things hoped for, the evidence of things not se en.=0A>>> Hebrews 11:1=0A>>>=0A>>>=0A>>>=0A>>>=0A>>> Read this topic online here:=0A>>>=0A>>> http://forums.matronics.com/viewtopic.php?p=403454#403 454=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>=0A>> =0A>>============0A>>arget="_blank">http://www.matr onics.com/Navigator?Kolb-List=0A>>============0A>>htt p://forums.matronics.com=0A>>============0A>>le, List Admin.=0A>>="_blank">http://www.matronics.com/contribution=0A>>=== =========0A>>=0A>>=0A>>=0A>>=0A>=0A>=0A>=0A>-- =0A>=0A>Zulu Delta=0A>Mk IIIC=0A>Thanks, Homer GBYM=0A>=0A>=0A>It isn't necessary to ha ve relatives in Kansas City in order to be unhappy.=0A>- - Groucho Marx D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D ________________________________ Message 4 _____________________________________ Time: 05:25:43 PM PST US Subject: Kolb-List: Re: Fuel pump replacement - 912 From: "Watkinsdw" Spoke to Lockwood today. The Svc Bulletin starts out with the statement that all mechanical fuel pumps have a five year life span, then should be replaced. Then it goes on to describe a problem with Bing pumps. The manual says all rubber hoses should be replaced every five years, and if the fuel lines are integrated with the pump, it should be replaced too. Lockwood said if its an Experimental, the owner/operator makes the call "on condition," which I take to mean, "if it ain't broke, don't fix it." He went on to say Pierberg pumps are tough tough little muthas and he's seen them do fine well after ten years of service. Never mind! Annual is finished, biannual flight review done, plan to go flying this weekend if the weather cooperates! Don't worry, be happy! Dave Watkins Mk III C Read this topic online here: http://forums.matronics.com/viewtopic.php?p=403546#403546 ________________________________ Message 5 _____________________________________ Time: 09:30:39 PM PST US Subject: Kolb-List: A.N.U.G. in David City NE this weekend. From: Duane Ransdell I know this is pretty late posting, but if you are in or around Nebraska this weekend, it's the 14th Annual Nebraska Ultralight Gathering in David City. There is nothing much planned except a bunch of flying and then some more flying with a little bit of additional flying. Oh yeah, and lots of hangar talk and BSing. In the past others have put a lot of time and effort into this event, but the last couple of years everyone has decided to pare it back to what really makes these events fun; Flying! There is a website http://www.anug.org Here's the official announcement Good place to be this week end, is the David City Airport attending the 14th annual =93=94ANUG=94=94 Fly-in event. where you can meet other flying enthusiast and swap lies, BS, etc. What events are planned ???, none, just come and have fun together. Those that fly in or show up tomorrow night Friday, June 28th will get to eat free Pizza. Camping is available at the airport, and auto gas is also available at the airport The weather is going to be clear and sunny , and rather cool Friday-Saturda y and Sunday, with top temperature around 80%, with light NW winds during the early mornings and evening hours, but Gusting up to 16 to 19 during the midday hours. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.