---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Fri 07/12/13: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:13 AM - Re: 912 propeller, 4" prop hub ext, Exhaust for sale (kinne russ) 2. 10:52 AM - Re: Latex Pain Forum (Dnul) 3. 11:08 AM - Re: Jig To Install Hinges (Dnul) 4. 11:22 AM - Re: Drilling Center Of Tube (Dnul) 5. 11:26 AM - Re: Drilling Center Of Tube (Dnul) 6. 11:26 AM - Re: Latex Pain Forum (George Alexander) 7. 05:17 PM - Re: Re: Latex Pain Forum (gliderx5@comcast.net) ________________________________ Message 1 _____________________________________ Time: 06:13:01 AM PST US From: kinne russ Subject: Re: Kolb-List: 912 propeller, 4" prop hub ext, Exhaust for sale Jason Did you have a cowling on the 912? Loox like some mounting tabs in the pic. What aircraft? do not archive On Jul 9, 2013, at 8:54 AM, frank goodnight wrote: > Can you send a larger clearer picture ? I can't see if i can use it from this pic. > Thanks > Frank > > From: Jason Omelchuck > To: kolb-list@matronics.com > Sent: Monday, July 8, 2013 8:21 PM > Subject: Kolb-List: 912 propeller, 4" prop hub ext, Exhaust for sale > > > Hello All, > For the 912 engine I have: > > A 68" 3 bladed taper tip Warp Drive propeller with nickel leading edge $400 > > A 4" propeller hub extension $100 > > A Stainless steel exhaust system (at least I think it is stainless as a magnet just barely sticks to it) $150 Attached is a picture of the exhaust configuration. > > All are in great condition and buyer pays for shipping. > > Regards > Jason Omelchuck > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=404244#404244 > > > > > Attachments: > > http://forums.matronics.com//files/exhaust_167.png > > > > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 10:52:53 AM PST US Subject: Kolb-List: Re: Latex Pain Forum From: "Dnul" How would you use cheap house paint to do a small graphic detail on top of Polytone, on fabric, in order avoid buying some quarts of Polytone? You can get small sample cans of latex mixed colors at Lowes which are intended for people to use in choosing colors. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404545#404545 ________________________________ Message 3 _____________________________________ Time: 11:08:18 AM PST US Subject: Kolb-List: Re: Jig To Install Hinges From: "Dnul" My other tip shows cutting bushings and someone asked "what bushings" on this thread showing the hinge drilling jig. FireFly uses bushings cut from 5/16 ID steel tube. They are used where horizontal stabilizer attaches at the back to the elevator and at the top and bottom of the lift struts. Bushings act as spacers on 5/16 bolts. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404547#404547 ________________________________ Message 4 _____________________________________ Time: 11:22:25 AM PST US Subject: Kolb-List: Re: Drilling Center Of Tube From: "Dnul" That would be great to order for drilling the vertical stabilizer post, the drag strut, or the landing gear leg and the universal joint on the aileron control tube which would be drilled inaccurately. It might be used to drill an innumerable number of holes in small tubing used in the wing. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404548#404548 ________________________________ Message 5 _____________________________________ Time: 11:26:16 AM PST US Subject: Kolb-List: Re: Drilling Center Of Tube From: "Dnul" http://www.skygeek.com/eastern-edf1-drill-rite.html sells the drill guide. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404549#404549 ________________________________ Message 6 _____________________________________ Time: 11:26:16 AM PST US Subject: Kolb-List: Re: Latex Pain Forum From: "George Alexander" Dnul wrote: > How would you use cheap house paint to do a small graphic detail on top of Polytone, on fabric, in order avoid buying some quarts of Polytone? You can get small sample cans of latex mixed colors at Lowes which are intended for people to use in choosing colors. Or develop your graphic and find a sign outfit that does vinyl signs/car wraps. Got the attached "nose art", one for each side (flipped horizontally) for about $30-$35. The oval is about 10" across. Has worn like iron. Colors have not faded (even in FL sun). DO NOT ARCHIVE -------- George Alexander FS II R503 N709FS http://www.oh2fly.net Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404550#404550 Attachments: http://forums.matronics.com//files/noseart_010_medium_602.jpg ________________________________ Message 7 _____________________________________ Time: 05:17:29 PM PST US From: gliderx5@comcast.net Subject: Re: Kolb-List: Re: Latex Pain Forum I painted latex over existing paint on some areas on my Titan Tornado. Some of it had been painted before I bought it, and I'm guessing it was Polytone. I washed the airplane with detergent and TSP to remove dirt and wax. Then just sprayed the thinned latex. The new paint had adhered great. There are a few spots where the base paint let loose of the fabric, but the latex has stayed stuck. If you are thinking of a small logo I would think you could mask and spray with a touch up gun, or just brush it on. Malcolm ----- Original Message ----- From: "Dnul" Sent: Friday, July 12, 2013 1:52:29 PM Subject: Kolb-List: Re: Latex Pain Forum How would you use cheap house paint to do a small graphic detail on top of Polytone, on fabric, in order avoid buying some quarts of Polytone? You can get small sample cans of latex mixed colors at Lowes which are intended for people to use in choosing colors. -------- Dnul Read this topic online here: http://forums.matronics.com/viewtopic.php?p=404545#404545 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.