Today's Message Index:
----------------------
1. 05:53 AM - Re: Re: Xtra Control Problems (John Hauck)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Xtra Control Problems |
Rick G/Kolbers:
Kolb fuselages are not too light to do the bending on the aircraft.
Mine got bent out of alignment on the fuselage, as they got bent back
into alignment on the fuselage.
john h
mkIII
Rock House, Oregon - KISS
As for bending the axles to bring the wheels into the toe in/out
specification you want, remove the axle from the aircraft and bend it in
a press using the TLAR method until it is where you want it. Kolb
fuselages are built too light to do the bending on the aircraft.
As my dear departed Grandma used to say, "there's more than one way to
skin a cat".
No offense to any animal rights activists. :-}
Rick Girard
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|