Today's Message Index:
----------------------
1. 04:25 AM - Re: Rear housing for a Rotax E- gearbox (Dennis Rowe)
2. 03:40 PM - Re: Mark 3 X-tra Dual Controls (Brad Nation)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rear housing for a Rotax E- gearbox |
Hey guys,
Disassembly of the housing and removal of the plug reveled damage to the thr
eads. Looks like someone may have cross threaded the plug and caused the cra
ck, than chased the threads to clean it up. Real butcher. Anyway, it's at th
e weld shop now and I figure I'll have to helicoil the hole after the repair
.
Anyone know what thread those suckers are?
Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA
> On Jun 12, 2014, at 4:38 PM, Roy Spangler <roy.spangler@kirtland.edu> wrot
e:
>
>
> Mr. Rowe,
>
> In as much as it is not a structural issue consider JB Weld
>
>
> fyi
>
>
> roy
>
>
>> On Thu, Jun 12, 2014 at 2:51 PM, John Hauck <jhauck@elmore.rr.com> wrote:
>> Dennis:
>>
>> I feel your pain. Evidently, you are having a case of
>> "Hauck's luck".
>>
>> Better days are coming.
>>
>> john h
>> mkIII
>> Rock House, Oregon
>>
>>
>>
>> -----Original Message-----
>> From: owner-kolb-list-server@matronics.com
>> [mailto:owner-kolb-list-server@matronics.com] On Behalf Of
>> Dennis Rowe
>> Sent: Thursday, June 12, 2014 12:25 PM
>> To: Kolb-list
>> Subject: Kolb-List: Rear housing for a Rotax E- gearbox
>>
>> <rowedenny@windstream.net>
>>
>> Anybody know anyone parting out an E gearbox? I bought a
>> used one with my 670 bottom end and when prepping the engine
>> last night for the test stand I discovered a crack that goes
>> half way around the drain plug and it leaks oil.
>> If I can't find a used housing, I'm going to have to weld
>> it.
>> Apparently a former owner over torqued the drain plug and
>> cracked the housing.
>> The engine builder doesn't think it left his shop like that,
>> but that's the third defect I found in this bottom end since
>> receiving it from him. Also, the crack has dirty oil in it
>> and is definitely not fresh. Also, the drain plug looks like
>> it was through a war.
>> Live and learn.
>> I know damn well I didn't crack it and it wasn't damaged In
>> shipping as the crate was in good condition and well
>> protected.
>> Seriously bummed.
>>
>> Dennis "Skid" Rowe
>> Mk3, 690L-70, Leechburg, PA
>>
>>
>>
>>
>> =
>> Photoshare, and much much more:
>> =
>> =
>> =
>
>
>
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Mark 3 X-tra Dual Controls |
That looks like what I have.
I=92ll have to take some photos as well. But I=92m going out of town so
it won=92t be until next week.
Brad
___________________________
=93Freedom is never more than one generation away from extinction. We
didn't pass it to our children in the bloodstream. It must be fought
for, protected, and handed on for them to do the same, or one day we
will spend our sunset years telling our children and our children's
children what it was once like in the United States where men were
free.=94
-- President Ronald Reagan
On Jun 12, 2014, at 20:52 , Colin Hudson <colin.scott.hudson@gmail.com>
wrote:
> Brad I tried to send this to the list, but the pictures were too big.
To answer your question about you having the right controls. I attached
two pictures. The first is the way my controls arrived from Kolb after
I purchased them. The 2nd is the way they look installed in my M3X-tra.
If you look close you can see the adjustable linkage to put the sticks
centered where they need to be. As I said eariler, I had to remove
them. I just lost too much control with them. You will also notice all
the extra linkage that puts more play in the controls. My center stick
is longer, giving me more leverage and direct connection to the
controls. Hope this helps.
>
> Scott Hudson
> A&P/ATP
>
> N424AL
> <unfinished.JPG><Dual Controls.jpg>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|