Today's Message Index:
----------------------
1. 11:39 AM - Re: video and new mount (B Young)
2. 11:40 AM - Re: video and new mount (B Young)
3. 02:16 PM - Re: video and new mount (Larry Cottrell)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: video and new mount |
Been looking at the camera,,, removed one screw and found the contacts for
the switch...I can run 2 wires out and have a remote....or run 4 wires out
and plug into a D size battery pack and a remote.... that sounds like a
win win... I need to find a good plug
On Jun 22, 2014 4:40 PM, "Larry Cottrell" <lcottrell1020@gmail.com> wrote:
> I got tired of the Jello that I was seeing in my videos, so I decided to
> copy some of the better mounts that I have seen. The one that interested me
> was on the wing. I decided to try the wing support tube that is just
> hanging there to see if I could secure it enough to get a solid mount. You
> of course need a remote to turn on and off your camera, but it is much
> nicer than what I had been using. Here is a short video taken with it.
>
>
> https://vimeo.com/98877897
> <https://vimeo.com/98877897?utm_source=email&utm_medium=clip-transcode_complete-finished-20120100&utm_campaign=7701&email_id=Y2xpcF90cmFuc2NvZGVkfDYxZTUyNzUxOWY2NmI3M2NhNGNmNTgyZmVlMmMyNzQ4MjAzfDc2NDA2NDl8MTQwMzQ3MzIyMHw3NzAx>
> Password- owyheeflyer
>
> Larry
>
> --
> *If you forward this email, or any part of it, please remove my email
> address before sending.*
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: video and new mount |
I did not see jello. Did you try different rpm's?
On Jun 22, 2014 4:40 PM, "Larry Cottrell" <lcottrell1020@gmail.com> wrote:
> I got tired of the Jello that I was seeing in my videos, so I decided to
> copy some of the better mounts that I have seen. The one that interested me
> was on the wing. I decided to try the wing support tube that is just
> hanging there to see if I could secure it enough to get a solid mount. You
> of course need a remote to turn on and off your camera, but it is much
> nicer than what I had been using. Here is a short video taken with it.
>
>
> https://vimeo.com/98877897
> <https://vimeo.com/98877897?utm_source=email&utm_medium=clip-transcode_complete-finished-20120100&utm_campaign=7701&email_id=Y2xpcF90cmFuc2NvZGVkfDYxZTUyNzUxOWY2NmI3M2NhNGNmNTgyZmVlMmMyNzQ4MjAzfDc2NDA2NDl8MTQwMzQ3MzIyMHw3NzAx>
> Password- owyheeflyer
>
> Larry
>
> --
> *If you forward this email, or any part of it, please remove my email
> address before sending.*
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: video and new mount |
There was no jello with the new mount. I am pleased.
Larry
On Mon, Jun 23, 2014 at 12:40 PM, B Young <byoungplumbing@gmail.com> wrote:
> I did not see jello. Did you try different rpm's?
> On Jun 22, 2014 4:40 PM, "Larry Cottrell" <lcottrell1020@gmail.com> wrote:
>
>> I got tired of the Jello that I was seeing in my videos, so I decided to
>> copy some of the better mounts that I have seen. The one that interested me
>> was on the wing. I decided to try the wing support tube that is just
>> hanging there to see if I could secure it enough to get a solid mount. You
>> of course need a remote to turn on and off your camera, but it is much
>> nicer than what I had been using. Here is a short video taken with it.
>>
>>
>> https://vimeo.com/98877897
>> <https://vimeo.com/98877897?utm_source=email&utm_medium=clip-transcode_complete-finished-20120100&utm_campaign=7701&email_id=Y2xpcF90cmFuc2NvZGVkfDYxZTUyNzUxOWY2NmI3M2NhNGNmNTgyZmVlMmMyNzQ4MjAzfDc2NDA2NDl8MTQwMzQ3MzIyMHw3NzAx>
>> Password- owyheeflyer
>>
>> Larry
>>
>> --
>> *If you forward this email, or any part of it, please remove my email
>> address before sending.*
>>
> *
>
>
> *
>
>
--
*If you forward this email, or any part of it, please remove my email
address before sending.*
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|