---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 07/03/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:50 AM - Re: videos (K I) 2. 08:30 AM - Re: Short Field Landings (Roy Spangler) 3. 03:02 PM - EIS tach setting for single CDI Rotax (Dennis Rowe) 4. 06:09 PM - Re: Annual (woody) 5. 06:38 PM - Re: Re: Annual (brubakermal@yahoo.com) 6. 07:30 PM - Re: Re: Annual (kinne russ) 7. 08:35 PM - Re: Re: Annual (Charlie England) ________________________________ Message 1 _____________________________________ Time: 06:50:35 AM PST US From: K I Subject: RE: Kolb-List: videos Hi Boyd=2C That was great! I cant wait to finish up my plane and get up to BMC. I am r esurfacing the IVO leading edge with the stainless steel tape. I need to do some small patching of the old hanger rash still. Just a few more little t hings still need to be done. GREAT VIDEO! Thanks=2C Kurt Mark III 582 DCDI Subject: Re: Kolb-List: videos From: byoungplumbing@gmail.com Funny you see what get when I upload in hd. My alvord uploaded In standard deff=2C with that one I can change the size to larger than the hd video ..go figure. I have another In progress=2C I think I finally got the ca mera straight. We'll see. =0A =0A Boyd=0A On Jul 2=2C 2014 12:36 PM=2C "Larry Cottrell" wro te: =0A I liked it Boyd. It is nice to see other parts of the country where other p eople are flying. The camera seems to do better than I had remembered=2C bu t then again=2C If your terrain is bland=2C then there is a good chance you r pictures might be as well. Yours has some better definition to it than mi ne. Not much green where I fly. I see that your video was produced with a r educed screen size to it as mine was before I changed video programs. Movie make wasn't that way until just recently=2C and that was the reason that I bought another program. Perhaps there is a tweak that will make it full sc reen. If you use "lithium" batteries it will record for about 5 or 6 hours. =0A =0A Larry On Wed=2C Jul 2=2C 2014 at 12:09 PM=2C b young w rote: =0A =0A =0A =0A =0A =0A with my last trip up to Larry=92s home=2C=2C the rock house=2C=2C=2C I =0A picked up Larry's old tachyon micro hd camera...( don=92t tell him=2C=2C =2C we =0A will keep it our secret). on my first video to the =0A Alvord Larry helped me set it up=2C=2C=2C I used Larry's old camera =0A mount=2C on his plane he mounted it on his right wing strut=2C=2C=2C=2C I kind =0A of bent it around a bit and mounted it on my left wing strut... it ended =0A up a bit out of level.... when I got home I made a new camera mount and I =0A am giving it a go. on my first video with the new mount is still a bit out =0A of level... sorry I am working on in. =0A =0A my first video is a flight to the Alvord from Larry=92s =0A home. https://vimeo.com/98587855=0A and the second is a flight up the Bear river. https://vimeo.com/9974832 1=0A =0A the password for both is =0A beekeeper=0A =0A hope this all works.=0A =0A boyd y=0A =0A =0A =0A =0A =0A =0A =0A =0A =0A =0A =0A This email is free from viruses and malware because avast! Antivirus pr otection is active.=0A =0A =0A =0A =0A =0A =0A =0A =0A =0A =0A get="_blank">http://www.matronics.com/Navigator?Kolb-List=0A tp://forums.matronics.com=0A _blank">http://www.matronics.com/contribution=0A =0A -- If you forward this email=2C or any part of it=2C please remove my email ad dress before sending. =0A =0A =0A =0A =0A =0A =0A get="_blank">http://www.matronics.com/Navigator?Kolb-List=0A tp://forums.matronics.com=0A _blank">http://www.matronics.com/contribution=0A =0A =0A =0A =0A =0A ============0A ============0A ============0A ============0A =0A ________________________________ Message 2 _____________________________________ Time: 08:30:04 AM PST US Subject: Re: Kolb-List: Short Field Landings From: Roy Spangler The old guys sideslipped before flaps roy On Wed, Jul 2, 2014 at 11:08 AM, Charlie England wrote: > > > On 7/1/2014 9:38 PM, Larlaeb wrote: > >> >> Went out this morning and practiced landing a bit. I setup a camera to >> see what it looked like from the ground side of things. There was >> basically no wind at ground level and I placed the camera 400 feet from the >> threshold of the runway. I seldom actually hit the threshold because >> there are power lines on that end and they make me nervous. On all the >> landings power was set at idle on the downwind and not touched until I was >> on the ground. All these were made with full flaps. I'm sharing this not >> because I think I'm particularly good at it as you can see, but because it >> was fun to do. Hopefully you won't find it too boring. >> >> https://docs.google.com/file/d/0BxdXwdWJkFExd2hiWE9fRDRjaXc/edit >> >> >> Thanks, >> Allan >> >> Love the format. Seeing the cockpit view, flight data, and the ground > perspective at the same time is really nice. > > On the subject of power lines, have you thought about contacting the power > company to have their 'orange balls' added to the lines? They will probably > try to charge you, but one of the original members of my airpark pitched it > this way: when they asked for payment, he pointed out that the power > company owned the lines, and if someone couldn't see them & it caused a > crash, the power company would be liable. They installed the balls for free. > > Charlie > > ________________________________ Message 3 _____________________________________ Time: 03:02:00 PM PST US From: Dennis Rowe Subject: Kolb-List: EIS tach setting for single CDI Rotax Tach seems to read a little low on the 670, anyone out there know the programmable EIS tach setting for a 447 or 377, should be the same as my 670. Dennis "Skid" Rowe Mk3, 690L-70, Leechburg, PA ________________________________ Message 4 _____________________________________ Time: 06:09:23 PM PST US Subject: Kolb-List: Re: Annual From: "woody" When I first purchased my Firestar II, I had an A&P do an annual for me. He charged me the outrageous sum of $50. There are no panels to open & no hidden control housings. He took about half an hour & I was right beside him. We then did a weight & balance to check the numbers. The paperwork took almost as much time....... :) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=426045#426045 ________________________________ Message 5 _____________________________________ Time: 06:38:13 PM PST US From: "brubakermal@yahoo.com" Subject: Re: Kolb-List: Re: Annual $50.- omg I only charge. $42=0A=0ASent from Yahoo Mail on Android=0A=0A ________________________________ Message 6 _____________________________________ Time: 07:30:48 PM PST US Subject: Re: Kolb-List: Re: Annual From: kinne russ Woody. I don't know where you are, but $50 seems reasonable to me (I'm in Maine) for an hour's work by a certified professional, who's spent a lot of time & money getting certified. Russ K On Jul 3, 2014, at 9:09 PM, woody wrote: > > When I first purchased my Firestar II, I had an A&P do an annual for me. > He charged me the outrageous sum of $50. There are no panels to open & > no hidden control housings. He took about half an hour & I was right beside him. We then did a weight & balance to check the numbers. The paperwork took almost as much time....... :) > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=426045#426045 > > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 08:35:51 PM PST US From: Charlie England Subject: Re: Kolb-List: Re: Annual Russ, I don't know, but strongly suspect that there was a missing ;-) in that message from woody. Charlie On 7/3/2014 9:30 PM, kinne russ wrote: > > Woody. > I don't know where you are, but $50 seems reasonable to me (I'm in Maine) for an hour's work by a certified professional, who's spent a lot of time & money getting certified. > Russ K > > > On Jul 3, 2014, at 9:09 PM, woody wrote: > >> >> When I first purchased my Firestar II, I had an A&P do an annual for me. >> He charged me the outrageous sum of $50. There are no panels to open & >> no hidden control housings. He took about half an hour & I was right beside him. We then did a weight & balance to check the numbers. The paperwork took almost as much time....... :) >> >> >> ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.