Kolb-List Digest Archive

Sat 09/06/14


Total Messages Posted: 9



Today's Message Index:
----------------------
 
     1. 07:49 AM - Re: Rudder Failure on my Xtra. (Richard Girard)
     2. 08:00 AM - Leaking carb floats (Richard Girard)
     3. 08:18 AM - Re: Rudder Failure on my Xtra. (John Hauck)
     4. 11:04 AM - Re: See kolb (joe)
     5. 04:29 PM - Re: Rudder Failure on my Xtra. (kinne russ)
     6. 04:56 PM - Re: Rudder Failure on my Xtra. (undoctor)
     7. 04:56 PM - Re: Rudder Failure on my Xtra. (John Hauck)
     8. 04:57 PM - Re: Rudder Failure on my Xtra. (Larry Cottrell)
     9. 07:50 PM - Re: Rudder Failure on my Xtra. (Brad Nation)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:49:11 AM PST US
    Subject: Re: Rudder Failure on my Xtra.
    From: Richard Girard <aslsa.rng@gmail.com>
    Denny, I don't know which model Kolb you have, but if it's a Mk III the next time you're flying take your feet off the rudder pedals. That's why you want a firm connection between pedals and rudder. Rick Girard do not archive On Fri, Sep 5, 2014 at 9:09 AM, Denny Baber <baberdk@gmail.com> wrote: > Has anyone thought about putting springs in series with the rudder cables > to prevent overstressing the parts? > > Sincerely, > Denny Baber > > do not archive > > * > > > * > > -- Zulu Delta Mk IIIC Thanks, Homer GBYM It isn't necessary to have relatives in Kansas City in order to be unhappy. - Groucho Marx


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:00:28 AM PST US
    Subject: Leaking carb floats
    From: Richard Girard <aslsa.rng@gmail.com>
    Besides checking with Rotax for info on bad floats you might want to check with the Bing Agency, too. http://www.bingcarburetor.com/ Rick Girard -- Zulu Delta Mk IIIC Thanks, Homer GBYM Believe those who are seeking for the truth, doubt those who find it. - Andre Gide


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:18:21 AM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Rudder Failure on my Xtra.
    I have tension on my rudder pedals feet on or off. Kolbs, most of them, suffer from rudder shuffle, which may lead into rudder flutter if ignored, which is easy to do on long cross country flights over boring terrain. I double spring'd my rudder pedals which eliminates rudder shuffle. Richard Pike eliminated the problem on his MKIIIc by designing a rudder counter balance weight. Overstressing the rudder control system is a pilot problem. Depends on how badly you scare yourself. I've been around Kolb airplanes for a good while. First time I have heard of a rudder bell crank failure on a MKIIIx. The other model Kolbs don't use that system. I can testify how much abuse rudder pedals can take by relating a few of my accidents and screw ups. Sudden stops will peg the G meter in forward deceleration. Imagine what kind of stress that puts on the rudder pedals. john h mkIII Titus, Alabama - Packing my bag and loading my MKIII for an early morning departure in the morning. All I have to do is get up and get going. Denny, I don't know which model Kolb you have, but if it's a Mk III the next time you're flying take your feet off the rudder pedals. That's why you want a firm connection between pedals and rudder. Rick Girard do not archive


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:04:26 AM PST US
    Subject: Re: See kolb
    From: "joe" <okjoek2000@yahoo.com>
    Want to say thanks to Rex who has offered to show me his Kolb, hope to make it there to see his, and to Frank who I did meet with, I don't know if I will ever see a nicer one than his. Very impressive machine. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=430122#430122


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:29:27 PM PST US
    Subject: Re: Rudder Failure on my Xtra.
    From: kinne russ <russk50@gmail.com>
    HEY JOHN BONG VOYAGE AND HAVE A GREAT FLITE! WE ALL ENVY YOU RUSS


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:56:10 PM PST US
    Subject: Re: Rudder Failure on my Xtra.
    From: undoctor <undoctor@ptd.net>
    RGl0dG8gdGhhdCwgSm9obi4gQmlnIHRpbWUgZW52eSEKCkRhdmUgS3VscApEbyBub3QgYXJjaGl2 ZQoKClNlbnQgZnJvbSBteSBWZXJpem9uIFdpcmVsZXNzIDRHIExURSBTbWFydHBob25lCgo8ZGl2 Pi0tLS0tLS0tIE9yaWdpbmFsIG1lc3NhZ2UgLS0tLS0tLS08L2Rpdj48ZGl2PkZyb206IGtpbm5l IHJ1c3MgPHJ1c3NrNTBAZ21haWwuY29tPiA8L2Rpdj48ZGl2PkRhdGU6MDkvMDYvMjAxNCAgNzoy OSBQTSAgKEdNVC0wNTowMCkgPC9kaXY+PGRpdj5Ubzoga29sYi1saXN0QG1hdHJvbmljcy5jb20g PC9kaXY+PGRpdj5TdWJqZWN0OiBSZTogS29sYi1MaXN0OiBSdWRkZXIgRmFpbHVyZSBvbiBteSBY dHJhLiA8L2Rpdj48ZGl2Pgo8L2Rpdj4tLT4gS29sYi1MaXN0IG1lc3NhZ2UgcG9zdGVkIGJ5OiBr aW5uZSBydXNzIDxydXNzazUwQGdtYWlsLmNvbT4KCkhFWSBKT0hOCkJPTkcgVk9ZQUdFIEFORCBI QVZFIEEgR1JFQVQgRkxJVEUhCldFIEFMTCBFTlZZIFlPVQpSVVNTCgpfLT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQpfLT0gICAgICAg ICAgLSBUaGUgS29sYi1MaXN0IEVtYWlsIEZvcnVtIC0KXy09IFVzZSB0aGUgTWF0cm9uaWNzIExp c3QgRmVhdHVyZXMgTmF2aWdhdG9yIHRvIGJyb3dzZQpfLT0gdGhlIG1hbnkgTGlzdCB1dGlsaXRp ZXMgc3VjaCBhcyBMaXN0IFVuL1N1YnNjcmlwdGlvbiwKXy09IEFyY2hpdmUgU2VhcmNoICYgRG93 bmxvYWQsIDctRGF5IEJyb3dzZSwgQ2hhdCwgRkFRLApfLT0gUGhvdG9zaGFyZSwgYW5kIG11Y2gg bXVjaCBtb3JlOgpfLT0KXy09ICAgLS0+IGh0dHA6Ly93d3cubWF0cm9uaWNzLmNvbS9OYXZpZ2F0 b3I/S29sYi1MaXN0Cl8tPQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PQpfLT0gICAgICAgICAgICAgICAtIE1BVFJPTklDUyBXRUIg Rk9SVU1TIC0KXy09IFNhbWUgZ3JlYXQgY29udGVudCBhbHNvIGF2YWlsYWJsZSB2aWEgdGhlIFdl YiBGb3J1bXMhCl8tPQpfLT0gICAtLT4gaHR0cDovL2ZvcnVtcy5tYXRyb25pY3MuY29tCl8tPQpf LT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PQpfLT0gICAgICAgICAgICAgLSBMaXN0IENvbnRyaWJ1dGlvbiBXZWIgU2l0ZSAtCl8tPSAg VGhhbmsgeW91IGZvciB5b3VyIGdlbmVyb3VzIHN1cHBvcnQhCl8tPSAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgIC1NYXR0IERyYWxsZSwgTGlzdCBBZG1pbi4KXy09ICAgLS0+IGh0dHA6Ly93 d3cubWF0cm9uaWNzLmNvbS9jb250cmlidXRpb24KXy09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0KCgoK


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:56:56 PM PST US
    From: "John Hauck" <jhauck@elmore.rr.com>
    Subject: Rudder Failure on my Xtra.
    Wish you all could fly along with me. john -----Original Message----- From: owner-kolb-list-server@matronics.com [mailto:owner-kolb-list-server@matronics.com] On Behalf Of kinne russ Sent: Saturday, September 06, 2014 6:29 PM Subject: Re: Kolb-List: Rudder Failure on my Xtra. HEY JOHN BONG VOYAGE AND HAVE A GREAT FLITE! WE ALL ENVY YOU RUSS


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:57:00 PM PST US
    Subject: Re: Rudder Failure on my Xtra.
    From: Larry Cottrell <lcottrell1020@gmail.com>
    On Sat, Sep 6, 2014 at 5:29 PM, kinne russ <russk50@gmail.com> wrote: > > HEY JOHN > BONG VOYAGE AND HAVE A GREAT FLITE! > WE ALL ENVY YOU > RUSS > > Yeah, but John doesn't smoke! :-) Larry > > -- *If you forward this email, or any part of it, please remove my email address before sending.*


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:50:20 PM PST US
    From: Brad Nation <nationcap@comcast.net>
    Subject: Re: Rudder Failure on my Xtra.
    You think we could stay with the topic of the original post? Just a suggestion :-) Yellow Bird 1 Brad Nation MKIII Xtra N952DK On Sep 6, 2014, at 17:29 , kinne russ <russk50@gmail.com> wrote: > > HEY JOHN > BONG VOYAGE AND HAVE A GREAT FLITE! > WE ALL ENVY YOU > RUSS > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   kolb-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Kolb-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/kolb-list
  • Browse Kolb-List Digests
  •   http://www.matronics.com/digest/kolb-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --