---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 10/09/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:41 AM - Folding a MKIII (Jason Omelchuck) 2. 02:47 PM - GRT EIS for sale (Charlie England) 3. 02:52 PM - Re: GRT EIS for sale (Charlie England) 4. 03:10 PM - Re: Re: GRT EIS for sale (Paule David) 5. 03:29 PM - Re: GRT EIS for sale (Paule David) 6. 04:26 PM - idle mixture air adjust screw, O-ring (Stuart Harner) 7. 04:35 PM - Re: idle mixture air adjust screw, O-ring (B Young) ________________________________ Message 1 _____________________________________ Time: 08:41:55 AM PST US Subject: Kolb-List: Folding a MKIII From: "Jason Omelchuck" At about the 6 minute mark of this video there is a picture sequence of folding my MKIII. It is a little different than the Fire Fly because the struts do not hold the wing up, you have to have a stand. I folded every time I flew. https://www.youtube.com/watch?v=AL-IsBKFPjU FWIW Jason Read this topic online here: http://forums.matronics.com/viewtopic.php?p=431681#431681 ________________________________ Message 2 _____________________________________ Time: 02:47:47 PM PST US Subject: Kolb-List: GRT EIS for sale From: Charlie England Is there any interest here for a used Grand Rapids Engine Information System? I've got a model EIS-3-Adv-W/912 Dual Aux but I need more inputs for my application. I've got the harness and most, if not all of the probes. This is one of the older models with two 9-pin connectors, and is in excellent condition; previously installed in an RV-6 built by an airline pilot, monitoring a rotary engine. If you need one, drop me a line or give me a call. Convince me that it's worth more to you than it's worth as upgrade bait at GRT for a 4000 or 6000. :-) Thanks, Charlie ________________________________ Message 3 _____________________________________ Time: 02:52:16 PM PST US Subject: Kolb-List: Re: GRT EIS for sale From: Charlie England On Thu, Oct 9, 2014 at 4:47 PM, Charlie England wrote: > Is there any interest here for a used Grand Rapids Engine Information > System? > > I've got a model EIS-3-Adv-W/912 Dual Aux but I need more inputs for my > application. I've got the harness and most, if not all of the probes. This > is one of the older models with two 9-pin connectors, and is in excellent > condition; previously installed in an RV-6 built by an airline pilot, > monitoring a rotary engine. > > If you need one, drop me a line or give me a call. Convince me that it's > worth more to you than it's worth as upgrade bait at GRT for a 4000 or > 6000. :-) > OOPS; forgot my phone number: 601-879-9596 > > Thanks, > > Charlie > ________________________________ Message 4 _____________________________________ Time: 03:10:33 PM PST US Subject: Re: Kolb-List: Re: GRT EIS for sale From: Paule David Charlie, Thanks for thinking of me! I haven't decided upon my EMS yet. If I go with the Sport SX, which is being phased out, then I'll want a 4000. But if I go with a Mini-x or Mini-AP, then I'll need a third-party EMS. Since I haven't started the fuselage yet, I can wait a bit for that decision. Leading candidates would be a new GRT EMS, the MGL small EMS or even the ancient Dynon one. Thanks again, Dave On Oct 9, 2014, at 3:51 PM, Charlie England wrote: On Thu, Oct 9, 2014 at 4:47 PM, Charlie England wrote: Is there any interest here for a used Grand Rapids Engine Information System? I've got a model EIS-3-Adv-W/912 Dual Aux but I need more inputs for my application. I've got the harness and most, if not all of the probes. This is one of the older models with two 9-pin connectors, and is in excellent condition; previously installed in an RV-6 built by an airline pilot, monitoring a rotary engine. If you need one, drop me a line or give me a call. Convince me that it's worth more to you than it's worth as upgrade bait at GRT for a 4000 or 6000. :-) OOPS; forgot my phone number: 601-879-9596 Thanks, Charlie http://www.matronics.com/Navigator?Kolb-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 5 _____________________________________ Time: 03:29:38 PM PST US Subject: Re: Kolb-List: GRT EIS for sale From: Paule David Oops, sorry, didn't realize that was to the Kolb List. Do not archive. Dave ________________________________ Message 6 _____________________________________ Time: 04:26:32 PM PST US From: "Stuart Harner" Subject: Kolb-List: idle mixture air adjust screw, O-ring OK guys, since my idle mixture screw does not look like the ones in the book (#6 in the drawing), I have a question. Which is the proper position for the O-ring? Next to the threads, or in the groove closest to the head? When I took the carb (Bing 54) apart for an overhaul last winter, I forgot to take pictures as I went. No problem, I have a parts drawing, and there were no two parts alike, so things can only go in one place. When I went to put it back together, I had a little debate with myself about the placement of this O-ring and the parts drawing was no help. I used my "best logic" as to where to put it. I think I was wrong and will continue the story after I hear some replies. :) BTW, I did a full break in routine on the 447 today. I did not need to as Herb had done it originally, but wanted to get some experience with this engine. This gave me a chance to watch all the temps through all the ranges. It was quite an education. All appears well except for a mid-range lean problem, which I worked around by using the enricher circuit to cool it off while in that RPM range. All is well, except for a leaking bowl gasket, time for taxi testing! Stuart ________________________________ Message 7 _____________________________________ Time: 04:35:06 PM PST US Subject: Re: Kolb-List: idle mixture air adjust screw, O-ring From: B Young I would put it in the groove closest to the screw driver slot ( head) Boyd ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.