Today's Message Index:
----------------------
1. 06:31 AM - Re: idle mixture air adjust screw, O-ring (Stuart Harner)
2. 04:26 PM - q (kinne russ)
3. 04:31 PM - Re: q (Frank Goodnight)
4. 04:46 PM - q (kinne russ)
5. 05:21 PM - Re: q (Charlie England)
6. 05:32 PM - Re: q (kinne russ)
7. 06:41 PM - Re: q (Charlie England)
8. 06:58 PM - Re: q (pipercolt)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | idle mixture air adjust screw, O-ring |
That is what I thought too. Why else would there be an O-ring sized
groove in the screw?
As it turns out, I could not get it to idle properly, even with the
screw turned all the way in, it was still too lean.
After moving the O-ring to be next to the threads and setting the screw
to =C2=BD turn, I was able to dial in the idle mixture by turning the
screw only a tiny amount.
It would have been a lot easier if the screw were not on the propeller
side of the carb, but what the heck it worked!
Thanks,
Stuart
From: owner-kolb-list-server@matronics.com
[mailto:owner-kolb-list-server@matronics.com] On Behalf Of B Young
Sent: Thursday, October 09, 2014 6:35 PM
Subject: Re: Kolb-List: idle mixture air adjust screw, O-ring
I would put it in the groove closest to the screw driver slot ( head)
Boyd
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hello Kolbers!
Anyone have a left-side solid aluminum gear leg for sale, or a pair of legs?
Russ K
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Russ,
Dan @ 402-750-6149 probably has a set for a Firestar .
Good luck
Frank Goodnight
Sent from my iPad
On Oct 10, 2014, at 6:26 PM, kinne russ <russk50@gmail.com> wrote:
>
> Hello Kolbers!
> Anyone have a left-side solid aluminum gear leg for sale, or a pair of legs?
> Russ K
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Sorry, shoulda mentioned; legs are for an Xtra
Begin forwarded message:
> From: kinne russ <russk50@gmail.com>
> Date: October 10, 2014 7:26:11 PM EDT
> To: kolb-list@matronics.com
> Subject: q
> content-type: text/plain; charset=us-ascii
> content-transfer-encoding: 7bit
> x-smtp-server: smtp.gmail.com:russk50@gmail.com
> x-universally-unique-identifier: 2647b850-4b07-41da-8a97-34d3ff17e3dc
> message-id: <14313D47-C8A6-472F-8204-3187B123B69B@gmail.com>
> mime-version: 1.0 (Apple Message framework v1085)
>
> Hello Kolbers!
> Anyone have a left-side solid aluminum gear leg for sale, or a pair of
legs?
> Russ K
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Would probably be helpful to put the subject matter in the subject line,
too. :-)
A look through the archives (or an email inbox) for subject line 'q'
reveals nothing at all about the contents of the email. Something like
'WTB Xtra gear legs' would let readers know immediately whether they
might be able to help you.
FWIW,
Charlie
On 10/10/2014 6:46 PM, kinne russ wrote:
> Sorry, shoulda mentioned; legs are for an Xtra
>
>
> Begin forwarded message:
>
>> *From: *kinne russ <russk50@gmail.com <mailto:russk50@gmail.com>>
>> *Date: *October 10, 2014 7:26:11 PM EDT
>> *To: *kolb-list@matronics.com <mailto:kolb-list@matronics.com>
>> *Subject: **q*
>> *content-type: *text/plain; charset=us-ascii
>> *content-transfer-encoding: *7bit
>> *x-smtp-server: *smtp.gmail.com:russk50@gmail.com
>> *x-universally-unique-identifier: *2647b850-4b07-41da-8a97-34d3ff17e3dc
>> *message-id: *<14313D47-C8A6-472F-8204-3187B123B69B@gmail.com
>> <mailto:14313D47-C8A6-472F-8204-3187B123B69B@gmail.com>>
>> *mime-version: *1.0 (Apple Message framework v1085)
>>
>> Hello Kolbers!
>> Anyone have a left-side solid aluminum gear leg for sale, or a pair
>> of legs?
>> Russ K
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Charlie
Thanx the suggestion. Confusers hate me. I'll try better, What's WTB?
Want To Buy?
Russ
On Oct 10, 2014, at 8:22 PM, Charlie England wrote:
> Would probably be helpful to put the subject matter in the subject
line, too. :-)
>
> A look through the archives (or an email inbox) for subject line 'q'
reveals nothing at all about the contents of the email. Something like
'WTB Xtra gear legs' would let readers know immediately whether they
might be able to help you.
>
> FWIW,
>
> Charlie
>
>
>
> On 10/10/2014 6:46 PM, kinne russ wrote:
>> Sorry, shoulda mentioned; legs are for an Xtra
>>
>>
>>
>> Begin forwarded message:
>>
>>> From: kinne russ <russk50@gmail.com>
>>> Date: October 10, 2014 7:26:11 PM EDT
>>> To: kolb-list@matronics.com
>>> Subject: q
>>> content-type: text/plain; charset=us-ascii
>>> content-transfer-encoding: 7bit
>>> x-smtp-server: smtp.gmail.com:russk50@gmail.com
>>> x-universally-unique-identifier:
2647b850-4b07-41da-8a97-34d3ff17e3dc
>>> message-id: <14313D47-C8A6-472F-8204-3187B123B69B@gmail.com>
>>> mime-version: 1.0 (Apple Message framework v1085)
>>>
>>> Hello Kolbers!
>>> Anyone have a left-side solid aluminum gear leg for sale, or a pair
of legs?
>>> Russ K
>>
>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Correct!
Still useful to give a detailed message in the body of the message; I'm
sure that you're not the only person that could miss the acronym (I
don't know 90% of them, myself).
Charlie
On 10/10/2014 7:32 PM, kinne russ wrote:
> Charlie
> Thanx the suggestion. Confusers hate me. I'll try better, What's WTB?
> Want To Buy?
> Russ
>
>
> On Oct 10, 2014, at 8:22 PM, Charlie England wrote:
>
>> Would probably be helpful to put the subject matter in the subject
>> line, too. :-)
>>
>> A look through the archives (or an email inbox) for subject line 'q'
>> reveals nothing at all about the contents of the email. Something
>> like 'WTB Xtra gear legs' would let readers know immediately whether
>> they might be able to help you.
>>
>> FWIW,
>>
>> Charlie
>>
>>
>>
>> On 10/10/2014 6:46 PM, kinne russ wrote:
>>> Sorry, shoulda mentioned; legs are for an Xtra
>>>
>>>
>>>
>>> Begin forwarded message:
>>>
>>>> *From: *kinne russ <russk50@gmail.com <mailto:russk50@gmail.com>>
>>>> *Date: *October 10, 2014 7:26:11 PM EDT
>>>> *To: *kolb-list@matronics.com <mailto:kolb-list@matronics.com>
>>>> *Subject: **q*
>>>> *content-type: *text/plain; charset=us-ascii
>>>> *content-transfer-encoding: *7bit
>>>> *x-smtp-server: *smtp.gmail.com:russk50@gmail.com
>>>> *x-universally-unique-identifier: *2647b850-4b07-41da-8a97-34d3ff17e3dc
>>>> *message-id: *<14313D47-C8A6-472F-8204-3187B123B69B@gmail.com
>>>> <mailto:14313D47-C8A6-472F-8204-3187B123B69B@gmail.com>>
>>>> *mime-version: *1.0 (Apple Message framework v1085)
>>>>
>>>> Hello Kolbers!
>>>> Anyone have a left-side solid aluminum gear leg for sale, or a pair
>>>> of legs?
>>>> Russ K
>>>
>>
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hey Russ
I have a left gear leg off a Mark 111 Classic. I don't know if they are the same.
If interested, call me at 765-346-2622
Bob
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=431758#431758
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|