---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 10/23/14: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:39 AM - Re: M3X Roll Problems (b young) 2. 10:29 AM - Re: M3X Roll Problems (Jason Omelchuck) 3. 11:35 AM - The UltraStar is sold (Beauford) 4. 11:47 AM - Re: Re: M3X Roll Problems () 5. 12:55 PM - Damaged FS II for sale, N-numbered and registered ELSA (Lanny) 6. 05:37 PM - Kolbra I been try to sell my kolbra , Im down to 16500.00 really nice flying, You can see it on youtube pull it up type in Kolbra short feild take- off. It been on barnstormers and trade a plane and no (Larry Gitt) 7. 05:59 PM - Re: Kolbra I been try to sell my kolbra , Im down to 16500.00 really nice flying, You can see it on youtube pull it up type in Kolbra short feild take- off. It been on barnstormers and trade a plane and no (pcking) ________________________________ Message 1 _____________________________________ Time: 08:39:48 AM PST US From: "b young" Subject: Kolb-List: Re: M3X Roll Problems did Kolb send instructions as to what angle the spade should be mounted? boyd young >>>> I don't know how they worked, I never installed them. I have seen them on a MKIII but I never tried them. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ________________________________ Message 2 _____________________________________ Time: 10:29:40 AM PST US Subject: Kolb-List: Re: M3X Roll Problems From: "Jason Omelchuck" Typically you would mount them with he spade parallel to the airflow in level flight. When you deflect the surface you also expose the surface of the spade to the airflow and it helps move the surface. Size of the spade is what would be the unknown. Just how much area do you need to get the results you want without over stressing the aileron system or introducing roll rates that the wing is not designed to handle. Jason byoungplumbing(at)gmail.c wrote: > did Kolb send instructions as to what angle the spade should be mounted? > > boyd young > > > > >>> > > > > > > I don't know how they worked, I never installed them. I have seen them on a > MKIII > but I never tried them. > > > --- > This email is free from viruses and malware because avast! Antivirus protection is active. > http://www.avast.com Read this topic online here: http://forums.matronics.com/viewtopic.php?p=432187#432187 ________________________________ Message 3 _____________________________________ Time: 11:35:47 AM PST US From: "Beauford " Subject: Kolb-List: The UltraStar is sold Kolbers: The UltraStar which was for sale in Wimauma, FL has been sold. The gentleman who was selling it reported that the response to the Kolb List ad was brisk. Worth what he paid fer it. beauford FF-076 Brandon, FL Do Not Archive ________________________________ Message 4 _____________________________________ Time: 11:47:26 AM PST US Subject: Re: Kolb-List: Re: M3X Roll Problems From: Complicating this is the flaperons both droop, putting both spades under load. Not sure how well that works. On Thu, Oct 23, 2014 at 1:29 PM, Jason Omelchuck wrote: > > Typically you would mount them with he spade parallel to the airflow in > level flight. When you deflect the surface you also expose the surface of > the spade to the airflow and it helps move the surface. Size of the spade > is what would be the unknown. Just how much area do you need to get the > results you want without over stressing the aileron system or introducing > roll rates that the wing is not designed to handle. > > Jason > > > byoungplumbing(at)gmail.c wrote: > > did Kolb send instructions as to what angle the spade should be mounted? > > > > boyd young > > > > > > > >>> > > > > > > > > > > I don't know how they worked, I never installed them. I have seen them > on a > > MKIII > > but I never tried them. > > > > > > --- > > This email is free from viruses and malware because avast! Antivirus > protection is active. > > http://www.avast.com > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=432187#432187 > > ________________________________ Message 5 _____________________________________ Time: 12:55:16 PM PST US From: "Lanny" Subject: Kolb-List: Damaged FS II for sale, N-numbered and registered ELSA After an axel bracket failure, and nose over, upon landing in August of 2013. I have decided to sell my FSII rather then repairing it. There was extensive damage to the cage and boom tube, also damage to one wing tip. I am asking $3500.00 for aircraft, Rotax 503 DCDI with electric starter, 72 hours on the hour meter. Includes the following, three blade Ivo Prop, BRS 5 VLS 750 repack expired 12/13, rocket good until 2020. Manual brakes, Kuntzelman strobes, dual fuel gauges, blue prints and manuals. Open aluminum diamond plate trailer large enough to haul the FSII, includes three spare rims and tires. Or $3000.00 without the trailer, $2500 without the trailer and BRS. Sold as is where is. First person that hands me the money, and signs a sales agreement, owns it. (cash or certified check) Located near Catawissa, Pa. 17820. E-mail is donaho1@verizon.net. Phone is #570-799-0198 if I don`t answer leave a message. Please only contact me if you are a serious buyer. ________________________________ Message 6 _____________________________________ Time: 05:37:31 PM PST US Subject: Kolb-List: Kolbra I been try to sell my kolbra , Im down to 16500.00 really nice flying, You can see it on youtube pull it up type in Kolbra short feild take- off. It been on barnstormers and trade a plane and no From: Larry Gitt a plane I keep dropping the price What I'm doing wrong =8B ________________________________ Message 7 _____________________________________ Time: 05:59:27 PM PST US From: "pcking" Subject: Re: Kolb-List: Kolbra I been try to sell my kolbra , Im down to 16500.00 really nice flying, You can see it on youtube pull it up type in Kolbra short feild take- off. It been on barnstormers and trade a plane and no Where you are advertising this beauty may be part of the problem. I can't find it on eBay or Barnstormers. ----- Original Message ----- From: Larry Gitt To: Diget Server, Kolb-List Sent: Thursday, October 23, 2014 8:36 PM Subject: Kolb-List: Kolbra I been try to sell my kolbra , Im down to 16500.00 really nice flying, You can see it on youtube pull it up type in Kolbra short feild take- off. It been on barnstormers and trade a plane and no a plane I keep dropping the price What I'm doing wrong =8B ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.