---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Tue 03/17/15: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:03 AM - MK III - New Nose (Larlaeb) 2. 09:50 AM - Re: MK III - New Nose (Larry Cottrell) 3. 10:00 AM - Re: MK III - New Nose (Larlaeb) 4. 10:08 AM - Re: MK III - New Nose - Nice Job (pcking) 5. 10:19 AM - Re: MK III - New Nose - Nice Job (west1m) 6. 10:25 AM - Re: Re: MK III - New Nose - Nice Job (pcking) 7. 11:14 AM - Re: Re: MK III - New Nose (Larry Cottrell) 8. 11:44 AM - Re: MK III - New Nose - Nice Job (Larlaeb) 9. 11:46 AM - Re: FireFly Page Is Back UP (fxflyr) 10. 12:01 PM - Re: Re: MK III - New Nose - Nice Job (pcking) 11. 12:10 PM - Re: Flight Simulator Aircraft Configuration For Kolb (Larlaeb) ________________________________ Message 1 _____________________________________ Time: 09:03:46 AM PST US Subject: Kolb-List: MK III - New Nose From: "Larlaeb" Damaged my nose cone and since a new one was not available I had to make one from scratch. Obviously changed the look a bit and I'm not sure if I'm happy with it yet or not. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439470#439470 Attachments: http://forums.matronics.com//files/newnose_900.jpg ________________________________ Message 2 _____________________________________ Time: 09:50:51 AM PST US Subject: Re: Kolb-List: MK III - New Nose From: Larry Cottrell Well it is a bit different, but that's not to say that one wouldn't get used to it. Perhaps you should rename the plane to "Woody" . It does have that penetrating look. You just need a Walter Lanz sound track to go with it when landing. :-) Larry On Tue, Mar 17, 2015 at 10:03 AM, Larlaeb wrote: > > Damaged my nose cone and since a new one was not available I had to make > one from scratch. Obviously changed the look a bit and I'm not sure if I'm > happy with it yet or not. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=439470#439470 > > > Attachments: > > http://forums.matronics.com//files/newnose_900.jpg > > -- *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 3 _____________________________________ Time: 10:00:40 AM PST US Subject: Kolb-List: Re: MK III - New Nose From: "Larlaeb" You think maybe some eyes and a more 'beak' like color scheme might help? :) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439477#439477 ________________________________ Message 4 _____________________________________ Time: 10:08:36 AM PST US From: "pcking" Subject: Kolb-List: Re: MK III - New Nose - Nice Job What's wrong with it. It looks factory. You did a nice job. I wouldn't change a thing. ----- Original Message ----- From: "Larlaeb" Sent: Tuesday, March 17, 2015 1:00 PM Subject: Kolb-List: Re: MK III - New Nose > > You think maybe some eyes and a more 'beak' like color scheme might help? > :) > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=439477#439477 > > > ________________________________ Message 5 _____________________________________ Time: 10:19:43 AM PST US Subject: Kolb-List: Re: MK III - New Nose - Nice Job From: "west1m" Looks Great! any picts of the building process? -------- West1m Hastings, MN Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439479#439479 ________________________________ Message 6 _____________________________________ Time: 10:25:21 AM PST US From: "pcking" Subject: Re: Kolb-List: Re: MK III - New Nose - Nice Job Did you keep the mold? You aren't the last person who will want a new nose. ----- Original Message ----- From: "west1m" Sent: Tuesday, March 17, 2015 1:19 PM Subject: Kolb-List: Re: MK III - New Nose - Nice Job > > Looks Great! any picts of the building process? > > -------- > West1m > Hastings, MN > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=439479#439479 > > > > > > > > > > ________________________________ Message 7 _____________________________________ Time: 11:14:47 AM PST US Subject: Re: Kolb-List: Re: MK III - New Nose From: Larry Cottrell I guess it just depends on how brave you are. Apparently we are the only ones who watched cartoons as a kid. At least in that time frame. It does look good, just a bit perkier than the factory. Larry On Tue, Mar 17, 2015 at 11:00 AM, Larlaeb wrote: > > You think maybe some eyes and a more 'beak' like color scheme might help? > :) > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=439477#439477 > > -- *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 8 _____________________________________ Time: 11:44:05 AM PST US Subject: Kolb-List: Re: MK III - New Nose - Nice Job From: "Larlaeb" Unfortunately most of my pictures of this process were lost when my phone was destroyed (another unrelated story). I didn't use a plug or a mold. Not to say it was the right way but this was done with three pieces of flat fiberglass sheet, a small piece of foam, two pieces of PVC (removed after use), some pop rivets (also removed), some fiberglass tape, resin, filler and paint. I do have a few pics that I will post when I can pull them together. Thanks, Allan Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439483#439483 ________________________________ Message 9 _____________________________________ Time: 11:46:24 AM PST US Subject: Kolb-List: Re: FireFly Page Is Back UP From: "fxflyr" Hello Jack Hart. Thank you for your FireFly page. I am the owner of FireFly 0058. It is without an engine right now as thieves took the Rotax 447 before I got it. I am now in process of getting a Hirth 2702 installed by Matt Dandridge at Rec Power. Your pages are just so interesting and filled with great ideas and skills well demonstrated. One day I would like to meet you. Tommy Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439484#439484 ________________________________ Message 10 ____________________________________ Time: 12:01:12 PM PST US From: "pcking" Subject: Re: Kolb-List: Re: MK III - New Nose - Nice Job That sounds like a quick build. The story would be worth telling. ----- Original Message ----- From: "Larlaeb" Sent: Tuesday, March 17, 2015 2:43 PM Subject: Kolb-List: Re: MK III - New Nose - Nice Job > > Unfortunately most of my pictures of this process were lost when my phone > was destroyed (another unrelated story). I didn't use a plug or a mold. > Not to say it was the right way but this was done with three pieces of > flat fiberglass sheet, a small piece of foam, two pieces of PVC (removed > after use), some pop rivets (also removed), some fiberglass tape, resin, > filler and paint. I do have a few pics that I will post when I can pull > them together. > > Thanks, > Allan > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=439483#439483 > > > ________________________________ Message 11 ____________________________________ Time: 12:10:27 PM PST US Subject: Kolb-List: Re: Flight Simulator Aircraft Configuration For Kolb From: "Larlaeb" I have one for a Firefly on Microsoft X. I don't remember where I got it but pretty sure it was a download from a search I did for Kolb on Google. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=439487#439487 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.