Kolb-List Digest Archive

Thu 06/04/15


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 08:21 AM - Need measurement on M3X with 912 (jody morgan)
     2. 12:46 PM - Re: Need measurement on M3X with 912 (Colin Hudson)
     3. 05:51 PM - Re: Removing bolt from elevator control mechanism (Mcabbage)
     4. 08:25 PM - Re: Removing bolt from elevator control mechanism (Richard Pike)
 
 
 


Message 1



  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 08:21:48 AM PST US
    Subject: Need measurement on M3X with 912
    From: jody morgan <jodymorgan@earthlink.net>
          
      Hey All,
      
      I'm building a M3X planning to mount a Suzuki 4 cyl engine on it.
      I need the distance from the center of the prop hub to the top of the main
      boom tube to see what I have to do to get the prop at the same height as
      the 912.
      
      Hope that makes sense.
      Thanks,
      Jody
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 12:46:09 PM PST US
    From: Colin Hudson <colin.scott.hudson@gmail.com>
    Subject: Re: Need measurement on M3X with 912
          
      Jody I have a factory built M3X with a Jabiru 2200 in it.  It's 38 1/4".
      
      Scott Hudson
      N424AL
      
      Sent from my iPhone
      
      > On Jun 4, 2015, at 10:21 AM, jody morgan <jodymorgan@earthlink.net> wrote:
      
      > 
      > Hey All,
      > 
      > I'm building a M3X planning to mount a Suzuki 4 cyl engine on it.
      > I need the distance from the center of the prop hub to the top of the main
       boom tube to see what I have to do to get the prop at the same height as th
      e 912.
      > 
      > Hope that makes sense.   
      > Thanks,
      > Jody
      > 
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
      D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
      > 
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 05:51:43 PM PST US
    Subject: Re: Removing bolt from elevator control mechanism
    From: "Mcabbage" <Mc@americanbuilding.com>
          
      
      I finally cut them off with a die grinder after talking with Bryan
      at Kolb. The tubing is just spacers so easily replaced.
      
      However the remaining bolt is frozen inside the elevators so bad 
      I can't twist out the bolts even with vice grips!  So I'm soaking in
      the Acetone mix tonight hopefully I don't have to remake the elevators.
      
      Thanks guys I appreciate the suggestions.
      Mike
      
      --------
      2007  Firestar 2 503  N203SD
      Moster 185 flattop PPG/Sky K2 Paraglider
      Trike Buggy Soaring Trike &amp; Northwing Stratus XP
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=443054#443054
      
      
      Attachments: 
      
      http://forums.matronics.com//files/20150604_191024_191.jpg
      
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 08:25:01 PM PST US
    Subject: Re: Removing bolt from elevator control mechanism
    From: "Richard Pike" <thegreybaron@charter.net>
          
      
      https://imageresizer.codeplex.com/
      
      http://windows.microsoft.com/en-us/windows-xp/help/digitalphotography/resize-digital-pictures
      
      http://microsoft-powertoys-image-resizer.en.softonic.com/
      
      Sigh...
      
      --------
      Richard Pike
      Kolb MKIII N420P (420ldPoops)
      Kingsport, TN 3TN0
      There are two kinds of people: those who say to God, 'Thy will be done,' and those
      to whom God says, 'All right, then, have it your way.'
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=443062#443062
      
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   kolb-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/Kolb-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/kolb-list
    

  • Browse Kolb-List Digests
    		•   http://www.matronics.com/digest/kolb-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --