---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Mon 06/08/15: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:06 AM - 447 prop (Herb) 2. 11:52 AM - Re: 447 prop (Richard Pike) 3. 01:38 PM - Re: Re: 447 prop (Herb) 4. 05:01 PM - Re: Need measurement on M3X with 912 (jody morgan) 5. 05:17 PM - Prop Hub Extension? (jody morgan) ________________________________ Message 1 _____________________________________ Time: 11:06:58 AM PST US From: Herb Subject: Kolb-List: 447 prop I received three props with my California purchase. Two blade 66 inch Ivo for 503 and 582. and two blade 60 inch Warp. And a three blade medium(503 or better ) pitch, 68 inch ivo minus the quick adjust.. I need a three blade,ul, 60 to 62 inch IVO for the 447 on my Firefly... Also have a three blade electrically adjustable IVO with medium blades...60 inch..for 503 or 582? I notice that some are using the Warp with a b box.. some with hundreds of hours... Thinking that I could use the 60 inch warp without the 2.5 inch extension.. What are the experiences out there...? anyone have a trade? privately of course...Maybe a two blade wooden prop? Herb ________________________________ Message 2 _____________________________________ Time: 11:52:06 AM PST US Subject: Kolb-List: Re: 447 prop From: "Richard Pike" 2 blade 66" Ivo is good for a 503 and also 532 running a B box with a 2.58:1 ratio. A 2 blade 68" is great for a 582 running a B box with 2.58:1. Those are the combinations I have tried and found good, the others I have no opinion. -------- Richard Pike Kolb MKIII N420P (420ldPoops) Kingsport, TN 3TN0 There are two kinds of people: those who say to God, 'Thy will be done,' and those to whom God says, 'All right, then, have it your way.' Read this topic online here: http://forums.matronics.com/viewtopic.php?p=443242#443242 ________________________________ Message 3 _____________________________________ Time: 01:38:50 PM PST US From: Herb Subject: Re: Kolb-List: Re: 447 prop Thanks Richard Chatted with a fellow at Warp drive...very helpful and friendly...so is IVO... and he said that the two blade 60 inch Warp is ok for the 447 ...with b box...Herb On 06/08/2015 01:51 PM, Richard Pike wrote: > > 2 blade 66" Ivo is good for a 503 and also 532 running a B box with a 2.58:1 ratio. A 2 blade 68" is great for a 582 running a B box with 2.58:1. Those are the combinations I have tried and found good, the others I have no opinion. > > -------- > Richard Pike > Kolb MKIII N420P (420ldPoops) > Kingsport, TN 3TN0 > There are two kinds of people: those who say to God, 'Thy will be done,' and those to whom God says, 'All right, then, have it your way.' > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=443242#443242 > > ________________________________ Message 4 _____________________________________ Time: 05:01:31 PM PST US Subject: Re: Kolb-List: Need measurement on M3X with 912 From: jody morgan Hey All, Big Question? Does the 912 need a prop hub extension when mounted to the M3C or M3X? Wanting to mount the Suzuki 1.3 with Raven Redrive on the M3X I'm building, but the Raven Redrive will not accept a prop hub extension. Trying to match the distance from the 912 to the prop without an extension to match the distance for the Suzuki, so if the 912 requires a prop hub extension when mounted to the M3X it would change my whole set up calculations or maybe eliminate the Suzuki with that Redrive. Tried to look it up in the archives but haven't got that figured out yet. If it does require a prop hub extension, how long of one does it need? Thanks in advance for any help. Jody On Thu, Jun 4, 2015 at 8:21 AM, jody morgan wrote: > Hey All, > > I'm building a M3X planning to mount a Suzuki 4 cyl engine on it. > I need the distance from the center of the prop hub to the top of the main > boom tube to see what I have to do to get the prop at the same height as > the 912. > > Hope that makes sense. > Thanks, > Jody > > * > > > * > > ________________________________ Message 5 _____________________________________ Time: 05:17:25 PM PST US Subject: Kolb-List: Prop Hub Extension? From: jody morgan > Hey All, > > Does the 912 need a prop hub extension when mounted to the M3C or M3X? > Wanting to mount the Suzuki 1.3 with Raven Redrive on the M3X I'm > building, but the Raven Redrive will not accept a prop hub extension. > > Trying to match the distance from the 912 to the prop without an extension > to match the distance for the Suzuki, so if the 912 requires a prop hub > extension when moounted to the M3X it would change my whole set up > calculations or maybe eliminate the Suzuki with that Redrive. > > Tried to look it up in the archives but haven't got that figured out yet. > > If it does require a prop hub extension, how long of one does it need? > > Thanks in advance for any help. > Jody > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.