---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Fri 04/22/16: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:36 PM - Once around, It's Spring! (west1m) 2. 03:47 PM - Re: Once around, It's Spring! (Larry Cottrell) 3. 04:04 PM - Re: Once around, It's Spring! (west1m) 4. 04:13 PM - Re: Re: Once around, It's Spring! (Larry Cottrell) 5. 06:08 PM - q (Russ Kinne) 6. 06:14 PM - Re: q (Russ Kinne) 7. 06:42 PM - 10 gal tank... (Herb) ________________________________ Message 1 _____________________________________ Time: 03:36:03 PM PST US Subject: Kolb-List: Once around, It's Spring! From: "west1m" Just a short video around the field to prove it's spring in Minnesota! It was a bit windy for me to adventure any further. https://vimeo.com/163883484 password KRNH447 -------- West1m Hastings, MN Read this topic online here: http://forums.matronics.com/viewtopic.php?p=455350#455350 ________________________________ Message 2 _____________________________________ Time: 03:47:58 PM PST US Subject: Re: Kolb-List: Once around, It's Spring! From: Larry Cottrell Thanks for the video. Send me a picture of where you have the camera mounted when you get a chance. You noticed of course that it camera settled down when you throttled back. It looked a bit like spring there. Yesterday here is SE Oregon it was 86 degrees yesterday, today the winds were 40 MPH. Larry On Fri, Apr 22, 2016 at 4:35 PM, west1m wrote: > > Just a short video around the field to prove it's spring in Minnesota! > It was a bit windy for me to adventure any further. > > https://vimeo.com/163883484 password KRNH447 > > -------- > West1m > Hastings, MN > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=455350#455350 > > -- *The older I get, the less tolerant I am of those who are intolerant of others.* *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 3 _____________________________________ Time: 04:04:31 PM PST US Subject: Kolb-List: Re: Once around, It's Spring! From: "west1m" I mounted it on the nose, attached on a plate above the "P" tube -------- West1m Hastings, MN Read this topic online here: http://forums.matronics.com/viewtopic.php?p=455352#455352 Attachments: http://forums.matronics.com//files/ffly2_124.jpg http://forums.matronics.com//files/ffly1_569.jpg ________________________________ Message 4 _____________________________________ Time: 04:13:32 PM PST US Subject: Re: Kolb-List: Re: Once around, It's Spring! From: Larry Cottrell Thanks for the pictures, that was fast. Is it "springy"? The more solid it is the better the video. Other wise you will have to figure what RPM gives you less jumpy video. I used a 1x1/8th flat stock about 5 inches long, twisted 180 so that I could use a hole drilled in the side to secure the cradle. Thanks again, Larry On Fri, Apr 22, 2016 at 5:04 PM, west1m wrote: > > I mounted it on the nose, attached on a plate above the "P" tube > > -------- > West1m > Hastings, MN > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=455352#455352 > > > Attachments: > > http://forums.matronics.com//files/ffly2_124.jpg > http://forums.matronics.com//files/ffly1_569.jpg > > -- *The older I get, the less tolerant I am of those who are intolerant of others.* *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 5 _____________________________________ Time: 06:08:15 PM PST US From: Russ Kinne Subject: Kolb-List: q It is with regret that I=99ve decided to sell my Kolb Xtra. built 2007 (but not by me), N740VP, Rotax 912UL, TT 113 hrs, BRS just repacked, Icom A6. just bench-checked. Insured for $30K but I think 22K is a more accurate value. Enclosed trainer available Plane is in Maine Russ K ________________________________ Message 6 _____________________________________ Time: 06:14:13 PM PST US Subject: Re: Kolb-List: q From: Russ Kinne > On Apr 22, 2016, at 9:07 PM, Russ Kinne wrote: > > It is with regret that Ive decided to sell my Kolb Xtra. built 2007 (but not by me), N740VP, > Rotax 912UL, TT 113 hrs, BRS just repacked, Icom A6. just bench-checked. > Insured for $30K but I think 22K is a more accurate value. Enclosed trainer available > Plane is in Maine > Russ K > > <_MG_5003 2.jpg> ________________________________ Message 7 _____________________________________ Time: 06:42:31 PM PST US Subject: Kolb-List: 10 gal tank... From: Herb anyone have a notion where a 10 gal poly tank can be bought? I will check with Bryan on Monday if need be..Herb ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.