---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Mon 03/06/17: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:16 AM - Re: ANYONE near Southern California so can look at a Mark III (B Young) 2. 07:19 AM - Re: ANYONE near Southern California so can look at a Mark III (B Young) 3. 07:38 AM - Video (B Young) 4. 07:55 AM - Re: ANYONE near Southern California so can look at a Mark III (Bill Berle) 5. 08:41 AM - Re: Video (Larry Cottrell) 6. 08:45 AM - Re: Video (B Young) 7. 09:21 AM - Re: Video (Rick Neilsen) 8. 09:32 AM - Re: Video (Larry Cottrell) 9. 01:17 PM - Re: Video (west1m) 10. 07:52 PM - Re: Video (Richard Pike) 11. 08:03 PM - Vodeo (B Young) ________________________________ Message 1 _____________________________________ Time: 07:16:16 AM PST US From: B Young Subject: Re: Kolb-List: ANYONE near Southern California so can look at a Mark III Video https://vimeo.com/user29057193/flying-the-bear-river ________________________________ Message 2 _____________________________________ Time: 07:19:43 AM PST US From: B Young Subject: Re: Kolb-List: ANYONE near Southern California so can look at a Mark III Sorry the previous email should have been off list. If you want to watch video the password is. beekeeper https://vimeo.com/user29057193/flying-the-bear-river Boyd ________________________________ Message 3 _____________________________________ Time: 07:38:40 AM PST US From: B Young Subject: Kolb-List: Video Ok someone contacted me and said no joy on the video..... It worked for me maybe because I was checked into the account...... Try this https://vimeo.com/119686841 Password is beekeeper On Mar 6, 2017 8:19 AM, "B Young" wrote: Sorry the previous email should have been off list. If you want to watch video the password is. beekeeper https://vimeo.com/ user29057193/flying-the-bear-river Boyd ________________________________ Message 4 _____________________________________ Time: 07:55:27 AM PST US From: Bill Berle Subject: Re: Kolb-List: ANYONE near Southern California so can look at a Mark III I am in Southerm CA and can go look at whatever Mark 3 is being discussed if it is helpful. Bill Berle 818-six34-9seven62 Bill Berle www.ezflaphandle.com - safety & performance upgrade for light aircraft www.grantstar.net - winning proposals for non-profit and for-profit entities -------------------------------------------- On Mon, 3/6/17, B Young wrote: Subject: Re: Kolb-List: ANYONE near Southern California so can look at a Mark III To: "Kolb List" Date: Monday, March 6, 2017, 7:19 AM Sorry the previous email should have been off list. If you want to watch video the password is. beekeeper https://vimeo.com/user29057193/flying-the-bear-river Boyd ________________________________ Message 5 _____________________________________ Time: 08:41:20 AM PST US From: Larry Cottrell Subject: Re: Kolb-List: Video I was able to view it ok. I assume from the small size of the picture that it was originally made with "Movie Maker", would that be right? I am not sure why they want to shrink the size of the video's, but that is why I quit using it. It looks nice and smooth, something that I could not obtain from a wing strut mounting. I recall telling Bill B that a mount on the wing strut would not work. It appears that I am going to have to qualify that to say that it won't work on a Firestar II. Oh well! Larry On Mon, Mar 6, 2017 at 8:38 AM, B Young wrote: > Ok someone contacted me and said no joy on the video..... It worked for > me maybe because I was checked into the account...... > > Try this > > https://vimeo.com/119686841 > > Password is beekeeper > > On Mar 6, 2017 8:19 AM, "B Young" wrote: > > Sorry the previous email should have been off list. If you want to watch > video the password is. beekeeper > https://vimeo.com/user29057193/flying-the-bear-river > > Boyd > > -- *The older I get, the less tolerant I am of those who are intolerant of others.* *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 6 _____________________________________ Time: 08:45:41 AM PST US From: B Young Subject: Re: Kolb-List: Video OK what editing software should I replace movie maker with? On Mar 6, 2017 9:43 AM, "Larry Cottrell" wrote: > I was able to view it ok. I assume from the small size of the picture that > it was originally made with "Movie Maker", would that be right? I am not > sure why they want to shrink the size of the video's, but that is why I > quit using it. > > It looks nice and smooth, something that I could not obtain from a wing > strut mounting. I recall telling Bill B that a mount on the wing strut > would not work. It appears that I am going to have to qualify that to say > that it won't work on a Firestar II. Oh well! > Larry > > On Mon, Mar 6, 2017 at 8:38 AM, B Young wrote: > >> Ok someone contacted me and said no joy on the video..... It worked >> for me maybe because I was checked into the account...... >> >> Try this >> >> https://vimeo.com/119686841 >> >> Password is beekeeper >> >> On Mar 6, 2017 8:19 AM, "B Young" wrote: >> >> Sorry the previous email should have been off list. If you want to >> watch video the password is. beekeeper >> https://vimeo.com/user29057193/flying-the-bear-river >> >> Boyd >> >> >> > > > -- > *The older I get, the less tolerant I am of those who are intolerant of > others.* > > *If you forward this email, or any part of it, please remove my email > address before sending.* > ________________________________ Message 7 _____________________________________ Time: 09:21:33 AM PST US From: Rick Neilsen Subject: Re: Kolb-List: Video Boyd The video is great. send us more. I use movie maker and it has always produced larger size picture. I'm not real proficient with movie maker and it seems like vimeo tells me there is a better resolution to use but I get the large picture and it looks great so I haven't fixed it. Seems like I just set the publishing settings as movie maker recommended for vimeo. I tried a bunch of different mounts and the wing strut mount (right at the jury strut attachment) works best for my MKIIIC. My camera has a real wide field of view so I get the leading edge of the wing. If I point it down more the video looks strange and has more of the rolling effect. Rick Neilsen Redrive VW Powered MKIIIC On Mon, Mar 6, 2017 at 10:38 AM, B Young wrote: > Ok someone contacted me and said no joy on the video..... It worked for > me maybe because I was checked into the account...... > > Try this > > https://vimeo.com/119686841 > > Password is beekeeper > > On Mar 6, 2017 8:19 AM, "B Young" wrote: > > Sorry the previous email should have been off list. If you want to watch > video the password is. beekeeper > https://vimeo.com/user29057193/flying-the-bear-river > > Boyd > > ________________________________ Message 8 _____________________________________ Time: 09:32:37 AM PST US From: Larry Cottrell Subject: Re: Kolb-List: Video http://www.cyberlink.com/stat/edms/ppc/video-editing-software/powerdirector/15/30-30-45P_72hr/us/index_adr_bot-t_cp_bun.jsp I am using version 12, which I do not see as available. I stayed with that as I do not need all the various bells and gimmicks that the later versions enable. There are free versions of several editors available. I cannot say what they are like however. You could just buy a new Virb Elite and get a movie editor with the camera. The virb , to my eye, seems to have the best clarity of all the camera's that I have tried. It comes with a remote or you can just set it to record when the plane is moving and not worry about it. Three hour battery comes with it. I think the camera is worth it even if I do not turn it into a movie for others to see, in that I can display it on my TV for the wife to see. Perhaps you can find out why Movie Maker only gives you a small 6x8 picture rather than a full screen. It used to be full screen, then changed. The quality of the finished project is not as good as it would be with another editing program however. Then again- it is free! Larry On Mon, Mar 6, 2017 at 9:45 AM, B Young wrote: > OK what editing software should I replace movie maker with? > On Mar 6, 2017 9:43 AM, "Larry Cottrell" wrote: > >> I was able to view it ok. I assume from the small size of the picture >> that it was originally made with "Movie Maker", would that be right? I am >> not sure why they want to shrink the size of the video's, but that is why I >> quit using it. >> >> It looks nice and smooth, something that I could not obtain from a wing >> strut mounting. I recall telling Bill B that a mount on the wing strut >> would not work. It appears that I am going to have to qualify that to say >> that it won't work on a Firestar II. Oh well! >> Larry >> >> On Mon, Mar 6, 2017 at 8:38 AM, B Young wrote: >> >>> Ok someone contacted me and said no joy on the video..... It worked >>> for me maybe because I was checked into the account...... >>> >>> Try this >>> >>> https://vimeo.com/119686841 >>> >>> Password is beekeeper >>> >>> On Mar 6, 2017 8:19 AM, "B Young" wrote: >>> >>> Sorry the previous email should have been off list. If you want to >>> watch video the password is. beekeeper >>> https://vimeo.com/user29057193/flying-the-bear-river >>> >>> Boyd >>> >>> >>> >> >> >> -- >> *The older I get, the less tolerant I am of those who are intolerant of >> others.* >> >> *If you forward this email, or any part of it, please remove my email >> address before sending.* >> > -- *The older I get, the less tolerant I am of those who are intolerant of others.* *If you forward this email, or any part of it, please remove my email address before sending.* ________________________________ Message 9 _____________________________________ Time: 01:17:24 PM PST US Subject: Kolb-List: Re: Video From: "west1m" Great movie, hope to see more. Thanks for posting it. -------- West1m Hastings, MN Read this topic online here: http://forums.matronics.com/viewtopic.php?p=466949#466949 ________________________________ Message 10 ____________________________________ Time: 07:52:52 PM PST US Subject: Kolb-List: Re: Video From: "Richard Pike" Nice, thank you. -------- Richard Pike Kolb MKIII N420P (420ldPoops) Kingsport, TN 3TN0 Forgiving is tough. Being forgiven is wonderful. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=466954#466954 ________________________________ Message 11 ____________________________________ Time: 08:03:25 PM PST US From: B Young Subject: Kolb-List: Vodeo Here is another. 2 to 3 years old. Password is beekeeper https://vimeo.com/98587855 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.