Kolb-List Digest Archive

Wed 06/27/18


Total Messages Posted: 7



Today's Message Index:
----------------------
 
     1. 06:24 AM - Re: FAA Inspection (Richard Pike)
     2. 09:00 AM - Re: FAA Inspection (mojavjoe)
     3. 01:46 PM - Re: FAA Inspection (japowell)
     4. 05:54 PM - Re: FAA Inspection (japowell)
     5. 06:15 PM - Re: FAA Inspection (George Alexander)
     6. 07:07 PM - Re: Re: FAA Inspection (George Helton)
     7. 07:28 PM - Image Resizer (Richard Pike)
 
 
 


Message 1



  • 					INDEX
    		•  Back to Main INDEX
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 06:24:05 AM PST US
    Subject: Re: FAA Inspection
    From: "Richard Pike" <thegreybaron@charter.net>
          
      
      Ichiban! Post us some pictures of the completed airplane.
      
      --------
      Richard Pike
      Kolb MKIII N420P (420ldPoops)
      Kingsport, TN 3TN0
      
      Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=481228#481228
      
      


    Message 2

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 09:00:51 AM PST US
    From: mojavjoe <mojavjoe@comcast.net>
    Subject: Re: FAA Inspection
          
      
      Jim
      
      I'm coming up on the time for my inspection. I've reserved my N number but have
      no idea what forms to order. Could you send my a list of what you submitted?
      
      Thanks
      Joe
      > On June 26, 2018 at 8:46 PM japowell <japnmjp@twc.com> wrote:
      > 
      > 
      > 
      > Sent all of my paper work in to the FAA in Columbus, Ohio last week
      >  expecting it to take a couple of months to get a reply.  Well, low and
      >  behold, 4 days later they call and setup an inspection for July 3.
      > 
      > I screwed up one of the forms but the inspector said he would correct it
      >  and bring a new one with him.  He also sent me the repairman's form for
      >  me to have notorized.  Been trying to get all of my papers in order so it
      >  looks organized.  Will let everyone know how it all turns out.
      > 
      > Thanks to this forum for all the help and encouragement.  Without you
      >  guys it would not have been possible.
      > 
      > --------
      > Jim P
      > WAR EAGLE
      > 
      > 
      > 
      > 
      > Read this topic online here:
      > 
      > http://forums.matronics.com/viewtopic.php?p=481225#481225
      > 
      > 
      > 
      > 
      > 
      > 
      > 
      > 
      >
      
      


    Message 3

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 01:46:29 PM PST US
    Subject: Re: FAA Inspection
    From: "japowell" <japnmjp@twc.com>
          
      
      Richard, I will need to down size the pic's.  How do I do that?
      
      --------
      Jim P
      WAR EAGLE
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=481232#481232
      
      


    Message 4

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 05:54:16 PM PST US
    Subject: Re: FAA Inspection
    From: "japowell" <japnmjp@twc.com>
          
      
      First of all, I want to thank Mr.Pike for resizing these photos so I can share
      with you all.  Thank you Richard.
      
      --------
      Jim P
      WAR EAGLE
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=481235#481235
      
      
      Attachments: 
      
      http://forums.matronics.com//files/20180626_134129_medium_195.jpg
      http://forums.matronics.com//files/20180626_134123_medium_411.jpg
      http://forums.matronics.com//files/20180626_133826_medium_121.jpg
      http://forums.matronics.com//files/100_3751_medium_280.jpeg
      
      


    Message 5

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 06:15:53 PM PST US
    Subject: Re: FAA Inspection
    From: "George Alexander" <gtalexander@att.net>
          
      
      
      japowell wrote:
      > First of all, I want to thank Mr.Pike for resizing these photos so I can share
      with you all.  Thank you Richard.
      
      Jim: Very nice looking Kolb FSII.  Noticed that the shoulder harness, in the 1st
      and 3rd pics is attached to the bar in front of the fuel tanks and in the 4th
      it is attached high.  Hope this last one is the final attach point.  I believe
      the other two is too low.  I've been told that the attach point should be
      above the shoulders.  Not sure what the authorities would say.....
      As Beauford would say... "These words are worth what you paid for them."
      
      --------
      George Alexander
      FS II R503  
      E-LSA N709FS
      http://www.oh2fly.net
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=481237#481237
      
      


    Message 6

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 07:07:20 PM PST US
    From: George Helton <gdhelton@gmail.com>
    Subject: Re: FAA Inspection
          
      
      Nice looking rig! Fly safe and good luck! Blue skies.
      George H.
      Firestar, FS100,Hirth 2702
      14GDH
      Mesick, Michigan 
      gdhelton@gmail.com
      
      Sent from my iPhone
      
      > On Jun 27, 2018, at 8:54 PM, japowell <japnmjp@twc.com> wrote:
      > 
      > 
      > First of all, I want to thank Mr.Pike for resizing these photos so I can share
      with you all.  Thank you Richard.
      > 
      > --------
      > Jim P
      > WAR EAGLE
      > 
      > 
      > 
      > 
      > Read this topic online here:
      > 
      > http://forums.matronics.com/viewtopic.php?p=481235#481235
      > 
      > 
      > 
      > 
      > Attachments: 
      > 
      > http://forums.matronics.com//files/20180626_134129_medium_195.jpg
      > http://forums.matronics.com//files/20180626_134123_medium_411.jpg
      > http://forums.matronics.com//files/20180626_133826_medium_121.jpg
      > http://forums.matronics.com//files/100_3751_medium_280.jpeg
      > 
      > 
      > 
      > 
      > 
      > 
      
      


    Message 7

    

  • 					INDEX
    		•  Back to Main INDEX
    

  • 				PREVIOUS
    		•  Skip to PREVIOUS Message
    

  • 					NEXT
    		•  Skip to NEXT Message
    

  • 	LIST
    		•  Reply to LIST Regarding this Message
    

  • 		SENDER
    		•  Reply to SENDER Regarding this Message
    

    
      
      

    Time: 07:28:24 PM PST US
    Subject: Image Resizer
    From: "Richard Pike" <thegreybaron@charter.net>
          
      
      
      japowell wrote:
      > Richard, I will need to down size the pic's.  How do I do that?
      
      
      Several people have wondered recently how to resize pictures for the Kolb List.
      This little program is the easiest I have seen:
      https://www.bricelam.net/ImageResizer/
      After you install it, it sort of hides and waits until you want to use it. To use
      it, right click the picture you want to resize, and it pops open an option
      box with several sizes you can resize to. For instance, the pictures Jim Powell
      posted in the FAA Inspection thread were resized to Medium, and all of them
      are less than a meg in size.
      
      --------
      Richard Pike
      Kolb MKIII N420P (420ldPoops)
      Kingsport, TN 3TN0
      
      Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=481240#481240
      
      

    

    


    

    

    

    

    Other Matronics Email List Services
    

    

    

    


  • Post A New Message
    		•   kolb-list@matronics.com
    

  • UN/SUBSCRIBE
    		•   http://www.matronics.com/subscription
    

  • List FAQ
    		•   http://www.matronics.com/FAQ/Kolb-List.htm
    

  • Web Forum Interface To Lists
    		•   http://forums.matronics.com
    

  • Matronics List Wiki
    		•   http://wiki.matronics.com
    

  • 7-Day List Browse
    		•   http://www.matronics.com/browse/kolb-list
    

  • Browse Kolb-List Digests
    		•   http://www.matronics.com/digest/kolb-list
    

  • Browse Other Lists
    		•   http://www.matronics.com/browse
    

  • Live Online Chat!
    		•   http://www.matronics.com/chat
    

  • Archive Downloading
    		•   http://www.matronics.com/archives
    

  • Photo Share
    		•   http://www.matronics.com/photoshare
    

  • Other Email Lists
    		•   http://www.matronics.com/emaillists
    

  • Contributions
    		•   http://www.matronics.com/contribution
    



    

    


    

    


    
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.


    

    

-- Please support this service by making your Contribution today! --