---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Sun 11/25/18: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:24 PM - Coming Soon - The List of Contributors - Please Make A Contribution Today! (Matt Dralle) 1. 05:34 AM - Re: My Firestar 2 Build (loctupdave) 2. 08:02 AM - Re: Firefly / Firestar windshield (west1m) 3. 01:51 PM - Re: Re: Firefly / Firestar windshield (George Helton) 4. 04:12 PM - Fuel trailer for sale (Richard Pike) 5. 06:04 PM - Re: ADS-B out (Richard Girard) 6. 07:37 PM - Re: ADS-B out (Charlie England) ________________________________ Message 0 _____________________________________ Time: 12:24:52 PM PST US From: Matt Dralle Subject: Kolb-List: Coming Soon - The List of Contributors - Please Make A Contribution Today! Each year at the end of the List Fund Raiser, I post a message acknowledging everyone that so generously made a Contribution to support the Lists. Its my way of publicly thanking everyone that took a minute to show their appreciation for the Lists. Please take a moment and assure that your name is on that List of Contributors (LOC)! As a number of members have pointed out over the years, the List seems at least as valuable a building / entertainment tool as your typical magazine subscription! Assure that your name is on this year's LOC! Show others that you appreciate the Lists. Making a Contribution to support the Lists is fast and easy using your Credit card or Paypal on the Secure Web Site: http://www.matronics.com/contribution or by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 I would like to thank everyone that has so generously made a Contribution thus far in this year's List Fund Raiser! Remember that its YOUR support that keeps these Lists going and improving! Don't forget to include a little comment about how the Lists have helped you! Best regards, Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 05:34:54 AM PST US Subject: Kolb-List: Re: My Firestar 2 Build From: "loctupdave" I have the engine apart. The cylinder walls look great and the pistons have carbon deposits. I will sand blast the complete engine exterior, I will do the pistons and heads also. The crank looks and feels great, no clicking or other strange noises from the bearings and they seem to be tight. The crank and the lower case is in solvent, so they will not be seen in the pic. (http://s275.photobucket.com/user/dngspot/media/engine%20parts_zpsyoxl4dqo.jpg.html) We had a warm day, so the fuselage frame was painted. (http://s275.photobucket.com/user/dngspot/media/Painted_zps64dh069o.jpg.html) Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485623#485623 ________________________________ Message 2 _____________________________________ Time: 08:02:56 AM PST US Subject: Kolb-List: Re: Firefly / Firestar windshield From: "west1m" I am installing the "Kolb Full Canopy" right now and I plan on using your latch mechanism . In the latch picture of the rear, How is the back half of the latch and aluminum piece attached to the Cro-Molly tube ? Do those screws thread into the tube? -------- West1m Hastings, MN Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485627#485627 Attachments: http://forums.matronics.com//files/latch_307.jpg ________________________________ Message 3 _____________________________________ Time: 01:51:48 PM PST US From: George Helton Subject: Re: Kolb-List: Re: Firefly / Firestar windshield No, I custom cut the screws and install them with a drop of blue locktite. T he small piece of aluminum channel is attached with two 1/8X1/4=9Dpull rivets. See pictures attached. Note that latch has been bent 90 degrees. Sent from my iPhone > On Nov 25, 2018, at 11:02 AM, west1m wrote: > > > I am installing the "Kolb Full Canopy" right now and I plan on using your l atch mechanism . In the latch picture of the rear, How is the back half of t he latch and aluminum piece attached to the Cro-Molly tube ? Do those screws thread into the tube? > > -------- > West1m > Hastings, MN > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=485627#485627 > > > > > Attachments: > > http://forums.matronics.com//files/latch_307.jpg > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= ========================== ========= ========================== ========= > > > ________________________________ Message 4 _____________________________________ Time: 04:12:34 PM PST US Subject: Kolb-List: Fuel trailer for sale From: "Richard Pike" Holds 50 gallons, 12V electric pump, new filter. Battery is old. Asking $450, offering it to the list first before it goes on Trade-A-Plane. The little maneuvering dolly is not part of the deal, but it could be included for a bit extra. PM me. DO NOT ARCHIVE. -------- Richard Pike Kolb MKIII N420P (420ldPoops) Kolb Firefly Part 103 legal (Redoing the Firefly windshield) Kingsport, TN 3TN0 Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=485722#485722 Attachments: http://forums.matronics.com//files/p1070044_medium_160.jpeg http://forums.matronics.com//files/p1070046_medium_465.jpeg ________________________________ Message 5 _____________________________________ Time: 06:04:29 PM PST US From: Richard Girard Subject: Re: Kolb-List: ADS-B out Nick, Have you looked at Dynon's new portable ADSB? in their Avweb announcement the price right now is $395. http://dynonavionics.com/drx-portable-adsb.php Rick On Thu, Nov 22, 2018 at 6:28 PM John Hauck wrote: > Thanks, Arty. > > > This FAA Pub spells it out pretty well, well enough for me to grasp and > understand. > > > https://www.faa.gov/nextgen/equipadsb/research/ > > > I've been able to fly all over the US, Canada, and Alaska, without having > to enter airspace where ADS-B would be required. Don't think I'll have a > requirement for it in the future. > > > john h > > mkIII > > Titus, Alabama > > > *From:* owner-kolb-list-server@matronics.com [mailto: > owner-kolb-list-server@matronics.com] *On Behalf Of *TheWanderingWench > *Sent:* Thursday, November 22, 2018 12:43 PM > *To:* kolb-list@matronics.com > *Subject:* Re: Kolb-List: ADS-B out > > > John - > > > If you never (or very seldom) fly into ADS-B-designated airspace, then > there is no requirement to equip. A number of my friends and I are not > going to install, because we don't fly in/through that airspace. AND > because you can request an authorized deviation from ATC if you are not > equipped. Check out Federal Regulation 14 CFR =C2=A7 91.225 > > and 14 CFR =C2=A7 91.227 > > for specific info. > > > Have a great Thanksgiving. > > > Arty > > Sandy, Oregon > > > "I refuse to tip toe through life just to arrive safely at death." > > > On Thursday, November 22, 2018, 10:28:08 AM PST, John Hauck < > jhauck@elmore.rr.com> wrote: > > > > > I too am out in the country, definitely not desert. ;-) > > > Also sorry to say I have not read the first requirement for ADS-B, but > have seen it mentioned and advertised many times. Am I missing a > requirement that I should have installed on my MKIII? > > > BTW: Happy Thanksgiving to all my Kolb friends. Thanks for being there > for the past 34 years on this wonderful Kolb flight. > > > john h > > hauck's holler, Titus, Alabama > > > -----Original Message----- > > From: owner-kolb-list-server@matronics.com [mailto: > owner-kolb-list-server@matronics.com] On Behalf Of Nick Cassara > > Sent: Thursday, November 22, 2018 11:54 AM > > To: kolb-list@matronics.com > > Subject: Kolb-List: ADS-B out > > > > > Hello Kolbers, > > > I am wondering if anyone has tackled ADS-B Out installation on their Kolb .. > I am not finding any inexpensive way to meet this requirement. UAIONIX ha s > a Wing Tip, or Tail Light Strobe ADS-B Out unit for around fifteen hundre d > bucks. Since I live on the edge of some very busy airspace, I will be > following this requirement and doing an installation on my Kolbra. > > If I lived out in the desert somewhere; might not be so important .. > > > Nick Cassara > > Palmer, Alaska > > > ?Kolb-List > > > httpbsp; ============== ==== > > http://www.matronics.com/Navi - MATRONICS WEB FORUMS - > http://wiki.m &nbsnbsp; --> > http://www.matronics.com/contribution > > ================ > > -- =9CBlessed are the cracked, for they shall let in the light.=9D Groucho Marx ________________________________ Message 6 _____________________________________ Time: 07:37:47 PM PST US Subject: Re: Kolb-List: ADS-B out From: Charlie England Or, for a little more than half that, https://www.amazon.com/Stratux-Receiver-Aviation-Weather-Traffic/dp/B071HMQY19 and you get an included AHARS for those inadvertent excursions into IMC in your Kolb. ;-) Charlie On 11/25/2018 8:03 PM, Richard Girard wrote: > Nick, Have you looked at Dynon's new portable ADSB? in their Avweb > announcement the price right now is $395. > > http://dynonavionics.com/drx-portable-adsb.php > > Rick > > On Thu, Nov 22, 2018 at 6:28 PM John Hauck > wrote: > > Thanks, Arty. > > This FAA Pub spells it out pretty well, well enough for me to > grasp and understand. > > https://www.faa.gov/nextgen/equipadsb/research/ > > I've been able to fly all over the US, Canada, and Alaska, without > having to enter airspace where ADS-B would be required. Don't > think I'll have a requirement for it in the future. > > john h > > mkIII > > Titus, Alabama > > *From:*owner-kolb-list-server@matronics.com > > [mailto:owner-kolb-list-server@matronics.com > ] *On Behalf Of > *TheWanderingWench > *Sent:* Thursday, November 22, 2018 12:43 PM > *To:* kolb-list@matronics.com > *Subject:* Re: Kolb-List: ADS-B out > > John - > > If you never (or very seldom) fly into ADS-B-designated airspace, > then there is no requirement to equip. A number of my friends and > I are not going to install, because we don't fly in/through that > airspace. AND because you can request an authorized deviation from > ATC if you are not equipped. Check out Federal Regulation 14 CFR > 91.225 > > and 14 CFR 91.227 > > for specific info. > > Have a great Thanksgiving. > > Arty > > Sandy, Oregon > > "I refuse to tip toe through life just to arrive safely at death." > > On Thursday, November 22, 2018, 10:28:08 AM PST, John Hauck > > wrote: > > > > > I too am out in the country, definitely not desert. ;-) > > Also sorry to say I have not read the first requirement for ADS-B, > but have seen it mentioned and advertised many times. Am I > missing a requirement that I should have installed on my MKIII? > > BTW: Happy Thanksgiving to all my Kolb friends. Thanks for being > there for the past 34 years on this wonderful Kolb flight. > > john h > > hauck's holler, Titus, Alabama > > -----Original Message----- > > From: owner-kolb-list-server@matronics.com > > [mailto:owner-kolb-list-server@matronics.com > ] On Behalf Of Nick > Cassara > > Sent: Thursday, November 22, 2018 11:54 AM > > To: kolb-list@matronics.com > > Subject: Kolb-List: ADS-B out > > > > > Hello Kolbers, > > I am wondering if anyone has tackled ADS-B Out installation on > their Kolb. I am not finding any inexpensive way to meet this > requirement. UAIONIX has a Wing Tip, or Tail Light Strobe ADS-B > Out unit for around fifteen hundred bucks. Since I live on the > edge of some very busy airspace, I will be following this > requirement and doing an installation on my Kolbra. > > If I lived out in the desert somewhere; might not be so important. > > Nick Cassara > > Palmer, Alaska > > ?Kolb-List > > > httpbsp; ================== > > http://www.matronics.com/Navi - MATRONICS WEB FORUMS - > http://wiki.m &nbsnbsp; --> > http://www.matronics.com/contribution > > ================ > > > -- > > > Blessed are the cracked, for they shall let in the light. Groucho > Marx > > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.