Today's Message Index:
----------------------
1. 12:57 AM - Re: Elevator and joystick throwElevator and joystick throw (Steve Gates)
2. 10:25 AM - Re: Kolb-List Digest: 4 Msgs - 06/29/19 (B Young)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Elevator and joystick throwElevator and joystick throw |
Hi all,
Some useful and interesting suggestions - I'll take them on board.
Many thanks
Steve
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Kolb-List Digest: 4 Msgs - 06/29/19 |
The joystick has a cable pivot point separation of 3" and the elevator
control
horn a cable pivot separation of 4". So we are thinking of increasing the
joystick
pivot separation to around 4"
Just had another thought.
If you give the eleveator more throw, it may work like a spoiler, stall,
and make for even less authority than you have now.
Make sure the elevator horn is attached solid with no flex or movement.
The plans should have listed the maximum movement up and down of the
trailing edge of the elevator.
Boyd Young
Mkiii
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|