Today's Message Index:
----------------------
1. 07:57 AM - Re: Kolb-List Digest: 1 Msgs - 08/15/19 (Mike)
2. 10:14 AM - Re: Kolb-List Digest: 1 Msgs - 08/15/19 (13brv3)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Kolb-List Digest: 1 Msgs - 08/15/19 |
Hello Rusty -
I have a Kolb Mark III Twinstar Classic with a Rotax 912.
The aluminum angle is 1"x3" and is 1/4 thick.
There is also a sheetmetal plate underneath the engine that mounts all the
way across to each aluminum angle via the motor mount bolts.
The sheetmetal is 1/16" thick.
I hope this helps!
Mike
On Thu, Aug 15, 2019 at 11:40 PM Kolb-List Digest Server <
kolb-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Kolb-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Kolb-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 19-08-15&Archive=Kolb
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 19-08-15&Archive=Kolb
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Kolb-List Digest Archive
> ---
> Total Messages Posted Thu 08/15/19: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 05:53 PM - 912 mount angle thickness? (13brv3)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 05:53:54 PM PST US
> Subject: Kolb-List: 912 mount angle thickness?
> From: "13brv3" <13brv3@gmail.com>
>
>
> Does anyone know the thickness of the aluminum angle used for 912 mount
> adapters?
> I need to order some angle to make my mounts. I'm guessing 3/8" thick
> maybe?
>
>
> Thanks,
> Rusty
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=490894#490894
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Kolb-List Digest: 1 Msgs - 08/15/19 |
armstromike(at)gmail.com wrote:
> Hello Rusty -I have a Kolb Mark III Twinstar Classic with a Rotax 912.
> The aluminum angle is 1"x3" and is 1/4 thick.
> There is also a sheetmetal plate underneath the engine that mounts all the way
across to each aluminum angle via the motor mount bolts.
> The sheetmetal is 1/16" thick.
>
>
> I hope this helps!
> Mike
>
>
Perfect Mike. Thanks,
Rusty
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=490904#490904
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|