---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Thu 11/28/19: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 07:16 AM - What Are You Thankful For...? (Matt Dralle) 1. 12:17 PM - Re: Re: 912 ignition module (Richard Girard) 2. 12:31 PM - Re: Re: stock jets for 503 Rotax (Richard Girard) 3. 07:15 PM - Firefly or Firestar wing weight? (13brv3) 4. 07:52 PM - Re: Firefly or Firestar wing weight? (Charlie England) ________________________________ Message 0 _____________________________________ Time: 07:16:40 AM PST US From: Matt Dralle Subject: Kolb-List: What Are You Thankful For...? Dear Listers, Here in the United States, Thursday is our National day of Thanksgiving. Many of us will be traveling to be with our families and friends to share in generous feasts of plenty and giving thanks for many blessings that have been bestowed upon us. Many Listers have expressed over the last couple of weeks how thankful they are for the Email Lists and Forums here on the Matronics servers and for all of the assistance and comradery they have experienced being a part of the Lists. One of my favorite kind of comments is when write to me and says something like, "Its the first thing I do in the morning while I'm having my morning coffee!". That's a wonderful tribute to the purpose and function of these Lists. Its always great to hear I'm not the only one that jumps out of bed each morning to check my List email!! Won't you take a minute today and show your appreciation for these Lists and for their continued operation and upgrade? The List Contribution Site is: http://www.matronics.com/contribution Or, by dropping a personal check in the mail to: Matt Dralle / Matronics 581 Jeannie Way Livermore CA 94550 Thank you in advance for your kind consideration, Matt Dralle Matronics Email List Administrator ________________________________ Message 1 _____________________________________ Time: 12:17:29 PM PST US From: Richard Girard Subject: Re: Kolb-List: Re: 912 ignition module Yikes! When I replaced the modules on a 912ULS they were $900 for the pair but that was because the originals were defective from the factory. Rick On Tue, Nov 26, 2019 at 8:07 PM 13brv3 <13brv3@gmail.com> wrote: > > We have ignition. I guess $1800 was enough to keep the Rotax gods happy > for now... I wish my brakes worked better, but it's not enough of a > problem to keep me from flying. > > Rusty (waiting for time off and weather to coexist) > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=493504#493504 > > =========== =========== =========== =========== =========== =========== > > -- =9CBlessed are the cracked, for they shall let in the light.=9D Groucho Marx ________________________________ Message 2 _____________________________________ Time: 12:31:19 PM PST US From: Richard Girard Subject: Re: Kolb-List: Re: stock jets for 503 Rotax Wouldn't you know it. The Bing manual doesn't show either of those carb numbers. It does have the last jetting offered by Rotax. For the 503DC: 158 Main Jet, a 45 idle jet, 2.70 Needle jet, an 11K2 needle, the clip should be in the middle groove on the needle and the idle screw adjustment should be .5 (1/2) turn in after contact with the slide. I'm assuming you don't have the intake silencer. If you do then the Main jet goes down to a 148, the needle jet is a 2.68 and the idle screw is turned in one full turn after contact. The idle jet and the jet needle stay the same. Rick On Thu, Nov 28, 2019 at 1:00 AM chic wrote: > > Hi Rick, thanks for the info. I found the carb #'s, one looks like > 54/36/2002 and the other a little hard to read but I think it is > 54/36/1546? Would Rotax put 2 different carb #'s on an engine from the > factory?? Maybe one of mine has been changed out. Could you look up those > #s and see what the jets originally were? Thanks, Chic > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=493512#493512 > > =========== =========== =========== =========== =========== =========== > > -- =9CBlessed are the cracked, for they shall let in the light.=9D Groucho Marx ________________________________ Message 3 _____________________________________ Time: 07:15:00 PM PST US Subject: Kolb-List: Firefly or Firestar wing weight? From: "13brv3" <13brv3@gmail.com> Greetings, Has anyone weighed a complete, painted wing for a FireStar or FireFly? Just curious what it weighs for a possible future project. Thanks, Rusty Read this topic online here: http://forums.matronics.com/viewtopic.php?p=493596#493596 ________________________________ Message 4 _____________________________________ Time: 07:52:34 PM PST US Subject: Re: Kolb-List: Firefly or Firestar wing weight? From: Charlie England On 11/28/2019 9:14 PM, 13brv3 wrote: > > Greetings, > > Has anyone weighed a complete, painted wing for a FireStar or FireFly? Just curious what it weighs for a possible future project. > > Thanks, > Rusty > Would original Twinstar wing weight help at all? ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.