---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Fri 03/13/20: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:38 AM - Re: Re: Mark III Taxi Crosswind Limit (Rick Neilsen) 2. 10:52 AM - Twinstar Mark 2, Left side throttle () ________________________________ Message 1 _____________________________________ Time: 07:38:03 AM PST US From: Rick Neilsen Subject: Re: Kolb-List: Re: Mark III Taxi Crosswind Limit Paul I rigged my tail wheel springs so that they were snug so that I had good steering control but not compressing the springs any. There is enough spring travel in the compression springs to absorb any shock but have limited travel enough so that in a heavy cross wind I can compress the springs to the limit and hold the tail wheel where I want to go against a cross wind. My stock tail tail wheel has never unlocked before full travel so I haven't modified my tail wheel. In fact when I first put the compression springs on I couldn't get the tail wheel to unlock. I had to then modify the tail wheel control arm. I drilled the control arm with new holes inboard of stock holes so that I could get the tail wheel to full lock where it would unlock for full swivel. I hope this is clear. As always worth what you paid for it. Rick Neilsen 1st Redrive VW powered MKIIIC On Thu, Mar 12, 2020 at 12:14 AM Larry Cottrell wrote: > If you have a "break away tail wheel" from Kolb you will notice when you > take it apart that there is a ball that releases the tail wheel to free > rotate. Since the housing is of alum, I used a square router tool to gouge > out more of the housing so that it would take almost a full deflection of > the rudder before it broke away. > > My first experience with the tail wheel breaking too soon was on a cross > country trip coming back from a Alvord Desert fly in. I landed at a remote > Oregon town and decided to land on the main strip. I had no problem with > the direct crosswind, but as soon as my speed got below 20 MPH the tail > weather vaned and sent me out into the Sage brush. Since the engine is > mounted high I had no problem other than a rough taxi to get out of the > ditch. I flew off the taxi way when I left. > > Not sure how Rick rigged his springs. > > Larry > > On Wed, Mar 11, 2020 at 9:36 PM prhutson wrote: > >> >> Thanks for your comments and suggestions. I'll need a tail wheel >> endorsement, too. >> So, where does one find the details about how to rig the compression >> springs for the tailwheel, or the hogging out tailwheel, or sissy bars on >> the wingtips? >> Paul >> >> -------- >> Paul Hutson >> Middleton, WI >> >> >> >> >> Read this topic online here: >> >> http://forums.matronics.com/viewtopic.php?p=495245#495245 >> >> >> >> >> >> >> ========== >> ========== >> -List" rel="noreferrer" target="_blank"> >> http://www.matronics.com/Navigator?Kolb-List >> ========== >> FORUMS - >> eferrer" target="_blank">http://forums.matronics.com >> ========== >> WIKI - >> errer" target="_blank">http://wiki.matronics.com >> ========== >> b Site - >> -Matt Dralle, List Admin. >> rel="noreferrer" target="_blank">http://www.matronics.com/contribution >> ========== >> >> >> >> > > -- > *The older I get, the less tolerant I am of those who are intolerant of > others.* > > *If you forward this email, or any part of it, please remove my email > address before sending.* > ________________________________ Message 2 _____________________________________ Time: 10:52:56 AM PST US From: Subject: Kolb-List: Twinstar Mark 2, Left side throttle Can a left side throttle be added to a Mark 2, there does not seem to be enough room with the enclosed cockpit? Dan Old Ultrastar driver. ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.