---------------------------------------------------------- Kolb-List Digest Archive --- Total Messages Posted Mon 05/03/21: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:26 PM - Re: Photo of rib (jaydub) 2. 08:14 PM - buying SS rivets from Spruce (Jay Dub) ________________________________ Message 1 _____________________________________ Time: 01:26:31 PM PST US Subject: Kolb-List: Re: Photo of rib From: "jaydub" I fixed these this weekend. I drilled out all the rivets where the false ribs (both upper and lower) that stuck out. As you can see in the photo above, many of the ribs were bent up where the rivet was. After removing the existing rivets I took some padded pliers and bent that tip down. If the rib still stuck out too far I took material off but leaving plenty of edge distance then put a new rivet in. I got them all fixed and using a string across all the false ribs they were still the same profile they should be, ie none were sticking up too far nor below the others. It worked well. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=501674#501674 ________________________________ Message 2 _____________________________________ Time: 08:14:39 PM PST US From: Jay Dub Subject: Kolb-List: buying SS rivets from Spruce I worked on my wings this past weekend and I'm almost out of the 1/8 diax 1/4 grip SS pull rivets. I'm looking at Spruce and I think the ones I need are their CCP-44 found herehttps://www.aircraftspruce.com/catalog/pnpages/CCP-44.php Is this what comes in the kit for the 1/8x1/4 SS pull rivets? I'm guessing this is correct but I wanted to check. Thanks, Jay ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message kolb-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Kolb-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/kolb-list Browse Digests http://www.matronics.com/digest/kolb-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.