---------------------------------------------------------- KR-List Digest Archive --- Total Messages Posted Thu 05/22/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:31 AM - Re: Re: those air scoops you guys have, where did you get them. (Jeff York) ________________________________ Message 1 _____________________________________ Time: 05:31:48 AM PST US From: "Jeff York" Subject: Re: KR-List: Re: those air scoops you guys have, where did you get them. --> KR-List message posted by: "Jeff York" Got my scoop yesterday. Took over 2 weeks for vans to get it to me. Let me see if I can explain this but, When I cut out my old scoop do you think I should attach the new scoop from the inside of the cowling or do you think I should mount it to the bottom or outside the cowling. Also, on the cotton flox... Do you think I should use aeropoxy to mix it with. It's been years since I last did this (and on a different plane) and all my stuff is dried out and no good and I had problems with some of the stuff I used (cracking not bonding well ect.) and wonder what the latest greatest is and how to best mix. Still mix to make a peanutbuttter consistantcy? >From: chris gardiner >Reply-To: kr-list@matronics.com >To: kr-list@matronics.com >Subject: Re: KR-List: Re: those air scoops you guys have, where did you get >them. >Date: Tue, 06 May 2003 20:46:20 -0400 > >--> KR-List message posted by: chris gardiner > >Actually you are right on !. I purchased mine from the Van's RV web site . > >It was for the RV 4 and I believe it was $60 US ( in 2000). Just cleco >in place , flox it on and fill it out with Super Fill . > >Go to Van's web address and you can order it on line . >I don't have the site address handy biut I'm sure you can find it or a >KR Net head will respond . > >Cheers > >Chris Gardiner >C-GKRZ > >Jeff York wrote: > > >--> KR-List message posted by: "Jeff York" > > > >I see a lot of KR's with carb air intake scoops that look very much like >the > >ones on RV's. > > > >Wher are you guys getting them at? If you have a place that they can be > >ordered I would like to change mine. > > > >If you have a source and part number please let me know. > > > > > >>From: "Jim Sellars" > >>Reply-To: kr-list@matronics.com > >>To: > >>Subject: KR-List: Lost Date: Mon, 5 May 2003 14:12:45 -0300 > >> > >>--> KR-List message posted by: "Jim Sellars" > >> > >>Fellows: > >> > >> It seems that I have lost my connection with the list. Enjoy >reading > >>the email messages even when they are not well prepared or well thought > >>through. Heh somedays you just need to share your thoughts. But >lately, I > >>haven't received any messages at all. Hope the group is still >functioning. > >> Please let me know. > >>Best regards, > >>Jim Sellars > >>CG-ROK > >>KR-2 Saturn powered > >>reconstruction after forced landing, fuel contamination. > >> > >> > > > > > >