Today's Message Index:
----------------------
1. 10:07 PM - Re: Jack points (KBurton01@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> KR-List message posted by: KBurton01@aol.com
Try this it works for me the drawing is rough but I don't have any real
design plans. It is basically a rig that mounts to the front and rear spar mounts
and has an aluminum spacer to avoid compressing the spar attach fittings
together. and a Jack pad which is pinned to a bottle jack, (a floor jack will work
just as well. The secret is to used two 95 pound bags of concrete which you mix
up to form two weights, I guess a bucket of lead will work too. But you have
to tie them to the tail wheel spring assemble when you begin jacking.
Otherwise you will fall over again.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|