----------------------------------------------------------
                           KR-List Digest Archive
                                      ---
                     Total Messages Posted Wed 02/25/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:07 PM - Re: Jack points  (KBurton01@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:07:40 PM PST US
From: KBurton01@aol.com
Subject: Re: KR-List: Jack points

--> KR-List message posted by: KBurton01@aol.com

Try this it works for me the drawing is rough but I don't have any real 
design plans. It is basically a rig that mounts to the front and rear spar mounts

and has an aluminum spacer to avoid compressing the spar attach fittings 
together. and a Jack pad which is pinned to a bottle jack, (a floor jack will work

just as well. The secret is to used two 95 pound bags of concrete which you mix

up to form two weights, I guess a bucket of lead will work too. But you have 
to tie them to the tail wheel spring assemble when you begin jacking. 
Otherwise you will fall over again.