Today's Message Index:
----------------------
1. 04:11 AM - Re: firewall grommets. (LarryRobertHelming)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: firewall grommets. |
--> KR-List message posted by: "LarryRobertHelming" <lhelming@sigecom.net>
----- Original Message -----
From: <haroldwoods@rogers.com>
Subject: KR-List: firewall grommets.
> --> KR-List message posted by: <haroldwoods@rogers.com>
>
> Passing wire and cables through the fire wall can be accomplished by using
> the appropriate sized electrical nipple.
> Let us say that you have to put a marine push/pull cable of 3/8 " diameter
> through the fire wall. Get a 2" or 3" nipple through which the cable fits
> snugly. Use a hacksaw to cut out the upper half of one end for about 3/4"
> from let us say the right hand end. Use a nut on both sides of the
firewall
> to retain the nipple or weld a circular plate onto the nipple and by means
> of 3 screw mount it through a hole in the firewall.Push the cable (or
wire)
> through and anchor it to the nipple with a 1/4" stainless steel adjustable
> clamp which goes over the top of the cable and under the buttom of the
uncut
> portion of the nipple. The fixture can be completely sealed with high
> temperature silicone if desired. You have only to choose the size of the
> nipple to suit your cable/wire situation. Electrical nipples are much
> lighter than iron plumbing nipples.
> Harold Woods
> Orillia,ON.Canada.
> haroldwoods@rogers.com
> ((((((((((())))))))))))))
What temps can electrical nipples handle? Have you got a part number and
source for buying electrical nipples?
Larry in Indiana
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|