---------------------------------------------------------- KR-List Digest Archive --- Total Messages Posted Tue 07/27/04: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:30 AM - Re: KR-List Digest: 1 Msgs - 07/13/04 (Doug Peyton) ________________________________ Message 1 _____________________________________ Time: 07:30:32 AM PST US From: "Doug Peyton" Subject: KR-List: RE: KR-List Digest: 1 Msgs - 07/13/04 --> KR-List message posted by: "Doug Peyton" I would like to sell my KR-2. I lifted it off the runway once, did a ground loop. All is repaired now, and have converted to tricycle landing gear. I've lost interest in the project. $7,000. ----Original Message Follows---- From: KR-List Digest Server Subject: KR-List Digest: 1 Msgs - 07/13/04 * ================================================== Online Versions of Today's List Digest Archive ================================================== Today's complete KR-List Digest can be also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the KR-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/kr-list/Digest.KR-List.2004-07-13.html Text Version: http://www.matronics.com/digest/kr-list/Digest.KR-List.2004-07-13.txt ================================================ EMail Version of Today's List Digest Archive ================================================ KR-List Digest Archive --- Total Messages Posted Tue 07/13/04: 1 Today's Message Index: ---------------------- 1. 12:49 PM - Jabiru engines. (Harold Woods) ________________________________ Message 1 _____________________________________ Time: 12:49:01 PM PST US From: "Harold Woods" Subject: KR-List: Jabiru engines. --> KR-List message posted by: "Harold Woods" I was at a fly-in this past weekend. I had a good look at a 6 cylinder Jabiru engine. The case was machined out of a solid billet of aluminum. I was not cast. The 2 halves fitted together with out gaskets or sealants.You could run a white cloth over any part of the engine and it would be perfectly clean. The fins on the cylinders were also machined out of a single billet of aluminum, beautiful. The weight was 81 kg (178 lbs). Cost about $23,000 Canadian. The 4 cylinder model was around $15,000 Canadian. It is worth investigating. Harold Woods,Orillia, ON. Canada. haroldwoods@rogers.com http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/