----------------------------------------------------------
                           KR-List Digest Archive
                                      ---
                     Total Messages Posted Wed 11/03/04: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:10 AM - Wheel pants  (Bob Gibfried)
     2. 12:00 PM - Re: 2180 baffeling  ()
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:10:21 AM PST US
From: "Bob Gibfried" <rfg842@cox.net>
Subject: KR-List: Wheel pants

--> KR-List message posted by: "Bob Gibfried" <rfg842@cox.net>

Wonder if anyone has installed pants on a KR2S with Cleveland brakes.  I'm 
not quite sure how to install the inner, nut plates to install the pants. 
Am using the Diehl upper and lower leg fairings.

Need placement, shape and size of attachments.  Would really appreciate 
photos of the installation.

Bob, Wichita 






________________________________  Message 2  _____________________________________


Time: 12:00:45 PM PST US
From: <jeffyork40@qx.net>
Subject: KR-List: Re: 2180 baffeling

--> KR-List message posted by: <jeffyork40@qx.net>

I have been going through the projects list trying to find some really good
pictueres of the baffeling , Specifically the area around the intake tubes
as they come around the back of the eingine and exit down to the carb. This
is an area where I believe I am losing a lot of pressure and causing temp
problems.

Could someone reccomend to me their project site or another that I might be
able to see these details and get some descriptions.

Jeff York

KR-2
=====================================================================
>
>