---------------------------------------------------------- KR-List Digest Archive --- Total Messages Posted Mon 04/03/06: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:07 AM - Axels (Bob Gibfried) 2. 07:26 AM - Re: Axels (JEHayward@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:07:14 AM PST US From: "Bob Gibfried" Subject: KR-List: Axels --> KR-List message posted by: "Bob Gibfried" Has anyone drilled the Wicks aluminum axles on the Cleveland Brakes for an 8/ or 10/32 machine screw to mount the wheel pants? Looks like the hole is real shallow and the cotter key would interfere. Bob, Wichita ________________________________ Message 2 _____________________________________ Time: 07:26:07 AM PST US From: JEHayward@aol.com Subject: Re: KR-List: Axels --> KR-List message posted by: JEHayward@aol.com In a message dated 4/3/2006 8:07:47 AM Mountain Standard Time, rfg842@cox.net writes: > Has anyone drilled the Wicks aluminum axles on the Cleveland Brakes for an > 8/ or 10/32 machine screw to mount the wheel pants? Looks like the hole is > real shallow and the cotter key would interfere. Bob, there's hardly any activity here at all. It's all over on the KRNet list. Jim Hayward Rapid City, SD