Today's Message Index:
----------------------
1. 09:57 AM - L-29 parts needed ()
2. 01:40 PM - Re: L-29 parts needed (zach mcneill)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | L-29 parts needed |
1.25 RCVD_NUMERIC_HELO Received: contains an IP address used for HELO
--> L29-List message posted by: <mig21driver@charter.net>
Hi..I'm looking for a few parts to complete my L-29. I need the motor mount bolts
(two large bolts that hold the motor to the mount at the 3 and 9 o"clock position.)
I also need the terminal junction block for the EGT thermocouples. It is located
on the front of the EGT wiring tray on the right side of the can assembly.
All 8 EGT wires are attached and they junction to the aircraft wiring at that
point.
I need the large drain tube that runs down the top of the burner can assembly.
It's about 5' long, and is the larger of the two located there.
I need 3 thermo blankets. I have some but need the two short ones that wrap the
very front of the burner can, not the diffuser, and the lower large blanket
just aft of them.
Also looking for The Fire Cock (nitrogen) valve in the front cockpit. It is located
just aft of the throttle quadrant. Any help on these parts would be great...
Thanks..Ken
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | L-29 parts needed |
1.96 DATE_IN_FUTURE_96_XX Date: is 96 hours or more after Received: date
1.72 MSGID_FROM_MTA_ID Message-Id for external message added locally
--> L29-List message posted by: "zach mcneill" <n777ze@comcast.net>
Ken:
Are you sure your aircraft has a fire cock?
Z
-----Original Message-----
From: owner-l29-list-server@matronics.com
[mailto:owner-l29-list-server@matronics.com] On Behalf Of
mig21driver@charter.net
Subject: L29-List: L-29 parts needed
--> L29-List message posted by: <mig21driver@charter.net>
Hi..I'm looking for a few parts to complete my L-29. I need the motor mount
bolts (two large bolts that hold the motor to the mount at the 3 and 9
o"clock position.)
I also need the terminal junction block for the EGT thermocouples. It is
located on the front of the EGT wiring tray on the right side of the can
assembly. All 8 EGT wires are attached and they junction to the aircraft
wiring at that point.
I need the large drain tube that runs down the top of the burner can
assembly. It's about 5' long, and is the larger of the two located there.
I need 3 thermo blankets. I have some but need the two short ones that wrap
the very front of the burner can, not the diffuser, and the lower large
blanket just aft of them.
Also looking for The Fire Cock (nitrogen) valve in the front cockpit. It is
located just aft of the throttle quadrant. Any help on these parts would be
great... Thanks..Ken
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|