---------------------------------------------------------- L29-List Digest Archive --- Total Messages Posted Sun 01/22/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:49 AM - Re: [SPAM] Parts needed (Bill) 2. 06:50 AM - Re: [SPAM] Re: Parts needed (Bill) 3. 10:08 AM - Re: [SPAM] Parts needed (roma@airmail.net) 4. 11:32 PM - Landing Light (SD737@aol.com) ________________________________ Message 1 _____________________________________ Time: 06:49:43 AM PST US From: "Bill" Subject: Re: [SPAM] L29-List: Parts needed --> L29-List message posted by: "Bill" A guy in Minnesota building tail dollies. $2000 max. A good deal. But if your still looking for "cheap" parts, then you may have to make one. ----- Original Message ----- From: "Brian Colombo" Sent: Saturday, January 21, 2006 7:37 PM Subject: [SPAM] L29-List: Parts needed > --> L29-List message posted by: "Brian Colombo" > > Ok, I need some parts again. I need the front gear "down" position switch. > It is square, has a plunger for the switch and says 702 on it. I was able > to get the actual micro switch that goes inside from Doug but I was hoping > to find a comp. unit. I also need a tach and tach/gen for a ground use > project. Last I need some pics of a few tail dolly's so I can make one. > Please shoot me an e-mail if you can help with any of these items. I could > also use a connection for some O2 hoses that connects to the reg. > bcolombo@twcny.rr.com > > > ________________________________ Message 2 _____________________________________ Time: 06:50:01 AM PST US From: "Bill" Subject: Re: [SPAM] Re: L29-List: Parts needed --> L29-List message posted by: "Bill" How much $$. ----- Original Message ----- From: Sent: Saturday, January 21, 2006 11:15 PM Subject: [SPAM] Re: L29-List: Parts needed > --> L29-List message posted by: Colyergreg@aol.com > > > In a message dated 1/21/2006 5:39:02 P.M. Pacific Standard Time, > Bcolombo@twcny.rr.com writes: > > bcolombo@twcny.rr.com > > > I think I can help you with some of the stuff. I am pretty sure I have a > complete new Gear selector switch. This has both buttons, it's the > complete > unit. I will check my supplies tomorrow when out at the hanger.... > > Greg Colyer > > > ________________________________ Message 3 _____________________________________ Time: 10:08:29 AM PST US Subject: Re: [SPAM] L29-List: Parts needed From: roma@airmail.net --> L29-List message posted by: roma@airmail.net > --> L29-List message posted by: "Bill" >Hi I have these parts also if needed Roma > A guy in Minnesota building tail dollies. $2000 max. A good deal. But if > your still looking for "cheap" parts, then you may have to make one. > > > ----- Original Message ----- > From: "Brian Colombo" > To: > Sent: Saturday, January 21, 2006 7:37 PM > Subject: [SPAM] L29-List: Parts needed > > >> --> L29-List message posted by: "Brian Colombo" >> >> Ok, I need some parts again. I need the front gear "down" position >> switch. >> It is square, has a plunger for the switch and says 702 on it. I was >> able >> to get the actual micro switch that goes inside from Doug but I was >> hoping >> to find a comp. unit. I also need a tach and tach/gen for a ground use >> project. Last I need some pics of a few tail dolly's so I can make one. >> Please shoot me an e-mail if you can help with any of these items. I >> could >> also use a connection for some O2 hoses that connects to the reg. >> bcolombo@twcny.rr.com >> >> >> >> >> >> >> >> >> >> >> >> >> > > ________________________________ Message 4 _____________________________________ Time: 11:32:40 PM PST US From: SD737@aol.com Subject: L29-List: Landing Light --> L29-List message posted by: SD737@aol.com Flew home last night and found my landing light bulb shattered. Does anyone know of a U.S. crossover for the landing light? On my way to a specialty bulb place here in town tomorrow, but thought I would ask the group if anyone had a US number. Thanks.