---------------------------------------------------------- L29-List Digest Archive --- Total Messages Posted Fri 10/12/07: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:42 AM - Re: Wheel balance (Jorgen Nielsen) ________________________________ Message 1 _____________________________________ Time: 09:42:01 AM PST US From: "Jorgen Nielsen" Subject: RE: L29-List: Wheel balance Had mine done today. Will fit and test tomorrow. Thanks to all ' this is definitely the right way to do it! _____ From: owner-l29-list-server@matronics.com [mailto:owner-l29-list-server@matronics.com] On Behalf Of Bill Sent: 11 October 2007 12:25 AM Subject: Re: L29-List: Wheel balance They are rubber. ----- Original Message ----- From: Jorgen Nielsen Sent: Wednesday, October 10, 2007 3:55 PM Subject: RE: L29-List: Wheel balance Are these special type weights or the normal ones? I.e, are they rounded to prevent puncturing the tube? _____ From: owner-l29-list-server@matronics.com [mailto:owner-l29-list-server@matronics.com] On Behalf Of Robert Schwartz Sent: 10 October 2007 11:43 PM Subject: Re: L29-List: Wheel balance have to balance tires and use internal stick on weights that go between wheel and intertube. only safe way to get ride of vibration. with the jets ouside weights are dangerous, can come off and be sucked in., I got rid of all vibration using this method also works for the YAK bob schwartz ----- Original Message ---- From: Jorgen Nielsen Sent: Wednesday, October 10, 2007 2:09:33 PM Subject: RE: L29-List: Wheel balance Yes also my front tyre. Will let you know re cartridges via email. _____ From: owner-l29-list-server@matronics.com [mailto:owner-l29-list-server@matronics.com] On Behalf Of delfin@mail.pf Sent: 10 October 2007 08:13 PM Subject: Re: L29-List: Wheel balance I thing it is a good idea. In fact, only the nose wheel needs sometimes a balance. By chance, mine is perfectly balanced without anything. Jorgen, have-you any news for the cartridges ? Le 10 oct. 07 =E0 03:18, Colyergreg a =E9crit : We don't Sent from my iPhone. Have a great day! Greg On Oct 10, 2007, at 12:44 AM, "Jorgen Nielsen" wrote: How do you guys balance the wheels on your L29s? I had mine done but with those sticky weights that I then pulled off as I was concerned it would come off and go through engine. I thought to do it again, but mark the position, remove, and re-attach using epoxy. Jorgen href="http://www.matronics.com/Navigator?L29-List">http://www.matronics .com/ Navigator?L29-List href="http://forums.matronics.com">http://forums.matronics.com http://forums.matronic==============