---------------------------------------------------------- L29-List Digest Archive --- Total Messages Posted Sat 03/12/16: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:43 AM - Rear Canopy Roller Release Mech (Anthony Royal) 2. 10:42 AM - Re: Rear Canopy Roller Release Mech (Jon) 3. 10:54 AM - Re: Rear Canopy Roller Release Mech (Bill Geipel) 4. 10:56 AM - Re: Rear Canopy Roller Release Mech (Bill Geipel) 5. 01:55 PM - Test (Bill Geipel) 6. 01:57 PM - Re: Rear Canopy Roller Release Mech (Bill Geipel) ________________________________ Message 1 _____________________________________ Time: 09:43:50 AM PST US From: Anthony Royal Subject: L29-List: Rear Canopy Roller Release Mech Does anyone know the thread size of the hole in the top of the rear canopy ( and maybe how long the rod needs to be) that accepts the rod/fixture to d isable/jam the canopy roller release mechanism? =C2-I need to make a rod to lock out the mechanism when I am working on the canopy. Just tripped the system and it's not fun getting everything back in place and re-armedThank s=C2-Anthony ________________________________ Message 2 _____________________________________ Time: 10:42:41 AM PST US Subject: Re: L29-List: Rear Canopy Roller Release Mech From: Jon Tony, Sounds like your doing some project. Let me know when it's done. I'd like to see it and maybe do some formation again. Jon On Mar 12, 2016 12:45 PM, "Anthony Royal" wrote: > Does anyone know the thread size of the hole in the top of the rear canopy > ( and maybe how long the rod needs to be) that accepts the rod/fixture to > disable/jam the canopy roller release mechanism? I need to make a rod to > lock out the mechanism when I am working on the canopy. Just tripped the > system and it's not fun getting everything back in place and re-armed > Thanks > Anthony > ________________________________ Message 3 _____________________________________ Time: 10:54:32 AM PST US From: Bill Geipel Subject: Re: L29-List: Rear Canopy Roller Release Mech 8mm. 4" Sent from my iPad > On Mar 13, 2016, at 03:42, Jon wrote: > > Tony, > > Sounds like your doing some project. Let me know when it's done. I'd like t o see it and maybe do some formation again. > > Jon > >> On Mar 12, 2016 12:45 PM, "Anthony Royal" wrote: >> Does anyone know the thread size of the hole in the top of the rear canop y ( and maybe how long the rod needs to be) that accepts the rod/fixture to d isable/jam the canopy roller release mechanism? I need to make a rod to loc k out the mechanism when I am working on the canopy. Just tripped the system and it's not fun getting everything back in place and re-armed >> Thanks >> Anthony ________________________________ Message 4 _____________________________________ Time: 10:56:41 AM PST US From: Bill Geipel Subject: Re: L29-List: Rear Canopy Roller Release Mech Cut the head of the bolt off, then Dremel a slot in it for screw driver. The n it is flush. Screw it in until it stops. Sent from my iPad > On Mar 13, 2016, at 03:42, Jon wrote: > > Tony, > > Sounds like your doing some project. Let me know when it's done. I'd like t o see it and maybe do some formation again. > > Jon > >> On Mar 12, 2016 12:45 PM, "Anthony Royal" wrote: >> Does anyone know the thread size of the hole in the top of the rear canop y ( and maybe how long the rod needs to be) that accepts the rod/fixture to d isable/jam the canopy roller release mechanism? I need to make a rod to loc k out the mechanism when I am working on the canopy. Just tripped the system and it's not fun getting everything back in place and re-armed >> Thanks >> Anthony ________________________________ Message 5 _____________________________________ Time: 01:55:50 PM PST US From: Bill Geipel Subject: L29-List: Test Test Sent from my iPad ________________________________ Message 6 _____________________________________ Time: 01:57:31 PM PST US From: Bill Geipel Subject: Re: L29-List: Rear Canopy Roller Release Mech 8mm. 4". Put it in and leave it. Cut the head off and Dremel it for a scre w driver. Sent from my iPad > On Mar 13, 2016, at 02:40, Anthony Royal wrote: > > Does anyone know the thread size of the hole in the top of the rear canopy ( and maybe how long the rod needs to be) that accepts the rod/fixture to d isable/jam the canopy roller release mechanism? I need to make a rod to loc k out the mechanism when I am working on the canopy. Just tripped the system and it's not fun getting everything back in place and re-armed > Thanks > Anthony ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message l29-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/L29-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/l29-list Browse Digests http://www.matronics.com/digest/l29-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.