Today's Message Index:
----------------------
1. 07:20 AM - issues? (skidmk)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Gents,
I filled the cooling unit oil reservoir several times over the past few days. Approximately
250 ml was used in total. In all cases the reservoir slowly emptied,
and a steady dripping leak saw observed coming from an unidentifiable unit
below the Cooling Turbine (as labeled and observed via borescope.)
I can confirm that there is no leak in the reservoir or the hose running down to
the Turbine unit. The leak is internal to the Cooling Turbine and/or the assembly
attached below it.
Image
Oil is coming from unit with 3 holes in center of photo. Appears to be from left
hand holes only. (Looking up)
FUEL LEAK
A fuel leak has developed out of the overflow pipe located just aft of the large
belly panel I had removed to investigate the oil leak. The fuel appears to
be coming from a rectangular unit just below the burner cans.
Rectangular unit that fuel is draining from. (Looking aft)
Any further thoughts?
--------
Mike "Skidmk" Bourget
Ottawa, Ontario
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=460685#460685
Attachments:
http://forums.matronics.com//files/fuel_drain_130.jpg
http://forums.matronics.com//files/turbine_232.jpg
http://forums.matronics.com//files/borescope_192.jpg
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|