Today's Message Index:
----------------------
1. 10:29 AM - Lancair Factor Builder-Assist course (Romeo, Frank A)
2. 11:14 AM - Re: Lancair Factor Builder-Assist course (Chat Daniel)
3. 11:28 AM - Re: Lancair Factor Builder-Assist course (DJ Molny)
4. 11:33 AM - Re: Lancair Factor Builder-Assist course (Ron Raby)
5. 11:39 AM - Re: Lancair Factor Builder-Assist course (Ron Raby)
6. 11:54 AM - Re: Lancair Factor Builder-Assist course (Ron Raby)
7. 09:37 PM - Re: Lancair Factor Builder-Assist course (Nvatp@cs.com)
8. 10:05 PM - Re: Lancair Factor Builder-Assist course (Erik Wahlstrom)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Lancair Factor Builder-Assist course |
FORGED_MUA_IMS, MSG_ID_ADDED_BY_MTA_2
--> Lancair-List message posted by: "Romeo, Frank A" <Frank.Romeo@constellation.com>
Hello Lancair Enthusiasts -
I took the plunge and put down my deposit on a Legacy kit during my visit to
Oshkosh this summer, and I'm scheduled to go do the factory assist course
(for 2 wks) in a few months. I was wondering if I could tap into the
experience on this list to request your help on recommendations for things
that I should get ahead of time and take with me. Any "lessons learned" to
share from those of you that have been through it? Any "pre-packaged"
groupings you bought from their list that you later regretted? I'm looking
fwd to the project.
The other thing I observed - this is one of the quietest groups I've ever
seen. Is anybody else out there?
Frank Romeo
Lancair Legacy 2000 kit builder (soon)
Mooney 201 pilot (now)
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "Chat Daniel" <cdaniel@fnbsouth.com>
Frank,
I am also going to Redmond soon...October 6th and I'm building an ES.
This will be the third plane I have built. First a Kitfox, then an RV-8
which I am flying now. I'm really tired of building planes so I'm
getting all the fast build stuff they offer...kit, firewall, engine and
panel. Since I've never dealt with Lancair before, I don't have any
advice about what they offer or you should do...but I might be able to
help you with general building questions.
I was on the RV list for about 3 years and we got 10 to 20 posts a day.
I have been on this list for about 2 months and I think you are the
second post.
Chat Daniel
N678RV
N891AC (reserved)
-----Original Message-----
From: owner-lancair-list-server@matronics.com
[mailto:owner-lancair-list-server@matronics.com] On Behalf Of Romeo,
Frank A
Subject: Lancair-List: Lancair Factor Builder-Assist course
--> Lancair-List message posted by: "Romeo, Frank A"
--> <Frank.Romeo@constellation.com>
Hello Lancair Enthusiasts -
I took the plunge and put down my deposit on a Legacy kit during my
visit to Oshkosh this summer, and I'm scheduled to go do the factory
assist course (for 2 wks) in a few months. I was wondering if I could
tap into the experience on this list to request your help on
recommendations for things that I should get ahead of time and take with
me. Any "lessons learned" to share from those of you that have been
through it? Any "pre-packaged"
groupings you bought from their list that you later regretted? I'm
looking
fwd to the project.
The other thing I observed - this is one of the quietest groups I've
ever seen. Is anybody else out there? Frank Romeo Lancair Legacy 2000
kit builder (soon) Mooney 201 pilot (now)
direct advertising on the Matronics Forums.
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "DJ Molny" <djmolny@yahoo.com>
Guys -
The Lancair Mailing List ("LML") is much more active. Go to:
http://www.lancaironline.net/
Regards,
DJ Molny
djmolny@yahoo.com
-----Original Message-----
From: owner-lancair-list-server@matronics.com
[mailto:owner-lancair-list-server@matronics.com] On Behalf Of Chat Daniel
Subject: RE: Lancair-List: Lancair Factor Builder-Assist course
--> Lancair-List message posted by: "Chat Daniel" <cdaniel@fnbsouth.com>
Frank,
I am also going to Redmond soon...October 6th and I'm building an ES. This
will be the third plane I have built. First a Kitfox, then an RV-8 which I
am flying now. I'm really tired of building planes so I'm getting all the
fast build stuff they offer...kit, firewall, engine and panel. Since I've
never dealt with Lancair before, I don't have any advice about what they
offer or you should do...but I might be able to help you with general
building questions.
I was on the RV list for about 3 years and we got 10 to 20 posts a day. I
have been on this list for about 2 months and I think you are the second
post.
Chat Daniel
N678RV
N891AC (reserved)
-----Original Message-----
From: owner-lancair-list-server@matronics.com
[mailto:owner-lancair-list-server@matronics.com] On Behalf Of Romeo, Frank A
Subject: Lancair-List: Lancair Factor Builder-Assist course
--> Lancair-List message posted by: "Romeo, Frank A"
--> <Frank.Romeo@constellation.com>
Hello Lancair Enthusiasts -
I took the plunge and put down my deposit on a Legacy kit during my visit to
Oshkosh this summer, and I'm scheduled to go do the factory assist course
(for 2 wks) in a few months. I was wondering if I could tap into the
experience on this list to request your help on recommendations for things
that I should get ahead of time and take with me. Any "lessons learned" to
share from those of you that have been through it? Any "pre-packaged"
groupings you bought from their list that you later regretted? I'm
looking
fwd to the project.
The other thing I observed - this is one of the quietest groups I've ever
seen. Is anybody else out there? Frank Romeo Lancair Legacy 2000 kit
builder (soon) Mooney 201 pilot (now)
direct advertising on the Matronics Forums.
advertising on the Matronics Forums.
Share: Share photos & files with other List members.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "Ron Raby" <ronr@advanceddesign.com>
Frank
Any composite experience that you can get before you go would be helpful. I
went to a sportair weekend seminar. I went to a one week builders assist on
my plane a lancair ES. At that time there was a legacy builders assist going
on. They really get a lot done and that was two years ago. One thing that I
did that really helped allot was I hired a professional builder to come out
for a week. He showed me many composite techniques that really helped
through the project. I would also recommend joining the aeroelectric list.
Good luck
Ron Raby
Lancair ES
----- Original Message -----
From: "Romeo, Frank A" <Frank.Romeo@constellation.com>
Subject: Lancair-List: Lancair Factor Builder-Assist course
> --> Lancair-List message posted by: "Romeo, Frank A"
<Frank.Romeo@constellation.com>
>
> Hello Lancair Enthusiasts -
> I took the plunge and put down my deposit on a Legacy kit during my visit
to
> Oshkosh this summer, and I'm scheduled to go do the factory assist course
> (for 2 wks) in a few months. I was wondering if I could tap into the
> experience on this list to request your help on recommendations for things
> that I should get ahead of time and take with me. Any "lessons learned"
to
> share from those of you that have been through it? Any "pre-packaged"
> groupings you bought from their list that you later regretted? I'm
looking
> fwd to the project.
>
> The other thing I observed - this is one of the quietest groups I've ever
> seen. Is anybody else out there?
> Frank Romeo
> Lancair Legacy 2000 kit builder (soon)
> Mooney 201 pilot (now)
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "Ron Raby" <ronr@advanceddesign.com>
Chat
There is an ES user's group that is quite active at:
Lancair_ES@yahoogroups.com
Ron Raby
Lancair ES
----- Original Message -----
From: "Chat Daniel" <cdaniel@fnbsouth.com>
Subject: RE: Lancair-List: Lancair Factor Builder-Assist course
> --> Lancair-List message posted by: "Chat Daniel" <cdaniel@fnbsouth.com>
>
> Frank,
>
> I am also going to Redmond soon...October 6th and I'm building an ES.
> This will be the third plane I have built. First a Kitfox, then an RV-8
> which I am flying now. I'm really tired of building planes so I'm
> getting all the fast build stuff they offer...kit, firewall, engine and
> panel. Since I've never dealt with Lancair before, I don't have any
> advice about what they offer or you should do...but I might be able to
> help you with general building questions.
>
> I was on the RV list for about 3 years and we got 10 to 20 posts a day.
> I have been on this list for about 2 months and I think you are the
> second post.
>
>
> Chat Daniel
> N678RV
> N891AC (reserved)
> -----Original Message-----
> From: owner-lancair-list-server@matronics.com
> [mailto:owner-lancair-list-server@matronics.com] On Behalf Of Romeo,
> Frank A
> To: lancair-list-digest@matronics.com
> Subject: Lancair-List: Lancair Factor Builder-Assist course
>
>
> --> Lancair-List message posted by: "Romeo, Frank A"
> --> <Frank.Romeo@constellation.com>
>
> Hello Lancair Enthusiasts -
> I took the plunge and put down my deposit on a Legacy kit during my
> visit to Oshkosh this summer, and I'm scheduled to go do the factory
> assist course (for 2 wks) in a few months. I was wondering if I could
> tap into the experience on this list to request your help on
> recommendations for things that I should get ahead of time and take with
> me. Any "lessons learned" to share from those of you that have been
> through it? Any "pre-packaged"
> groupings you bought from their list that you later regretted? I'm
> looking
> fwd to the project.
>
> The other thing I observed - this is one of the quietest groups I've
> ever seen. Is anybody else out there? Frank Romeo Lancair Legacy 2000
> kit builder (soon) Mooney 201 pilot (now)
>
>
> direct advertising on the Matronics Forums.
>
>
>
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "Ron Raby" <ronr@advanceddesign.com>
I screwed up the link. here is the right one
Ron Raby
http://groups.yahoo.com/group/Lancair_ES/
----- Original Message -----
From: "Ron Raby" <ronr@advanceddesign.com>
Subject: Re: Lancair-List: Lancair Factor Builder-Assist course
> --> Lancair-List message posted by: "Ron Raby" <ronr@advanceddesign.com>
>
> Chat
>
> There is an ES user's group that is quite active at:
>
> Lancair_ES@yahoogroups.com
>
> Ron Raby
>
> Lancair ES
>
>
> ----- Original Message -----
> From: "Chat Daniel" <cdaniel@fnbsouth.com>
> To: <lancair-list@matronics.com>
> Subject: RE: Lancair-List: Lancair Factor Builder-Assist course
>
>
> > --> Lancair-List message posted by: "Chat Daniel" <cdaniel@fnbsouth.com>
> >
> > Frank,
> >
> > I am also going to Redmond soon...October 6th and I'm building an ES.
> > This will be the third plane I have built. First a Kitfox, then an RV-8
> > which I am flying now. I'm really tired of building planes so I'm
> > getting all the fast build stuff they offer...kit, firewall, engine and
> > panel. Since I've never dealt with Lancair before, I don't have any
> > advice about what they offer or you should do...but I might be able to
> > help you with general building questions.
> >
> > I was on the RV list for about 3 years and we got 10 to 20 posts a day.
> > I have been on this list for about 2 months and I think you are the
> > second post.
> >
> >
> > Chat Daniel
> > N678RV
> > N891AC (reserved)
> > -----Original Message-----
> > From: owner-lancair-list-server@matronics.com
> > [mailto:owner-lancair-list-server@matronics.com] On Behalf Of Romeo,
> > Frank A
> > To: lancair-list-digest@matronics.com
> > Subject: Lancair-List: Lancair Factor Builder-Assist course
> >
> >
> > --> Lancair-List message posted by: "Romeo, Frank A"
> > --> <Frank.Romeo@constellation.com>
> >
> > Hello Lancair Enthusiasts -
> > I took the plunge and put down my deposit on a Legacy kit during my
> > visit to Oshkosh this summer, and I'm scheduled to go do the factory
> > assist course (for 2 wks) in a few months. I was wondering if I could
> > tap into the experience on this list to request your help on
> > recommendations for things that I should get ahead of time and take with
> > me. Any "lessons learned" to share from those of you that have been
> > through it? Any "pre-packaged"
> > groupings you bought from their list that you later regretted? I'm
> > looking
> > fwd to the project.
> >
> > The other thing I observed - this is one of the quietest groups I've
> > ever seen. Is anybody else out there? Frank Romeo Lancair Legacy 2000
> > kit builder (soon) Mooney 201 pilot (now)
> >
> >
> > direct advertising on the Matronics Forums.
> >
> >
> >
> >
> >
> >
> >
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lancair Factor Builder-Assist course |
NO_REAL_NAME@matronics.com
--> Lancair-List message posted by: Nvatp@cs.com
For Chat, If you're really tired of building airplanes I's recommend you buy
something else! The Legacy takes a LOT more time and effort and money than
Lancair tells you!
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Lancair Factor Builder-Assist course |
--> Lancair-List message posted by: "Erik Wahlstrom" <erikwal@earthlink.net>
You right, it's way to quiet here. After we talking about the beautiful
Lancair's. So what are people building these days. I am seriously
considering a 360. Are there any land mines I should look out for when
buying a partially complete kit?
Cheers Erik
----- Original Message -----
From: "Romeo, Frank A" <Frank.Romeo@constellation.com>
Subject: Lancair-List: Lancair Factor Builder-Assist course
> --> Lancair-List message posted by: "Romeo, Frank A"
<Frank.Romeo@constellation.com>
>
> Hello Lancair Enthusiasts -
> I took the plunge and put down my deposit on a Legacy kit during my visit
to
> Oshkosh this summer, and I'm scheduled to go do the factory assist course
> (for 2 wks) in a few months. I was wondering if I could tap into the
> experience on this list to request your help on recommendations for things
> that I should get ahead of time and take with me. Any "lessons learned"
to
> share from those of you that have been through it? Any "pre-packaged"
> groupings you bought from their list that you later regretted? I'm
looking
> fwd to the project.
>
> The other thing I observed - this is one of the quietest groups I've ever
> seen. Is anybody else out there?
> Frank Romeo
> Lancair Legacy 2000 kit builder (soon)
> Mooney 201 pilot (now)
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|