Today's Message Index:
----------------------
1. 07:08 AM - factory visit. (Jeff Edison)
2. 09:31 AM - Re: factory visit. (Matt Dralle)
3. 11:07 AM - Re: factory visit. (Jeff Edison)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Ladies and Gents.
Recently I had the opportunity to swing by the factory in Redmond. It was
quite an experience, and I simply can not let the opportunity pass to share
the highlights with you all. They really rolled out the red carpet for my
visit.
First off, I met Kim Lorentzen. Most of you likely already know her name,
if you've done much business with Lancair. She's been there 25 years and
knows this business front to back. It was a pleasure to spend the day with
her. She took lots of time to show me around. I got to visit the avionics
shop, engine shop, builders assistance floor, speak to the tech reps, and
machine shop; but my favorite was the composite shop. The whole tour was
just fabulous.
I spent the end of the day over at RDD. It was a treat to be able to speak
with Mark Menkhe there. The knowledge level here is simple stellar. These
are resources we should all make use of. I was so impressed, I plan to
return to Redmond for the annual Lancair fly-in in the fall.
I'd like to express a giant THANK YOU to all the good people at Lancair.
I'm a bigger fan now, than I've ever been.
Jeff Edison
Lancair 360 owner #N754RP.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: factory visit. |
Super cool! Got any pictures?
Matt
At 07:08 AM 5/30/2014 Friday, you wrote:
>Ladies and Gents.
>Recently I had the opportunity to swing by the factory in Redmond. It was quite
an experience, and I simply can not let the opportunity pass to share the highlights
with you all. They really rolled out the red carpet for my visit.
>First off, I met Kim Lorentzen. Most of you likely already know her name, if
you've done much business with Lancair. She's been there 25 years and knows this
business front to back. It was a pleasure to spend the day with her. She
took lots of time to show me around. I got to visit the avionics shop, engine
shop, builders assistance floor, speak to the tech reps, and machine shop; but
my favorite was the composite shop. The whole tour was just fabulous.
>I spent the end of the day over at RDD. It was a treat to be able to speak with
Mark Menkhe there. The knowledge level here is simple stellar. These are
resources we should all make use of. I was so impressed, I plan to return to
Redmond for the annual Lancair fly-in in the fall.
>I'd like to express a giant THANK YOU to all the good people at Lancair. I'm
a bigger fan now, than I've ever been.
>Jeff Edison
>Lancair 360 owner #N754RP.
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: factory visit. |
Yes. I did manage to snap a few. Here are a couple from RDD.
Enjoy.
Sent from my iPhone
> On May 30, 2014, at 11:30 AM, Matt Dralle <dralle@matronics.com> wrote:
>
>
> Super cool! Got any pictures?
>
> Matt
>
>
> At 07:08 AM 5/30/2014 Friday, you wrote:
>> Ladies and Gents.
>> Recently I had the opportunity to swing by the factory in Redmond. =C3=82
It was quite an experience, and I simply can not let the opportunity pass t
o share the highlights with you all. =C3=82 They really rolled out the red c
arpet for my visit.
>> First off, I met Kim Lorentzen. =C3=82 Most of you likely already know he
r name, if you've done much business with Lancair. =C3=82 She's been there 2
5 years and knows this business front to back. =C3=82 It was a pleasure to s
pend the day with her. =C3=82 She took lots of time to show me around. =C3=82
I got to visit the avionics shop, engine shop, builders assistance floor, s
peak to the tech reps, and machine shop; but my favorite was the composite s
hop. =C3=82 The whole tour was just fabulous.
>> I spent the end of the day over at RDD. =C3=82 It was a treat to be able t
o speak with Mark Menkhe there. =C3=82 The knowledge level here is simple st
ellar. =C3=82 These are resources we should all make use of. =C3=82 I was so
impressed, I plan to return to Redmond for the annual Lancair fly-in in the
fall.
>> I'd like to express a giant THANK YOU to all the good people at Lancair. =C3
=82 I'm a bigger fan now, than I've ever been.
>> Jeff Edison
>> Lancair 360 owner #N754RP.
>
> -
> Matt Dralle
>
> RV-8 #82880 N998RV "Ruby Vixen"
> http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
> http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
> http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
> Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
>
> RV-6 #20916 N360EM "The Flyer"
> http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
> Status: 200+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer M
ode
>
> Matt's Livermore Airport Live ATC Stream!
> Check out the live ATC stream directly from my hangar at the Livermore
> Airport. Includes both Tower and Ground transmissions. Archives too!
> For entertainment purposes only. http://klvk.matronics.com
>
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|