Today's Message Index:
----------------------
1. 09:25 PM - July 4th in SYI (N1BZRich@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hello Lightning listers,
I flew N31BZ, my Esqual LS (lots of Lightning Stuff), back to "home
plate" (Shelbyville, TN) today. The purpose of this trip is three fold: first,
I am going to once again attend the Jabiru engine seminar this weekend (I
attended once before and it was great, but I thought a refresher might be good
for me), second, I need a small paint flaw corrected by the one and only
master Lightning painter, "Chad the Amazing", and third, I am finally going to
get
a chance to fly and evaluate the new demonstrator Lightning (N323AL). I
flew the Lightning prototype about a year ago (my write up is probably still in
the Lightning list archives) and now I will write a flight report based on my
experience with the prototype. Since it is a production kit and is built by
the same folks (Nick, Mark and Mike) that help customers with the builders
assist program here in Shelbyville, it represents exactly what a builder can
expect his Lightning to be. I look forward to the evaluation flight and will
fly about the same test profile that I used when I flew the prototype. I
actually flew a short flight this afternoon in the demo Lightning, just to get
used to the airplane, but the weather was not really "ideal" for a full
evaluation.
As a bit of additional information on what you can expect from your
Lightning, I had a nice flight from Virginia this morning in 31BZ although I did
have about 10 to 12 mph of effective headwinds until I got just north of
Knoxville, then mostly a cross wind on in to SYI. Total flying time from brake
release at Williamsburg to turning off the runway at Shelbyville airport was 3
hours and 32 minutes - so even with the headwinds my average ground speed
for the 550 miles was 156 mph. Fuel burn averaged 5.9 gph. I initially started
the trip at 6,500' but soon had to climb to 8,500 and then on up to 10,500
to stay VFR. The remainder of the flight was "on top" with the auto pilot on.
I am currently using a wooden 64ZK55 Sensenich, but this prop is still not
the optimum for the most efficient cruise as it still allows my engine to
over speed when at 5000' and full throttle. Nick will have more to say on the
best prop for the Lightning when he completes testing with a new blade
profile on a slightly shorter diameter prop with several more inches of pitch.
Don't bug him with questions just yet, let him complete the testing and he will
publish the results.
Blue Skies,
Buz
************************************** See what's free at http://www.aol.com.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|