Lightning-List Digest Archive
Sat 05/10/08 |
Total Messages Posted: 1 |
Today's Message Index:
----------------------
1. 08:56 PM - Warning! Cut your spinners, not your props! (Jim Langley)
Message 1
INDEX Back to Main INDEX NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 08:56:52 PM PST US
From: "Jim Langley" <pequeajim@gmail.com>
Subject: Warning! Cut your spinners, not your props!
Sorry, I'm sending this again because the picture size was too big.
Hopefully this will make it through.
To all:
Please beware that if you are using the new aluminum spinner with one of the
fixed pitched wooden propellers, you will need to grind out some relief so
that the spinner does not cut in to the prop.
It only take about 15-20 minutes. Go slow with a dremel and be careful not
to let it slip and dig into the surface of the spinner face.
See attached pics.
1998 shows where to cut.
2000 show the fit after cutting.
Hope this helps.
Jim!
Other Matronics Email List Services
Post A New Message lightning-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lightning-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com 7-Day List Browse http://www.matronics.com/browse/lightning-list Browse Lightning-List Digests http://www.matronics.com/digest/lightning-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.