Today's Message Index:
----------------------
1. 07:30 AM - Re: Fatal Lightning Aircraft Crash (jhausch)
2. 07:34 AM - Flying your Lightning for the first time (Jim Langley)
3. 07:58 AM - Re: Re: Fatal Lightning Aircraft Crash (James, Clive R)
4. 08:16 AM - Re: June Lightning Newsletter (N1BZRich@aol.com)
5. 08:26 AM - Re: June Lightning Newsletter (Jim Langley)
6. 09:00 AM - Fatal Lightning Aircraft Crash (Kayberg@AOL.COM)
7. 09:46 AM - Lightning crosswind ability (Hugh Sontag)
8. 09:56 AM - Re: Fatal Lightning Aircraft Crash (N1BZRich@aol.com)
9. 10:12 AM - Re: Lightning crosswind ability (EAFerguson@aol.com)
10. 10:22 AM - Re: Lightning crosswind ability (N1BZRich@aol.com)
11. 10:32 AM - Re: Re: Lightning crosswind ability (Jim Langley)
12. 10:50 AM - Re: Fatal Lightning Aircraft Crash (Johnny Thompson)
13. 11:27 AM - Re: Fatal Lightning Aircraft Crash (Jim Langley)
14. 11:46 AM - Re: Fatal Lightning Aircraft Crash (jhausch)
15. 12:52 PM - Re: Re: Fatal Lightning Aircraft Crash (Johnny Thompson)
16. 01:22 PM - Re: Lightning crosswind ability (Hugh Sontag)
17. 01:22 PM - Re: Flying your Lightning for the first time (Tex Mantell)
18. 01:33 PM - Re: Re: Fatal Lightning Aircraft Crash (Hugh Sontag)
19. 01:34 PM - Re: Flying your Lightning for the first time (Jim Langley)
20. 02:50 PM - Re: Fatal Lightning Aircraft Crash (Kayberg@aol.com)
21. 03:12 PM - Re: Flying your Lightning for the first time (Brian Whittingham)
22. 03:33 PM - Re: Flying your Lightning for the first time (Jim Langley)
23. 03:51 PM - Re: Fatal Lightning Aircraft Crash (Brian Whittingham)
24. 04:25 PM - Re: Flying your Lightning for the first time (Brian Whittingham)
25. 05:12 PM - Re: Fatal Lightning Aircraft Crash (GARY PENNINGTON)
26. 07:34 PM - Re: Fatal Lightning Aircraft Crash (Johnny Thompson)
27. 09:20 PM - Re: Fatal Lightning Aircraft Crash (Peter and Jan Disher)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Respectfully, when might we get some add'l news on this unfortunate accident?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=186489#186489
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Flying your Lightning for the first time |
Short of a few odds and ends like putting my tail number on and doing a
weight and balance, I am FINISHED WITH MY LIGHTNING!!!
(happy days, huh?)
Anyway, I have been spending some time talking with Ryan and Buz about the
next steps after the airworthyness inspection, and before I actually strap
myself into the seat and take off.
This is the way I am approaching things, your comments are welcome:
1. In preparation for flying my aircraft, I tried to find something that
I could rent that was close in type, i.e. stick, low wing, nose wheel, e
tc.
it is however, hard to be flying when you are spending time and money
building, but I have logged some hours.
2. I called Falcon and secured insurance on my Lightning with Ryan
included.
3. Ryan will be flying the first 5+ hours, and we will work together to
make sure everything is working as it should and nothing is going to "fa
ll
off".
4. Per suggestion, I am looking for something like a Katana to rent and
fly, as from what I have heard, it is pretty close to the Lightning
in feel.
Right now I am flying a Evektor SportStar only because it is the only
small low wing with a stick that I can find to rent.
5. Establish a defined test plan for multi-phase testing per FAA Advisor
y
Circular 90-89 and contingency plan for emergencies. I have been workin
g
off of a graciously supplied example for this.
6. I think after I have a few hours in my aircraft, I will be taking it
home right away. Lancaster, (KLNS) has two nice long and wide runways
and lots of room to fly, so I can practice different types of takeoffs a
nd
landings, and my area has a fair number of airports close, so I can "rin
g er
out" and still be within gliding distance of a good place to land. This
will help to break in the engine and build time on the aircraft. Doing
mostly landings and takeoffs is a little tougher on the engine during th
e
break-in period.
7. While I am flying and recording results, use this information to
develop an aircraft manual with weight & balance, limitations, performan
ce
data, etc=85
The cool thing about the MGL Odyssey that I put in the panel is that it can
act like a "black box" flight recorder and write this data to a SDRam card
while in flight. I can then go back and use this information to learn more
about my flight performance and characteristics; neat!
Once I have flown off the hours and am totally comfortable with the
aircraft, I can finally take my daughter up for a ride. (She's been buggin
g
me from day one).
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Some info to be gleaned from the Jabiru engines lists, CJ
-----Original Message-----
From: owner-lightning-list-server@matronics.com
[mailto:owner-lightning-list-server@matronics.com] On Behalf Of jhausch
Sent: 06 June 2008 15:28
Subject: Lightning-List: Re: Fatal Lightning Aircraft Crash
Respectfully, when might we get some add'l news on this unfortunate
accident?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=186489#186489
X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: from bp1xeuex002.bp1.ad.bp.com ([149.184.180.71]) by BP1XEUEX027-C.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Fri, 6 Jun 2008 10:49:31 +0100
MIME-Version: 1.0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Received: from bp1xeuex712.bp1.ad.bp.com ([149.182.218.243]) by bp1xeuex002.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Fri, 6 Jun 2008 10:49:31 +0100
Received: from bp1xeuav705.bp1.ad.bp.com ([149.182.218.240]) by bp1xeuex712.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Fri, 6 Jun 2008 10:49:31 +0100
Received: from mail164.messagelabs.com ([216.82.253.131]) by bp1xeuav705.bp1.ad.bp.com
with InterScan Messaging Security Suite; Fri, 06 Jun 2008 10:49:30 +0100
Received: (qmail 21291 invoked from network); 6 Jun 2008 09:49:25 -0000
Received: from mta109.mail.ukl.yahoo.com (HELO mta109.mail.ukl.yahoo.com) (217.12.11.46)
by server-8.tower-164.messagelabs.com with SMTP; 6 Jun 2008 09:49:25
-0000
Received: from 69.147.103.225 (HELO n14b.bullet.mail.re1.yahoo.com) (69.147.103.225)
by mta109.mail.ukl.yahoo.com with SMTP; Fri, 06 Jun 2008 09:49:24 +0000
Received: from [68.142.237.90] by n14.bullet.mail.re1.yahoo.com with NNFMP; 06
Jun 2008 09:49:23 -0000
Received: from [209.73.164.86] by t6.bullet.re3.yahoo.com with NNFMP; 06 Jun 2008
09:49:22 -0000
Received: from [66.218.67.114] by t8.bullet.scd.yahoo.com with NNFMP; 06 Jun 2008
09:49:22 -0000
Content-class: urn:content-classes:message
Subject: [jabiruengines] Digest Number 3346
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: [jabiruengines] Digest Number 3346
Thread-Index: AcjHup/hp+bGXMOFRyybhLaryns7nw=
List-Unsubscribe: <mailto:jabiruengines-unsubscribe@yahoogroups.com>
From: <jabiruengines@yahoogroups.com>
jabiru engines
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJkMWo3ZmpwBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNoZHIEc2xrA2
hwaARzdGltZQMxMjEyNzQ1NzYx>
Messages In This Digest (4 Messages)
1.1.
Re: Prop Hub From: Pete
1.2.
Re: Prop Hub From: Tom Covell
2a.
Prop Bolts From: Bill Evans
3.
Installing Propellers From: Bill Evans
View All Topics
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJmb3U5
M
HYyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkb
XNnBHNsawNhdHBjBHN0aW1lAzEyMTI3NDU3NjI-?xm=1&m=p&tidx=1> | Create
New
Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJmMGtsZWJ1
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkbXNnB
HNsawNudHBjBHN0aW1lAzEyMTI3NDU3NjI->
Messages
1.1.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22607;_ylc=X3oDMTJ
y
OG9qNHM2BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA3BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI3NDU3NjI->
Posted by: "Pete" pete@flylightning.net
<mailto:pete@flylightning.net?Subject= Re%3A%20Prop%20Hub> usjabiru
<http://profiles.yahoo.com/usjabiru>
Thu Jun 5, 2008 6:03 am (PDT)
All kits from Arion aircraft are built as Experimental Amateur
Built. They
are not eligible for an LSA certificate of any kind.
Pete
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 8:50 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Tom,
If your plane was built by Arion then it is an S-LSA. If it was
built by you
then it is probably an E-LSA.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 11:44 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
I don't know if it was an E or S. I also have the 3300 and
Sensinich ground
adjustable. I guess I didn't realize the prop hub bolts had to
be torqued
every 25 hours--thanks for the info.
Tom
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 11:15 AM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to
see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:pete@flylightning.net?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZm9zN2Nj
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA3BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI3NDU3NjI-?act=reply&messageNu
m
=22607>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
amZuMWowBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA3BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI3NDU3NjIEdHBjSWQDMTE2
MjI-> (38)
1.2.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22608;_ylc=X3oDMTJ
y
bXQzdTZpBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI3NDU3NjI->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3A%20Prop%20Hub>
desertfloats <http://profiles.yahoo.com/desertfloats>
Thu Jun 5, 2008 6:11 am (PDT)
Ivan,
It wasn't my prop hub that came off. I have a Rans S-6S that I
am waiting
for the DAR to inspect so I can go fly. I see Joe Hollars got
his
inspection OK(Congrats)
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 6:50 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Tom,
If your plane was built by Arion then it is an S-LSA. If it was
built by you
then it is probably an E-LSA.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 11:44 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
I don't know if it was an E or S. I also have the 3300 and
Sensinich ground
adjustable. I guess I didn't realize the prop hub bolts had to
be torqued
every 25 hours--thanks for the info.
Tom
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 11:15 AM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to
see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZ3ZuYjc2
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI3NDU3NjI-?act=reply&messageNu
m
=22608>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
ZzIzN3JyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI3NDU3NjIEdHBjSWQDMTE2
MjI-> (38)
2a.
Prop Bolts
<http://groups.yahoo.com/group/jabiruengines/message/22609;_ylc=X3oDMTJ
y
OThuNjFhBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI3NDU3NjI->
Posted by: "Bill Evans" wwevans@enter-net.com
<mailto:wwevans@enter-net.com?Subject= Re%3AProp%20Bolts> bil438
<http://profiles.yahoo.com/bil438>
Thu Jun 5, 2008 8:45 am (PDT)
Someone wrote
In a message dated 6/4/2008 2:14:41 P.M. Eastern Daylight Time,
imap8ntr@cox.net <mailto:imap8ntr%40cox.net>
<mailto:imap8ntr%40cox.net> writes:
180-200 ft-lbs ? Wow! That's a lot!
I read the posting to be 180-200 inch pounds not foot pounds.
Still it would be helpful to know whether there was a prop
extension
installed
Also the jabiru engine perform best with wooden propellers. This
is one
of the reasons why . It's very possible that vibration between
the
ground adjustable prop and the engine caused these bolts to
shake loose.
I also think it wise to mention that when you lockwire prop
bolts you
use .050" Inconel Lockwire. They should be lockwired in pairs to
prevent
embrittlement of the wire.
If you lockwire the nuts, you can see the lockwire without
removing the
spinner.
Bill Evans
2200a
Back to top
Reply to sender
<mailto:wwevans@enter-net.com?Subject=Re%3AProp%20Bolts> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3AProp%20Bolts>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyaTFpcDJh
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI3NDU3NjI-?act=reply&messageNu
m
=22609>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/21042;_ylc=X3oDMTM
3
bzgwbG1nBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI3NDU3NjIEdHBjSWQDMjEw
NDI-> (2)
3.
Installing Propellers
<http://groups.yahoo.com/group/jabiruengines/message/22610;_ylc=X3oDMTJ
y
dWp0YXEyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjEwBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI3NDU3NjI->
Posted by: "Bill Evans" wwevans@enter-net.com
<mailto:wwevans@enter-net.com?Subject= Re%3AInstalling%20Propellers>
bil438 <http://profiles.yahoo.com/bil438>
Thu Jun 5, 2008 8:48 am (PDT)
There is an old EAA Video on Installing Propellers by the Great
American Propeller Company. I haven't seen them advertise for
years.
Anyway I've watched that video numerous times and consider it to
be
gospel on installing propellers. I highly recommend it.
Bill E
2200a
Back to top
Reply to sender
<mailto:wwevans@enter-net.com?Subject=Re%3AInstalling%20Propellers> |
Reply to group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3AInstalling%20Propellers> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZGNkMG00
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jEwBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI3NDU3NjI-?act=reply&messageNu
m
=22610>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22610;_ylc=X3oDMTM
3
ZW4zMDQwBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjEwBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI3NDU3NjIEdHBjSWQDMjI2
MTA-> (1)
Recent Activity
*
9
New Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJmZnA5c
W
d1BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dG
wEc2xrA3ZtYnJzBHN0aW1lAzEyMTI3NDU3NjI->
*
2
New Photos
<http://groups.yahoo.com/group/jabiruengines/spnew;_ylc=X3oDMTJmZXMyMWN
s
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwE
c2xrA3ZwaG90BHN0aW1lAzEyMTI3NDU3NjI->
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJlNzcwcjZxBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwEc2xrA3
ZnaHAEc3RpbWUDMTIxMjc0NTc2Mg-->
Y! Sports for TV
Access it for free
<http://us.ard.yahoo.com/SIG=13o7vb29f/M=493064.12016236.12445728.997
769
3/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212752962/L=/B=Ov9lAE
LaX.I-/J=12
evt=4
9021/*http://digitalhome.yahoo.com/sports>
Get Fantasy Sports
stats on your TV.
Yahoo! News
Odd News
<http://us.ard.yahoo.com/SIG=13o6h3urd/M=493064.12016309.12445701.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212752962/L=/B=O_9lAE
LaX.I-/J=12
12745762647937/A=3848614/R=0/SIG=12t4qk00m/*http://news.yahoo.com/i
/757;
_ylt=A9FJqYzfwK5EFCQAswis0NUE;_ylu=X3oDMTA3NW1oMDRpBHNlYwM3NTc->
You won't believe
it, but it's true
Yahoo! Finance
It's Now Personal
<http://us.ard.yahoo.com/SIG=13ohceog7/M=493064.12016257.12445664.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212752962/L=/B=PP9lAE
LaX.I-/J=12
evt=5
0284/*http://finance.yahoo.com/personal-finance>
Guides, news,
advice & more.
Need to Reply?
Click one of the "Reply" links to respond to a specific message in the
Daily Digest.
Create New Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJlbG1lajNq
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA250cGMEc3RpbWUDMTIxMjc0NTc2Mg--> | Visit Your Group on the Web
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJjMjlzaWxpBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwBHN0aW1lAzEyMTI3NDU3NjI->
Messages
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJlaDZz
Z
WY0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA21zZ3MEc3RpbWUDMTIxMjc0NTc2Mg--> | Files
<http://groups.yahoo.com/group/jabiruengines/files;_ylc=X3oDMTJmZDZvZDJ
r
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2ZpbGVzBHN0aW1lAzEyMTI3NDU3NjI-> | Photos
<http://groups.yahoo.com/group/jabiruengines/photos;_ylc=X3oDMTJlOGRtbW
Z
qBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHI
Ec2xrA3Bob3QEc3RpbWUDMTIxMjc0NTc2Mg--> | Links
<http://groups.yahoo.com/group/jabiruengines/links;_ylc=X3oDMTJmN2xmNjM
3
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2xpbmtzBHN0aW1lAzEyMTI3NDU3NjI-> | Database
<http://groups.yahoo.com/group/jabiruengines/database;_ylc=X3oDMTJjczdw
d
jFlBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2RiBHN0aW1lAzEyMTI3NDU3NjI-> | Polls
<http://groups.yahoo.com/group/jabiruengines/polls;_ylc=X3oDMTJmcTY4bmt
n
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA3BvbGxzBHN0aW1lAzEyMTI3NDU3NjI-> | Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJlbThid
D
g1BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdH
IEc2xrA21icnMEc3RpbWUDMTIxMjc0NTc2Mg--> | Calendar
<http://groups.yahoo.com/group/jabiruengines/calendar;_ylc=X3oDMTJka2h0
M
GhwBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2NhbARzdGltZQMxMjEyNzQ1NzYy>
MARKETPLACE
Blockbuster is giving away a free trial of Blockbuster Total Access to
smart movie lovers like you.
<http://us.ard.yahoo.com/SIG=13rpm7q04/M=624381.12730922.13032918.108
355
68/D=groups/S=1705786083:MKP1/Y=YAHOO/EXP=1212752962/L=/B=Of9
lAELaX.I-/J
=1212745762647937/A=5368227/R=0/SIG=14evd63no/*http://media.adrev
olver.c
om/adrevolver/href?banner=189158&place=26143&url_=http://tc.deals.y
ahoo.
com/tc/blockbuster/display.com?cid=bbi00027>
<https://media.adrevolver.com/adrevolver/trace?adpath=11959>
Yahoo! Groups
<http://groups.yahoo.com/;_ylc=X3oDMTJkM2Y5Y2k5BF9TAzk3MzU5NzE1BGdycElk
A
zI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMjEyN
zQ1NzYy>
Change settings via the Web
<http://groups.yahoo.com/group/jabiruengines/join;_ylc=X3oDMTJmZTR1bmp2
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA3N0bmdzBHN0aW1lAzEyMTI3NDU3NjI-> (Yahoo! ID required)
Change settings via email: Switch delivery to Individual
<mailto:jabiruengines-normal@yahoogroups.com?subject=Email Delivery:
Indiviual Email> | Switch format to Traditional
<mailto:jabiruengines-traditional@yahoogroups.com?subject=Change
Delivery Format: Traditional>
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJkMHU2ZTRrBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwZgRzdGltZQMxMjEyNzQ1NzYy> | Yahoo! Groups Terms of Use
<http://docs.yahoo.com/info/terms/> | Unsubscribe
<mailto:jabiruengines-unsubscribe@yahoogroups.com?subject=Unsubscribe>
<http://geo.yahoo.com/serv?s=97359715/grpId=2772782/grpspId=1705786
083/m
sgId=3346/stime=1212745761/nc1=4767085/nc2=3848614/nc3=4507179>
X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: from bp1xeuex002.bp1.ad.bp.com ([149.184.180.71]) by BP1XEUEX027-C.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Thu, 5 Jun 2008 12:09:59 +0100
MIME-Version: 1.0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Received: from BP1XEUEX032.bp1.ad.bp.com ([149.184.176.166]) by bp1xeuex002.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Thu, 5 Jun 2008 12:09:59 +0100
Received: from BP1XEUAV003.bp1.ad.bp.com ([149.184.176.252]) by BP1XEUEX032.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Thu, 5 Jun 2008 12:09:58 +0100
Received: from mail51.messagelabs.com ([216.82.244.179]) by BP1XEUAV003.bp1.ad.bp.com
with InterScan Messaging Security Suite; Thu, 05 Jun 2008 12:09:57 +0100
Received: (qmail 12022 invoked from network); 5 Jun 2008 11:09:48 -0000
Received: from mta159.mail.ukl.yahoo.com (HELO mta159.mail.ukl.yahoo.com) (77.238.184.26)
by server-11.tower-51.messagelabs.com with SMTP; 5 Jun 2008 11:09:48
-0000
Received: from 66.163.168.169 (HELO n35c.bullet.mail.sp1.yahoo.com) (66.163.168.169)
by mta159.mail.ukl.yahoo.com with SMTP; Thu, 05 Jun 2008 11:09:48 +0000
Received: from [216.252.122.218] by n35.bullet.mail.sp1.yahoo.com with NNFMP;
05 Jun 2008 11:09:45 -0000
Received: from [209.73.164.86] by t3.bullet.sp1.yahoo.com with NNFMP; 05 Jun 2008
11:09:45 -0000
Received: from [66.218.67.114] by t8.bullet.scd.yahoo.com with NNFMP; 05 Jun 2008
11:09:45 -0000
Content-class: urn:content-classes:message
Subject: [jabiruengines] Digest Number 3345
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: [jabiruengines] Digest Number 3345
Thread-Index: AcjG/LUgY32tTq2tQ4yUtMO72aZ3Cg=
List-Unsubscribe: <mailto:jabiruengines-unsubscribe@yahoogroups.com>
From: <jabiruengines@yahoogroups.com>
jabiru engines
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJkajBuYW9iBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNoZHIEc2xrA2
hwaARzdGltZQMxMjEyNjY0MTU4>
Messages In This Digest (22 Messages)
1a.
Alternator stator loose From: Ian Clark
1b.
Re: Alternator stator loose From: n282rs@satx.rr.com
2.1.
Re: Prop Hub From: Greg Bakker
2.2.
Re: Prop Hub From: Tom Covell
2.3.
Re: Prop Hub From: Tom Covell
2.4.
Re: Prop Hub From: Tom Covell
2.5.
Re: Prop Hub From: Ivan
2.6.
Re: Prop Hub From: Ivan
2.7.
Re: Prop Hub From: palmettoe@aol.com
2.8.
Re: Prop Hub From: Ivan
2.9.
Re: Prop Hub From: Gerald Boughner
2.10.
Re: Prop Hub From: Tom Covell
2.11.
Re: Prop Hub From: Ivan
2.12.
Re: Prop Hub From: Ivan
2.13.
Re: Prop Hub From: Pete
2.14.
Re: Prop Hub From: Richard Williams
2.15.
Re: Prop Hub From: Ivan
2.16.
Re: Prop Hub From: palmettoe@aol.com
3.
Prop bolts sheared. From: Bill Evans
4.
Re: Where are comments from Jabiru USA? From: Ivan
5.
when? who? rebuilding the jab 2200 carburator?? From: bill
shamblin
6.
Fw: ivan-POH weight / balance / IDE4/ ASI From: Ivan
View All Topics
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJmdnJw
d
W90BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkb
XNnBHNsawNhdHBjBHN0aW1lAzEyMTI2NjQxNjU-?xm=1&m=p&tidx=1> | Create
New
Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJmMGozYjFm
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkbXNnB
HNsawNudHBjBHN0aW1lAzEyMTI2NjQxNjU->
Messages
1a.
Alternator stator loose
<http://groups.yahoo.com/group/jabiruengines/message/22585;_ylc=X3oDMTJ
y
dmMwbjY3BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg1BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ian Clark" iclark@rcn.com
<mailto:iclark@rcn.com?Subject= Re%3AAlternator%20stator%20loose>
iancti <http://profiles.yahoo.com/iancti>
Wed Jun 4, 2008 4:08 am (PDT)
My alternator stator came loose on my last flight it makes a
loud whining noise at low rpm that clears when you raise the rpm. There
is about 6 clicks per rev when you rotate the prop by hand. I have not
checked the extent of the damage yet.
I have a 3300 with about 200 hours on it
Ian
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:iclark@rcn.com?Subject=Re%3AAlternator%20stator%20loose> |
Reply
to group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3AAlternator%20stator%20loose> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyYjZpZ251
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg1BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22585>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22585;_ylc=X3oDMTM
3
cWptYzVmBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg1BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI1
ODU-> (2)
1b.
Re: Alternator stator loose
<http://groups.yahoo.com/group/jabiruengines/message/22587;_ylc=X3oDMTJ
y
cWFtcjA4BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg3BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "n282rs@satx.rr.com" n282rs@satx.rr.com
<mailto:n282rs@satx.rr.com?Subject=
Re%3A%20Alternator%20stator%20loose>
r5t0ut21 <http://profiles.yahoo.com/r5t0ut21>
Wed Jun 4, 2008 6:33 am (PDT)
Ian
That happened to me on my way back from Copperstate last year.
For me, the whirring noise was only there at lower engine speeds. I
noticed it first when I throttled back to land at Ft. Stockton, TX. I
took it apart as best I could with the couple of tools I had and it just
seemed that a couple of the screws were loose. I just tightened them and
continued my fight to San Antonio the next morning. Again the same noise
happened when I throttled back to land at home.
I disassembled the whole thing and found that 3 of the 4 screws
that hold the stator in place had broke off. I didn't see any evidence
of the magnets hitting the stator. I had made a bracket to support the
Ellison throttle body that I have. The bolts for this bracket attach in
a couple of empty holes in the same area, so I wondered if they might
have penetrated far enough to distort the stator.
I ended up replacing the stator mounting screws with AN-3 bolts
and added an extra washer under my Ellison bracket. That way I was sure
they didn't hit the stator. I also slid a piece of paper between the
magnets and stator to verify that there is clearance all around. Its
been working for about 30 hours now and I keep a close eye on it.
Randy Stout
San Antonio TX
www.geocities.com/n282rs
-----Original Message-----
From: "Ian Clark" <iclark@rcn.com <mailto:iclark%40rcn.com> >
Date: Wed, 4 Jun 2008 08:11:03
To:<jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> >
Subject: [jabiruengines] Alternator stator loose
My alternator stator came loose on my last flight it makes a
loud whining noise at low rpm that clears when you raise the rpm. There
is about 6 clicks per rev when you rotate the prop by hand. I have not
checked the extent of the damage yet.
I have a 3300 with about 200 hours on it
Ian
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:n282rs@satx.rr.com?Subject=Re%3A%20Alternator%20stator%20loose>
| Reply to group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3A%20Alternator%20stator%20loose> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyc29oZzhw
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg3BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22587>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22585;_ylc=X3oDMTM
3
a2x2MnAyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg3BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI1
ODU-> (2)
2.1.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22586;_ylc=X3oDMTJ
y
NXVxdThrBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg2BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Greg Bakker" gregbakker@hotkey.net.au
<mailto:gregbakker@hotkey.net.au?Subject= Re%3A%20Prop%20Hub>
gregbakker2001 <http://profiles.yahoo.com/gregbakker2001>
Wed Jun 4, 2008 5:50 am (PDT)
What aircraft/propeller combination is this, tractor or pusher?
I assume you
are talking about the standard Jabiru 2" extension as you
mention that bolts
were "pulled out of the crankshaft" These would have been lock
wired would
they not? So would torque be an issue? Unless they were torqued
incorrectly
at installation.
We need some more information here I feel.
Greg Bakker
Hamilton, Victoria Australia
www.varieze.net
----- Original Message -----
From: "Tom Covell" <tomcovell@theriver.com
<mailto:tomcovell%40theriver.com> >
To: <jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> >
Sent: Wednesday, June 04, 2008 12:01 PM
Subject: [jabiruengines] Prop Hub
> We had a prop hub come off of a 3300. Preliminary info is that
4 of
> the bolts were sheared and two were pulled out of the
crankshaft. I
> understand that Jabiru engineers are looking at it tomorrow.
Lots of
> speculation including proper Loc-tite (blue?) and proper
torque.
> Might check yours.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> __________ NOD32 3156 (20080603) Information __________
>
>
>
Back to top
Reply to sender
<mailto:gregbakker@hotkey.net.au?Subject=Re%3A%20Prop%20Hub> | Reply
to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJydG4xaTY2
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg2BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22586>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
Y2ZtbXVnBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg2BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.2.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22590;_ylc=X3oDMTJ
y
aDltYnA1BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkwBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3A%20Prop%20Hub>
desertfloats <http://profiles.yahoo.com/desertfloats>
Wed Jun 4, 2008 10:27 am (PDT)
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyM2Q3MjIz
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TkwBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22590>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
aWsxazZsBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkwBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.3.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22591;_ylc=X3oDMTJ
y
ZnRmb2FjBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkxBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3A%20Prop%20Hub>
desertfloats <http://profiles.yahoo.com/desertfloats>
Wed Jun 4, 2008 10:28 am (PDT)
Yes it was the flange coming off the crankshaft and yes it was
safety wired.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of John Lamb
Sent: Wednesday, June 04, 2008 12:56 AM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
And was it the hub of the prop coming off the flange, or the
flange
coming off the crankshaft?
I assume from the reference to Loctite that it was the latter.
Were
the nuts lock wired?
John Lamb
On 04/06/2008, at 2:00 PM, Ivan wrote:
> On what kind of airplane was the installation and what kind of
prop?
> Ivan
>
> ----- Original Message -----
> From: Tom Covell
> To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
> Sent: Tuesday, June 03, 2008 7:01 PM
> Subject: [jabiruengines] Prop Hub
>
> We had a prop hub come off of a 3300. Preliminary info is that
4 of
> the bolts were sheared and two were pulled out of the
crankshaft. I
> understand that Jabiru engineers are looking at it tomorrow.
Lots of
> speculation including proper Loc-tite (blue?) and proper
torque.
> Might check yours.
>
> [Non-text portions of this message have been removed]
>
>
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZjBjNzZu
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TkxBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22591>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
aHUyazU0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkxBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.4.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22592;_ylc=X3oDMTJ
y
NHRiNGkyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkyBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3A%20Prop%20Hub>
desertfloats <http://profiles.yahoo.com/desertfloats>
Wed Jun 4, 2008 10:34 am (PDT)
Gregg,
It was a tractor installation. It was lock wired and because, as
I
understand it, the bolts are "loose fit" it seems that the
torque and
Loc-tite would be an issue.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Greg Bakker
Sent: Wednesday, June 04, 2008 5:50 AM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
What aircraft/propeller combination is this, tractor or pusher?
I assume you
are talking about the standard Jabiru 2" extension as you
mention that bolts
were "pulled out of the crankshaft" These would have been lock
wired would
they not? So would torque be an issue? Unless they were torqued
incorrectly
at installation.
We need some more information here I feel.
Greg Bakker
Hamilton, Victoria Australia
www.varieze.net
----- Original Message -----
From: "Tom Covell" <tomcovell@theriver.
<mailto:tomcovell%40theriver.com>
com>
To: <jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com>
Sent: Wednesday, June 04, 2008 12:01 PM
Subject: [jabiruengines] Prop Hub
> We had a prop hub come off of a 3300. Preliminary info is that
4 of
> the bolts were sheared and two were pulled out of the
crankshaft. I
> understand that Jabiru engineers are looking at it tomorrow.
Lots of
> speculation including proper Loc-tite (blue?) and proper
torque.
> Might check yours.
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> __________ NOD32 3156 (20080603) Information __________
>
com
>
>
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJycGNpMGFx
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TkyBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22592>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
ZGw3a2IzBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkyBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.5.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22593;_ylc=X3oDMTJ
y
aWdpY2ZlBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkzBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 11:13 am (PDT)
I have a Sensinich prop ground adjustable on my J-250 which is a
S-LSA built by USA Jabiru. The Sensinich manual says to torque the
mounting bolts to 180-200 ft-lbs only annually. The hub bolts are
torqued each 25 hrs. I have done the hub bolts many times and never had
broken the torque. I spoke to the mechanic who did my annual and he said
that the mounting bolts did have to be tightened but nothing out of the
ordinary.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyM2lkcmhn
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TkzBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22593>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
bGI4aG0yBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTkzBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.6.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22594;_ylc=X3oDMTJ
y
OXVkZjg2BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk0BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 11:15 am (PDT)
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyODlocWp0
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk0BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22594>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
ZWdzbHJ2BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk0BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.7.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22595;_ylc=X3oDMTJ
y
ZzNndWsxBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk1BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "palmettoe@aol.com" palmettoe@aol.com
<mailto:palmettoe@aol.com?Subject= Re%3A%20Prop%20Hub> palmettoe
<http://profiles.yahoo.com/palmettoe>
Wed Jun 4, 2008 11:17 am (PDT)
In a message dated 6/4/2008 2:14:41 P.M. Eastern Daylight Time,
imap8ntr@cox.net <mailto:imap8ntr%40cox.net> writes:
180-200 ft-lbs ? Wow! That's a lot!
**************Get trade secrets for amazing burgers. Watch
"Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2
<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2>
)
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:palmettoe@aol.com?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZjNzbm1x
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk1BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22595>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
Mm9hbjRyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk1BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.8.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22596;_ylc=X3oDMTJ
y
aGhsdTVzBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk2BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 11:27 am (PDT)
Sorry, in-lbs.
Ivan
----- Original Message -----
From: palmettoe@aol.com <mailto:palmettoe%40aol.com>
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 11:17 AM
Subject: Re: [jabiruengines] Prop Hub
In a message dated 6/4/2008 2:14:41 P.M. Eastern Daylight Time,
imap8ntr@cox.net <mailto:imap8ntr%40cox.net> writes:
180-200 ft-lbs ? Wow! That's a lot!
**************Get trade secrets for amazing burgers. Watch
"Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2
<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2>
)
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyOXJjNmRq
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk2BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22596>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
Y2lnYTlyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk2BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.9.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22597;_ylc=X3oDMTJ
y
NXRic3JqBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk3BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Gerald Boughner" silverflier2000@yahoo.com
<mailto:silverflier2000@yahoo.com?Subject= Re%3A%20Prop%20Hub>
silverflier2000 <http://profiles.yahoo.com/silverflier2000>
Wed Jun 4, 2008 11:29 am (PDT)
According to Jabiru's instructions on installing the prop
flange: the 6 -3/8" UNF bolts should be torqued to 30 ft/lbs or 40 Nm in
a criss cross pattern.
Ivan <imap8ntr@cox.net <mailto:imap8ntr%40cox.net> > wrote: I
have a Sensinich prop ground adjustable on my J-250 which is a S-LSA
built by USA Jabiru. The Sensinich manual says to torque the mounting
bolts to 180-200 ft-lbs only annually. The hub bolts are torqued each 25
hrs. I have done the hub bolts many times and never had broken the
torque. I spoke to the mechanic who did my annual and he said that the
mounting bolts did have to be tightened but nothing out of the ordinary.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:silverflier2000@yahoo.com?Subject=Re%3A%20Prop%20Hub> | Reply
to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJycTl2bmlz
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk3BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22597>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
dHBscTFhBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk3BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.10.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22598;_ylc=X3oDMTJ
y
dHMwamU4BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3A%20Prop%20Hub>
desertfloats <http://profiles.yahoo.com/desertfloats>
Wed Jun 4, 2008 11:47 am (PDT)
Ivan,
I don't know if it was an E or S. I also have the 3300 and
Sensinich ground
adjustable. I guess I didn't realize the prop hub bolts had to
be torqued
every 25 hours--thanks for the info.
Tom
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 11:15 AM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to
see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyOWpmMGRq
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22598>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
NmlybDQyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.11.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22599;_ylc=X3oDMTJ
y
NHE1Mm5xBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 11:56 am (PDT)
Gerald,
Maybe we are talking about two different things. The Sensinich
manual says that the bolts mounting the propeller hub to the engine
mounting flange should be torqued to 180-200 in lbs. I see in the Jabiru
Engine manual that it says to torque the flang bolts to 30 ft-lbs. Maybe
the mounting bolts that Sensinich is talking about attatched the hub to
the flange and the Jabiru 30 ft-lb torqued bolts are those attatching
the flange to the engine shaft and not the prob hub?
Ivan
----- Original Message -----
From: Gerald Boughner
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 11:29 AM
Subject: Re: [jabiruengines] Prop Hub
According to Jabiru's instructions on installing the prop
flange: the 6 -3/8" UNF bolts should be torqued to 30 ft/lbs or 40 Nm in
a criss cross pattern.
Ivan <imap8ntr@cox.net <mailto:imap8ntr%40cox.net> > wrote: I
have a Sensinich prop ground adjustable on my J-250 which is a S-LSA
built by USA Jabiru. The Sensinich manual says to torque the mounting
bolts to 180-200 ft-lbs only annually. The hub bolts are torqued each 25
hrs. I have done the hub bolts many times and never had broken the
torque. I spoke to the mechanic who did my annual and he said that the
mounting bolts did have to be tightened but nothing out of the ordinary.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyN24xOTlz
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tk5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22599>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
bmVlMWxnBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTk5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.12.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22600;_ylc=X3oDMTJ
y
NmY1Z3VoBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAwBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 11:58 am (PDT)
Tom
Here is the literature I got with the Sensinich ground
adjustable composite prop: see attatched. Make sure it is the right one
applying to your prop.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 11:44 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
I don't know if it was an E or S. I also have the 3300 and
Sensinich ground
adjustable. I guess I didn't realize the prop hub bolts had to
be torqued
every 25 hours--thanks for the info.
Tom
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 11:15 AM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to
see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyOWtmOGJu
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jAwBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22600>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
Yjg3a3RiBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAwBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.13.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22602;_ylc=X3oDMTJ
y
cTkxczljBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAyBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Pete" pete@flylightning.net
<mailto:pete@flylightning.net?Subject= Re%3A%20Prop%20Hub> usjabiru
<http://profiles.yahoo.com/usjabiru>
Wed Jun 4, 2008 4:49 pm (PDT)
Attention all Jabiru Engine list members,
By Thursday morning I will have the correct procedure for
installing prop
hub extensions on Jabiru engines posted on www.usjabiru.com
<http://www.usjabiru.com/ <http://www.usjabiru.com/> > in the
engine manuals section on the support &
service page. That procedure is currently posted at
www.jabiru.net.au
<http://www.jabiru.net.au/ <http://www.jabiru.net.au/> > under
the manuals section in the Airframe
Construction Manuals Update table.
If you have not installed your prop hub extension using the
torque values
and sealants specified in the procedure (or in section 12 of the
engine
manual) you might consider doing it over exactly by the
procedure.
At this time we have no information as to the cause of the hub
leaving the
aircraft in Arizona but will be visiting with the NTSB
investigator
tomorrow. We will pass on any information that the NTSB will
authorize.
In the mean time, review the procedure from Jabiru and take the
action you
deem appropriate -- especially if you have not installed the
extension
with the sealant and torque values specified in the procedure
and Section 12
of the engine manual..
Pete Krotje
Jabiru USA Sport Aircraft, LLC
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 1:56 PM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Gerald,
Maybe we are talking about two different things. The Sensinich
manual says
that the bolts mounting the propeller hub to the engine mounting
flange
should be torqued to 180-200 in lbs. I see in the Jabiru Engine
manual that
it says to torque the flang bolts to 30 ft-lbs. Maybe the
mounting bolts
that Sensinich is talking about attatched the hub to the flange
and the
Jabiru 30 ft-lb torqued bolts are those attatching the flange to
the engine
shaft and not the prob hub?
Ivan
----- Original Message -----
From: Gerald Boughner
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 11:29 AM
Subject: Re: [jabiruengines] Prop Hub
According to Jabiru's instructions on installing the prop
flange: the 6
-3/8" UNF bolts should be torqued to 30 ft/lbs or 40 Nm in a
criss cross
pattern.
Ivan <imap8ntr@cox. <mailto:imap8ntr%40cox.net> net> wrote: I
have a
Sensinich prop ground adjustable on my J-250 which is a S-LSA
built by USA
Jabiru. The Sensinich manual says to torque the mounting bolts
to 180-200
ft-lbs only annually. The hub bolts are torqued each 25 hrs. I
have done the
hub bolts many times and never had broken the torque. I spoke to
the
mechanic who did my annual and he said that the mounting bolts
did have to
be tightened but nothing out of the ordinary.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:pete@flylightning.net?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyNDBkZjhw
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jAyBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22602>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
OTBtYmY4BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAyBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.14.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22603;_ylc=X3oDMTJ
y
Yjk0cmVyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAzBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Richard Williams" rkwill@lewiscounty.com
<mailto:rkwill@lewiscounty.com?Subject= Re%3A%20Prop%20Hub>
rkwill98356 <http://profiles.yahoo.com/rkwill98356>
Wed Jun 4, 2008 5:20 pm (PDT)
Palm, others,
I suspect the actual value is more like 180-200 INCH pounds
rather than foot pounds
180 foot pounds is 2160 inch pounds!
I think that NOTHING on the jab should be that tight (2160 inch
pounds), including the prop.
R. Williams
---------- Original Message -----------
From: palmettoe@aol.com <mailto:palmettoe%40aol.com>
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wed, 4 Jun 2008 14:17:15 EDT
Subject: Re: [jabiruengines] Prop Hub
> In a message dated 6/4/2008 2:14:41 P.M. Eastern Daylight
Time,
> imap8ntr@cox.net <mailto:imap8ntr%40cox.net> writes:
>
> 180-200 ft-lbs ? Wow! That's a lot!
>
> **************Get trade secrets for amazing burgers. Watch
"Cooking with
> Tyler Florence" on AOL Food.
>
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2
<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2>
)
>
> [Non-text portions of this message have been removed]
------- End of Original Message -------
Back to top
Reply to sender
<mailto:rkwill@lewiscounty.com?Subject=Re%3A%20Prop%20Hub> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject=
Re%3A%20Prop%20Hub>
| Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyaHZiZGdq
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jAzBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22603>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
ZzJhMzA1BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAzBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.15.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22605;_ylc=X3oDMTJ
y
b2llaTB0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA1BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 6:50 pm (PDT)
Tom,
If your plane was built by Arion then it is an S-LSA. If it was
built by you then it is probably an E-LSA.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Wednesday, June 04, 2008 11:44 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
I don't know if it was an E or S. I also have the 3300 and
Sensinich ground
adjustable. I guess I didn't realize the prop hub bolts had to
be torqued
every 25 hours--thanks for the info.
Tom
_____
From: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
[mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> ]
On Behalf Of Ivan
Sent: Wednesday, June 04, 2008 11:15 AM
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Subject: Re: [jabiruengines] Prop Hub
Tom
Is you Arion Lightining an S-LSA or E-LSA. If it is an S-LSA I
am curious to
see what kind of input Arion at Shelbyville has to add.
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Wednesday, June 04, 2008 10:25 AM
Subject: RE: [jabiruengines] Prop Hub
Ivan,
An Arion Lightining and a Sensinich ground adjustable.
_____
From: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com [mailto:jabiruengines@
<mailto:jabiruengines%40yahoogroups.com> yahoogroups.com]
On Behalf Of Ivan
Sent: Tuesday, June 03, 2008 9:00 PM
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Subject: Re: [jabiruengines] Prop Hub
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@ <mailto:jabiruengines%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJydHU3bjBn
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA1BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22605>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
MTNrMGk2BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA1BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
2.16.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22606;_ylc=X3oDMTJ
y
bDExanZjBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA2BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "palmettoe@aol.com" palmettoe@aol.com
<mailto:palmettoe@aol.com?Subject= Re%3A%20Prop%20Hub> palmettoe
<http://profiles.yahoo.com/palmettoe>
Thu Jun 5, 2008 2:22 am (PDT)
I felt such was the case, just wanted to make everyone aware,
thanks
John Matthews
www.usxair.com
In a message dated 6/4/2008 8:21:31 P.M. Eastern Daylight Time,
rkwill@lewiscounty.com <mailto:rkwill%40lewiscounty.com>
writes:
Palm, others,
I suspect the actual value is more like 180-200 INCH pounds
rather than foot
pounds
180 foot pounds is 2160 inch pounds!
I think that NOTHING on the jab should be that tight (2160 inch
pounds),
including the prop.
R. Williams
---------- Original Message -----------
From: _palmettoe@aol.pal <mailto:_palmettoe%40aol.pal> _
(mailto:palmettoe@aol.com <mailto:palmettoe%40aol.com> )
To: _jabiruengines@jabiruenginejab_
(mailto:jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com> )
Sent: Wed, 4 Jun 2008 14:17:15 EDT
Subject: Re: [jabiruengines] Prop Hub
> In a message dated 6/4/2008 2:14:41 P.M. Eastern Daylight
Time,
> _imap8ntr@cox.ima <mailto:_imap8ntr%40cox.ima> _
(mailto:imap8ntr@cox.net <mailto:imap8ntr%40cox.net> ) writes:
>
> 180-200 ft-lbs ? Wow! That's a lot!
>
> ************ ************<WBR>**Get trade secrets for amazing
burgers. Wa
> Tyler Florence" on AOL Food.
> (_http://food.http://food. <http://food.http://food.>
<Whttp://fohttp://f& <Whttp://fohttp://f&> <WBR>NCID=aolfod<WBR>NCID_
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2
<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2>
) )
>
> [Non-text portions of this message have been removed]
------- End of Original Message -------
**************Get trade secrets for amazing burgers. Watch
"Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2
<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod0003000000000
2>
)
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:palmettoe@aol.com?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyOTIwNXF1
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA2BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22606>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
bjg2Ym1jBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA2BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMTE2
MjI-> (36)
3.
Prop bolts sheared.
<http://groups.yahoo.com/group/jabiruengines/message/22588;_ylc=X3oDMTJ
y
dnNyZG5xBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Bill Evans" wwevans@enter-net.com
<mailto:wwevans@enter-net.com?Subject= Re%3AProp%20bolts%20sheared%2E>
bil438 <http://profiles.yahoo.com/bil438>
Wed Jun 4, 2008 6:54 am (PDT)
The only 6 bolt installation I can think of at the front of the
engine
would be the Prop bolts. As I see it the possibilities/
contributing
factors are:
1. Bogus bolts and or Bogus nuts. (I found one at Sun & Fun)
2. Bolt shanks nicked or damaged in service.
2. Improper torque/ Torque not checked (every 25 hours on wooden
props.)
I found one bolt at 5 ft lbs last time.
3. No Safety devices, ie no lockwire.
4. Prop bushings "climbed" into the wooden prop.
5 Steel bushings incorrectly installed.
6. Nuts bottomed on bolt shanks inducing failure.
I found 2 prop bolts with circumferential score marks after I
backed
them out with a ratchet. These marks would be eliminated if the
bolts
were driven straight in and straight out. Also the nuts should
be
torqued while the bolts held still.
However the 4 sheared bolts suggest that factors 1 and 6 are
more likely
causes.
One precaution is to determine the exact length needed and buy
your
bolts from the propeller maker.
Bill Evans
Back to top
Reply to sender
<mailto:wwevans@enter-net.com?Subject=Re%3AProp%20bolts%20sheared%2E>
|
Reply to group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3AProp%20bolts%20sheared%2E> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZGk0dG12
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22588>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22588;_ylc=X3oDMTM
3
NTJiZXUyBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI1
ODg-> (1)
4.
Re: Where are comments from Jabiru USA?
<http://groups.yahoo.com/group/jabiruengines/message/22589;_ylc=X3oDMTJ
y
aGFycWI0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject
Re%3A%20Where%20are%20comments%20from%20Jabiru%20USA%3F> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 10:09 am (PDT)
Anyone know where Pete from Jabiru USA is? Havent heard any
comments from him in a while. Some concerns of mine were also emailed to
Jabiru USA and have not gotten an answer. I wonder if he monitors the
jabiruengines group anymore?
Ivan
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Where%20are%20comments%20from%
2
0Jabiru%20USA%3F> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3A%20Where%20are%20comments%20from%20Jabiru%20USA%3F> | Reply via web
post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZWkyOWxx
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22589>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22589;_ylc=X3oDMTM
3
c3FkczZoBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI1
ODk-> (1)
5.
when? who? rebuilding the jab 2200 carburator??
<http://groups.yahoo.com/group/jabiruengines/message/22601;_ylc=X3oDMTJ
y
dmVoaDBzBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAxBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "bill shamblin" bshamblin2002@yahoo.com
<mailto:bshamblin2002@yahoo.com?Subject
Re%3Awhen%3F%20who%3F%20rebuilding%20the%20jab%202200%20carburator%3F%3F
> bshamblin2002 <http://profiles.yahoo.com/bshamblin2002>
Wed Jun 4, 2008 3:14 pm (PDT)
flyers,
ive started studying my jabiru/bing setup and wonder if the
carburator
should come off and be rebuilt at some point even if there are
no
problems?? ( i only have 45 hrs now. ) is this in the literature
somewhere?
what should be the timing of having the carb rebuilt?? months?
flight
hours? wait for trouble?
who might be specialized in doing a good job with this??
thanks,
bill s. in nc
Back to top
Reply to sender
<mailto:bshamblin2002@yahoo.com?Subject=Re%3Awhen%3F%20who%3F%20rebuild
i
ng%20the%20jab%202200%20carburator%3F%3F> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3Awhen%3F%20who%3F%20rebuilding%20the%20jab%202200%20carburator%3F%3F
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJybmF0bHZs
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jAxBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22601>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22601;_ylc=X3oDMTM
3
a3B1dXM0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjAxBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI2
MDE-> (1)
6.
Fw: ivan-POH weight / balance / IDE4/ ASI
<http://groups.yahoo.com/group/jabiruengines/message/22604;_ylc=X3oDMTJ
y
ZDBpYzRvBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA0BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI2NjQxNjU->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject
Re%3AFw%3A%20ivan-POH%20weight%20%2F%20balance%20%20%2F%20IDE4%2F%20%20A
SI> ivanbrauer <http://profiles.yahoo.com/ivanbrauer>
Wed Jun 4, 2008 6:38 pm (PDT)
Hi Pete, J-250 owners
I have three questions so I am combining them in this email:
1.
I noticed that the note that you sent with the new POH and also
table 4-3 states to use the appropriate values from the W/B record. I
noticed that many of the arms in the POH are also different. I am
assuming to always use the ARMS too that came with my actual W/B record
for my actual serial number airplane?
2.
I was changing the voltage alarm setting on the Grand Rapids EIS
and somehow goofed on something. I must have pressed some wrong button
after inputting my min volt of 12.4 in the Display 1 bank.
I came to a screen that went through Display on the right and
going from #1 to 11 on the left. I figured that I would just scroll
through and not change anything hoping to return to my default start up
page. Instead it kept on scrolling through settings ie: fuel flow, tach,
aux1........6, and IDE1, IDE2, IDE3, IDE4, etc. I mistakingly changed
the setting on the IDE4 I think one lower. I did not know for sure what
IDE4 was set at or what it was so I did not fool with it until I found
out.
Do you know what IDE4 should be set at and what it is?. It can
be found in the Display bank #2. Display #1 looks like it is the normal
settings which are shown on the efis in case of an alarm, ie voltage
min/max, CHT's, EGT's, Display #2 looked all Greek to me. If there is no
IDE4 maybe it is 1D4?
3.
Ever since I got my airplane I have had a difference in the
indicated airspeed readings of the UMA guage and the EFIS. It took me a
while to learn how the EFIS works so I did not make any ealier comments.
My steam guage reads consistently 4-6 KIAS less than the EFIS indicated
airspeed. I have been flying by the EFIS readings since the plane flies
well at that speed and I did not want to error by following the steam
guage and flying slow on final approach. It seems like when I am doing
slow flight the stall horn sounds about right @6 kts above stall speed
and I am not stalled. The steam guage indicates that I am about to stall
(the best I can tell.) Because of this I am assuming that the EFIS is
accurate and that the steam guage is off.
Does this assumption sound right to you? Any other ideas would
be welcome. I have learned to trust my EFIS because it is such a great
unit so I think the EFIS is probably right.
Also I am going to try flying upwind and down wind, adding the
indicated airspeeds, divide by 2 and see if this figure matches the GPS
EFIS groundspeed. I think this should tell which is accurate?
Thanks
Ivan
Ivan
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3AFw%3A%20ivan-POH%20weight%20%2F%2
0
balance%20%20%2F%20IDE4%2F%20%20ASI> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3AFw%3A%20ivan-POH%20weight%20%2F%20balance%20%20%2F%20IDE4%2F%20%20A
SI> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZWVuNDVk
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
jA0BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI2NjQxNjU-?act=reply&messageNu
m
=22604>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22604;_ylc=X3oDMTM
3
cm5qNDM3BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNjA0BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI2NjQxNjUEdHBjSWQDMjI2
MDQ-> (1)
Recent Activity
*
9
New Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJmNnY5a
m
QxBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dG
wEc2xrA3ZtYnJzBHN0aW1lAzEyMTI2NjQxNjU->
*
2
New Photos
<http://groups.yahoo.com/group/jabiruengines/spnew;_ylc=X3oDMTJmNXA0MHJ
k
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwE
c2xrA3ZwaG90BHN0aW1lAzEyMTI2NjQxNjU->
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJla3VxY25sBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwEc2xrA3
ZnaHAEc3RpbWUDMTIxMjY2NDE2NQ-->
Y! Sports for TV
Game Day Companion
<http://us.ard.yahoo.com/SIG=13ok1qhav/M=493064.12016236.12445728.997
769
3/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212671385/L=/B=japhAN
FJq2o-/J=12
evt=4
9017/*http://digitalhome.yahoo.com/sports>
Live fantasy league
& game stats on TV.
Yahoo! News
Fashion News
<http://us.ard.yahoo.com/SIG=13ornrbjp/M=493064.12016309.12445701.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212671385/L=/B=jqphAN
FJq2o-/J=12
12664185013982/A=3848621/R=0/SIG=12u6o6g3h/*http://news.yahoo.com/i
/1597
;_ylt=A9FJqa5Gxa5E2jgAYQKVEhkF;_ylu=X3oDMTA2MnU4czRtBHNlYwNzbg-->
What's the word on
fashion and style?
Yahoo! Finance
It's Now Personal
<http://us.ard.yahoo.com/SIG=13o50ckm4/M=493064.12016257.12445664.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212671385/L=/B=j6phAN
FJq2o-/J=12
evt=5
0284/*http://finance.yahoo.com/personal-finance>
Guides, news,
advice & more.
Need to Reply?
Click one of the "Reply" links to respond to a specific message in the
Daily Digest.
Create New Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJlMTNoZTZy
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA250cGMEc3RpbWUDMTIxMjY2NDE2NQ--> | Visit Your Group on the Web
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJjbzcyMzdlBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwBHN0aW1lAzEyMTI2NjQxNjU->
Messages
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJldnY2
M
2pjBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA21zZ3MEc3RpbWUDMTIxMjY2NDE2NQ--> | Files
<http://groups.yahoo.com/group/jabiruengines/files;_ylc=X3oDMTJmOHY5c2x
r
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2ZpbGVzBHN0aW1lAzEyMTI2NjQxNjU-> | Photos
<http://groups.yahoo.com/group/jabiruengines/photos;_ylc=X3oDMTJlOGk2M2
Z
oBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHI
Ec2xrA3Bob3QEc3RpbWUDMTIxMjY2NDE2NQ--> | Links
<http://groups.yahoo.com/group/jabiruengines/links;_ylc=X3oDMTJmaWdyczB
2
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2xpbmtzBHN0aW1lAzEyMTI2NjQxNjU-> | Database
<http://groups.yahoo.com/group/jabiruengines/database;_ylc=X3oDMTJjajVj
b
W51BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2RiBHN0aW1lAzEyMTI2NjQxNjU-> | Polls
<http://groups.yahoo.com/group/jabiruengines/polls;_ylc=X3oDMTJmb2tjbTJ
p
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA3BvbGxzBHN0aW1lAzEyMTI2NjQxNjU-> | Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJlYm1jM
W
44BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdH
IEc2xrA21icnMEc3RpbWUDMTIxMjY2NDE2NQ--> | Calendar
<http://groups.yahoo.com/group/jabiruengines/calendar;_ylc=X3oDMTJkNWw0
Z
DJuBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2NhbARzdGltZQMxMjEyNjY0MTY1>
MARKETPLACE
Blockbuster is giving away a free trial of Blockbuster Total Access to
smart movie lovers like you.
<http://us.ard.yahoo.com/SIG=13r3fqgq3/M=624381.12730922.13032918.108
355
68/D=groups/S=1705786083:MKP1/Y=YAHOO/EXP=1212671385/L=/B=jKp
hANFJq2o-/J
=1212664185013982/A=5368227/R=0/SIG=14evd63no/*http://media.adrev
olver.c
om/adrevolver/href?banner=189158&place=26143&url_=http://tc.deals.y
ahoo.
com/tc/blockbuster/display.com?cid=bbi00027>
<https://media.adrevolver.com/adrevolver/trace?adpath=11959>
Yahoo! Groups
<http://groups.yahoo.com/;_ylc=X3oDMTJkZjdiZ2M5BF9TAzk3MzU5NzE1BGdycElk
A
zI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMjEyN
jY0MTY1>
Change settings via the Web
<http://groups.yahoo.com/group/jabiruengines/join;_ylc=X3oDMTJmajQ4bzI4
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA3N0bmdzBHN0aW1lAzEyMTI2NjQxNjU-> (Yahoo! ID required)
Change settings via email: Switch delivery to Individual
<mailto:jabiruengines-normal@yahoogroups.com?subject=Email Delivery:
Indiviual Email> | Switch format to Traditional
<mailto:jabiruengines-traditional@yahoogroups.com?subject=Change
Delivery Format: Traditional>
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJkdnNubTU0BF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwZgRzdGltZQMxMjEyNjY0MTY1> | Yahoo! Groups Terms of Use
<http://docs.yahoo.com/info/terms/> | Unsubscribe
<mailto:jabiruengines-unsubscribe@yahoogroups.com?subject=Unsubscribe>
<http://geo.yahoo.com/serv?s=97359715/grpId=2772782/grpspId=1705786
083/m
sgId=3345/stime=1212664158/nc1=4767086/nc2=3848621/nc3=4507179>
X-MimeOLE: Produced By Microsoft Exchange V6.5
Received: from bp1xeuex002.bp1.ad.bp.com ([149.184.180.71]) by BP1XEUEX027-C.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Wed, 4 Jun 2008 11:07:20 +0100
MIME-Version: 1.0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Received: from bp1xeuex711.bp1.ad.bp.com ([149.182.218.242]) by bp1xeuex002.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Wed, 4 Jun 2008 11:07:19 +0100
Received: from bp1xeuav707.bp1.ad.bp.com ([149.182.218.238]) by bp1xeuex711.bp1.ad.bp.com
with Microsoft SMTPSVC(6.0.3790.3959); Wed, 4 Jun 2008 11:07:19 +0100
Received: from mail161.messagelabs.com ([216.82.253.115]) by bp1xeuav707.bp1.ad.bp.com
with InterScan Messaging Security Suite; Wed, 04 Jun 2008 11:07:18 +0100
Received: (qmail 1582 invoked from network); 4 Jun 2008 10:07:12 -0000
Received: from mta160.mail.ukl.yahoo.com (HELO mta160.mail.ukl.yahoo.com) (77.238.184.27)
by server-4.tower-161.messagelabs.com with SMTP; 4 Jun 2008 10:07:12
-0000
Received: from 69.147.64.102 (HELO n9c.bullet.sp1.yahoo.com) (69.147.64.102)
by mta160.mail.ukl.yahoo.com with SMTP; Wed, 04 Jun 2008 10:07:11 +0000
Received: from [216.252.122.217] by n9.bullet.sp1.yahoo.com with NNFMP; 04 Jun
2008 10:07:08 -0000
Received: from [209.73.164.86] by t2.bullet.sp1.yahoo.com with NNFMP; 04 Jun 2008
10:07:08 -0000
Received: from [66.218.67.114] by t8.bullet.scd.yahoo.com with NNFMP; 04 Jun 2008
10:07:08 -0000
Content-class: urn:content-classes:message
Subject: [jabiruengines] Digest Number 3344
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
Thread-Topic: [jabiruengines] Digest Number 3344
Thread-Index: AcjGKsfz9WsVDUu6QL6qsNfaK5uBwQ=
List-Unsubscribe: <mailto:jabiruengines-unsubscribe@yahoogroups.com>
From: <jabiruengines@yahoogroups.com>
jabiru engines
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJkaDg4YXU3BF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNoZHIEc2xrA2
hwaARzdGltZQMxMjEyNTc0MDI3>
Messages In This Digest (7 Messages)
1.
250 Free Books for Members From: karen.hall35
2a.
Rocky Mountain Tandem Wing Fly-In, 6/6/2008, 9:00 am From:
jabiruengines@yahoogroups.com
2b.
Re: Rocky Mountain Tandem Wing Fly-In, 6/6/2008, 9:00 am From:
n02ez
3.
RPM From: Garth Knowles
4a.
Prop Hub From: Tom Covell
4b.
Re: Prop Hub From: Ivan
4c.
Re: Prop Hub From: John Lamb
View All Topics
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJmcHBi
Y
2ZhBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkb
XNnBHNsawNhdHBjBHN0aW1lAzEyMTI1NzQwMjc-?xm=1&m=p&tidx=1> | Create
New
Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJmcjEwMnVh
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNkbXNnB
HNsawNudHBjBHN0aW1lAzEyMTI1NzQwMjc->
Messages
1.
250 Free Books for Members
<http://groups.yahoo.com/group/jabiruengines/message/22578;_ylc=X3oDMTJ
y
aHJmYzVvBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTc4BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "karen.hall35" karen.hall35@yahoo.com
<mailto:karen.hall35@yahoo.com?Subject
Re%3A250%20Free%20Books%20for%20Members> karen.hall35
<http://profiles.yahoo.com/karen.hall35>
Tue Jun 3, 2008 2:53 am (PDT)
Dear Members
I was sent this fantastic 100% free link by a friend, so I
thought I would
share it with the group...enjoy!
Collect over 250 free books by visiting the link below. They are
all
INSTANTLY downloadable and there are No Catches!
There are so many titles to choose from including fiction,
crafts, health &
fitness, business and so many more!
http://moourl.com/250freebooks <http://moourl.com/250freebooks>
When you have had your freebies, be nice to your family and
friends and
pass it forward, like I did!
Take care and have a great week
Back to top
Reply to sender
<mailto:karen.hall35@yahoo.com?Subject=Re%3A250%20Free%20Books%20for%20
M
embers> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3A250%20Free%20Books%20for%20Members> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJybWtoYWpm
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tc4BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22578>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22578;_ylc=X3oDMTM
3
MGl2MGlsBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTc4BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMjI1
Nzg-> (1)
2a.
Rocky Mountain Tandem Wing Fly-In, 6/6/2008, 9:00 am
<http://groups.yahoo.com/group/jabiruengines/message/22579;_ylc=X3oDMTJ
y
ZTE3YzRtBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTc5BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "jabiruengines@yahoogroups.com"
jabiruengines@yahoogroups.com
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3ARocky%20Mountain%20Tandem%20Wing%20Fly-In%2C%206%2F6%2F2008%2C%209%
3A00%20am%20>
Tue Jun 3, 2008 5:56 am (PDT)
Reminder from: jabiruengines Yahoo! Group
http://groups.yahoo.com/group/jabiruengines/cal
<http://groups.yahoo.com/group/jabiruengines/cal>
Rocky Mountain Tandem Wing Fly-In
Friday June 6, 2008
9:00 am - 10:00 am
Location: KCPR Casper, Wy
Notes:
Friday, Saturday, and Sunday
All Rights Reserved
Copyright =A9 2008
Yahoo! Inc.
http://www.yahoo.com <http://www.yahoo.com>
Privacy Policy:
http://privacy.yahoo.com/privacy/us
<http://privacy.yahoo.com/privacy/us>
Terms of Service:
http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
Back to top
Reply to sender
<mailto:jabiruengines@yahoogroups.com?Subject=Re%3ARocky%20Mountain%20T
a
ndem%20Wing%20Fly-In%2C%206%2F6%2F2008%2C%209%3A00%20am%20> | Reply to
group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3ARocky%20Mountain%20Tandem%20Wing%20Fly-In%2C%206%2F6%2F2008%2C%209%
3A00%20am%20> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJybm12YXY5
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tc5BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22579>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22539;_ylc=X3oDMTM
3
Y2FqZWsxBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTc5BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMjI1
Mzk-> (3)
2b.
Re: Rocky Mountain Tandem Wing Fly-In, 6/6/2008, 9:00 am
<http://groups.yahoo.com/group/jabiruengines/message/22581;_ylc=X3oDMTJ
y
ZTh2NWdmBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgxBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "n02ez" Reggie@hdwireless.net
<mailto:Reggie@hdwireless.net?Subject
Re%3A%20Rocky%20Mountain%20Tandem%20Wing%20Fly-In%2C%206%2F6%2F2008%2C%2
09%3A00%20am> n02ez <http://profiles.yahoo.com/n02ez>
Tue Jun 3, 2008 1:31 pm (PDT)
>
> Reminder from: jabiruengines Yahoo! Group
> http://groups.yahoo.com/group/jabiruengines/cal
<http://groups.yahoo.com/group/jabiruengines/cal>
>
> Rocky Mountain Tandem Wing Fly-In
> Friday June 6, 2008
> 9:00 am - 10:00 am
> Location: KCPR Casper, Wy
>*******************************************
Re: Rocky Mountain Tandem Wing Fly-in
(http://groups.yahoo.com/group/Dragonflylist/message/19724
<http://groups.yahoo.com/group/Dragonflylist/message/19724> )
Well, it is moot now but the fly-in was planned for next weekend
here
in Casper, WY. The next fly-in planned as far as I know for the
Dragonflies and Quickie's will be in KS it is the main event for
these
airplanes. Check out last years website at
http://www.tandemwing.com/fodfly-in.htm
<http://www.tandemwing.com/fodfly-in.htm>
I am not sure that Spud has finalised the dates for this year.
Spud,
if you are on the list how about an update?
Paul
Back to top
Reply to sender
<mailto:Reggie@hdwireless.net?Subject=Re%3A%20Rocky%20Mountain%20Tandem
%
20Wing%20Fly-In%2C%206%2F6%2F2008%2C%209%3A00%20am> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject
Re%3A%20Rocky%20Mountain%20Tandem%20Wing%20Fly-In%2C%206%2F6%2F2008%2C%2
09%3A00%20am> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyZmxpbTlw
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TgxBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22581>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22539;_ylc=X3oDMTM
3
aWNwdjNoBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgxBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMjI1
Mzk-> (3)
3.
RPM
<http://groups.yahoo.com/group/jabiruengines/message/22580;_ylc=X3oDMTJ
y
NG4wdHNrBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgwBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "Garth Knowles" garthknowles@yahoo.com
<mailto:garthknowles@yahoo.com?Subject= Re%3ARPM> garthknowles
<http://profiles.yahoo.com/garthknowles>
Tue Jun 3, 2008 8:01 am (PDT)
In my 3300 installation manual (hydraulic lifter model), in
Section 15
Propeller Selection, it says "do not cruise or climb in the
range of
2100 - 2400 rpm". I can see that climb should be at or close to
full
power, but what is the issue with cruise at this power setting?
Is
this common for any engine or unique to the Jab? Thx Garth
Back to top
Reply to sender <mailto:garthknowles@yahoo.com?Subject=Re%3ARPM>
| Reply to group <mailto:jabiruengines@yahoogroups.com?Subject
Re%3ARPM> | Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyMDcwcmZq
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TgwBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22580>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/22580;_ylc=X3oDMTM
3
amFxNTZwBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgwBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMjI1
ODA-> (1)
4a.
Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22582;_ylc=X3oDMTJ
y
YmRtZTFuBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgyBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "Tom Covell" tomcovell@theriver.com
<mailto:tomcovell@theriver.com?Subject= Re%3AProp%20Hub>
desertfloats
<http://profiles.yahoo.com/desertfloats>
Tue Jun 3, 2008 7:01 pm (PDT)
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
Back to top
Reply to sender
<mailto:tomcovell@theriver.com?Subject=Re%3AProp%20Hub> | Reply to
group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3AProp%20Hub> |
Reply
via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyYnNlbTQ3
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TgyBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22582>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
OGw5bDluBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgyBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMTE2
MjI-> (20)
4b.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22583;_ylc=X3oDMTJ
y
aTdvYXFlBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgzBHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "Ivan" imap8ntr@cox.net
<mailto:imap8ntr@cox.net?Subject= Re%3A%20Prop%20Hub> ivanbrauer
<http://profiles.yahoo.com/ivanbrauer>
Tue Jun 3, 2008 9:00 pm (PDT)
On what kind of airplane was the installation and what kind of
prop?
Ivan
----- Original Message -----
From: Tom Covell
To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
Sent: Tuesday, June 03, 2008 7:01 PM
Subject: [jabiruengines] Prop Hub
We had a prop hub come off of a 3300. Preliminary info is that 4
of
the bolts were sheared and two were pulled out of the
crankshaft. I
understand that Jabiru engineers are looking at it tomorrow.
Lots of
speculation including proper Loc-tite (blue?) and proper torque.
Might check yours.
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:imap8ntr@cox.net?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyNHNvbmJ0
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
TgzBHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22583>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
OW84OGVjBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTgzBHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMTE2
MjI-> (20)
4c.
Re: Prop Hub
<http://groups.yahoo.com/group/jabiruengines/message/22584;_ylc=X3oDMTJ
y
dTdqYXVqBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg0BHNlYwNkbXNnBHNsawN2bXNnBHN0aW1lAzEyMTI1NzQwMjc->
Posted by: "John Lamb" jlamb@tpg.com.au
<mailto:jlamb@tpg.com.au?Subject= Re%3A%20Prop%20Hub> zzjlamb
<http://profiles.yahoo.com/zzjlamb>
Wed Jun 4, 2008 12:56 am (PDT)
And was it the hub of the prop coming off the flange, or the
flange
coming off the crankshaft?
I assume from the reference to Loctite that it was the latter.
Were
the nuts lock wired?
John Lamb
On 04/06/2008, at 2:00 PM, Ivan wrote:
> On what kind of airplane was the installation and what kind of
prop?
> Ivan
>
> ----- Original Message -----
> From: Tom Covell
> To: jabiruengines@yahoogroups.com
<mailto:jabiruengines%40yahoogroups.com>
> Sent: Tuesday, June 03, 2008 7:01 PM
> Subject: [jabiruengines] Prop Hub
>
> We had a prop hub come off of a 3300. Preliminary info is that
4 of
> the bolts were sheared and two were pulled out of the
crankshaft. I
> understand that Jabiru engineers are looking at it tomorrow.
Lots of
> speculation including proper Loc-tite (blue?) and proper
torque.
> Might check yours.
>
> [Non-text portions of this message have been removed]
>
>
>
[Non-text portions of this message have been removed]
Back to top
Reply to sender
<mailto:jlamb@tpg.com.au?Subject=Re%3A%20Prop%20Hub> | Reply to group
<mailto:jabiruengines@yahoogroups.com?Subject= Re%3A%20Prop%20Hub> |
Reply via web post
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJyaXVrZTlx
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1zZ0lkAzIyN
Tg0BHNlYwNkbXNnBHNsawNycGx5BHN0aW1lAzEyMTI1NzQwMjc-?act=reply&messageNu
m
=22584>
Messages in this topic
<http://groups.yahoo.com/group/jabiruengines/message/11622;_ylc=X3oDMTM
3
dGU1a2M5BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBG1z
Z0lkAzIyNTg0BHNlYwNkbXNnBHNsawN2dHBjBHN0aW1lAzEyMTI1NzQwMjcEdHBjSWQDMTE2
MjI-> (20)
Recent Activity
*
9
New Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJmOHYxZ
W
E5BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dG
wEc2xrA3ZtYnJzBHN0aW1lAzEyMTI1NzQwMjc->
*
2
New Photos
<http://groups.yahoo.com/group/jabiruengines/spnew;_ylc=X3oDMTJmYWlydjh
z
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwE
c2xrA3ZwaG90BHN0aW1lAzEyMTI1NzQwMjc->
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJlb2xkMDJzBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwN2dGwEc2xrA3
ZnaHAEc3RpbWUDMTIxMjU3NDAyNw-->
Y! Sports for TV
Access it for free
<http://us.ard.yahoo.com/SIG=13ompdees/M=493064.12016236.12445728.997
769
3/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212581228/L=/B=_wRvAE
LaX.4-/J=12
evt=4
9021/*http://digitalhome.yahoo.com/sports>
Get Fantasy Sports
stats on your TV.
Yahoo! News
Odd News
<http://us.ard.yahoo.com/SIG=13ooo0dot/M=493064.12016309.12445701.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212581228/L=/B=AAVvAE
LaX.4-/J=12
12574028499969/A=3848614/R=0/SIG=12t4qk00m/*http://news.yahoo.com/i
/757;
_ylt=A9FJqYzfwK5EFCQAswis0NUE;_ylu=X3oDMTA3NW1oMDRpBHNlYwM3NTc->
You won't believe
it, but it's true
Yahoo! Finance
It's Now Personal
<http://us.ard.yahoo.com/SIG=13o0tg0pl/M=493064.12016257.12445664.867
457
8/D=groups/S=1705786083:NC/Y=YAHOO/EXP=1212581228/L=/B=AQVvAE
LaX.4-/J=12
evt=5
0284/*http://finance.yahoo.com/personal-finance>
Guides, news,
advice & more.
Need to Reply?
Click one of the "Reply" links to respond to a specific message in the
Daily Digest.
Create New Topic
<http://groups.yahoo.com/group/jabiruengines/post;_ylc=X3oDMTJlNmRja3B1
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA250cGMEc3RpbWUDMTIxMjU3NDAyNw--> | Visit Your Group on the Web
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJjNzNkbjlhBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwBHN0aW1lAzEyMTI1NzQwMjc->
Messages
<http://groups.yahoo.com/group/jabiruengines/messages;_ylc=X3oDMTJldWth
O
HM0BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA21zZ3MEc3RpbWUDMTIxMjU3NDAyNw--> | Files
<http://groups.yahoo.com/group/jabiruengines/files;_ylc=X3oDMTJmbW5uZmI
z
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2ZpbGVzBHN0aW1lAzEyMTI1NzQwMjc-> | Photos
<http://groups.yahoo.com/group/jabiruengines/photos;_ylc=X3oDMTJlNTdnYm
w
2BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHI
Ec2xrA3Bob3QEc3RpbWUDMTIxMjU3NDAyNw--> | Links
<http://groups.yahoo.com/group/jabiruengines/links;_ylc=X3oDMTJmNmxwaTJ
0
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA2xpbmtzBHN0aW1lAzEyMTI1NzQwMjc-> | Database
<http://groups.yahoo.com/group/jabiruengines/database;_ylc=X3oDMTJjdDdm
c
3NxBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2RiBHN0aW1lAzEyMTI1NzQwMjc-> | Polls
<http://groups.yahoo.com/group/jabiruengines/polls;_ylc=X3oDMTJmZWpjM2t
2
BF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIE
c2xrA3BvbGxzBHN0aW1lAzEyMTI1NzQwMjc-> | Members
<http://groups.yahoo.com/group/jabiruengines/members;_ylc=X3oDMTJlMDR0N
n
BuBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdH
IEc2xrA21icnMEc3RpbWUDMTIxMjU3NDAyNw--> | Calendar
<http://groups.yahoo.com/group/jabiruengines/calendar;_ylc=X3oDMTJkcnFt
c
WNvBF9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmd
HIEc2xrA2NhbARzdGltZQMxMjEyNTc0MDI3>
MARKETPLACE
Blockbuster is giving away a free trial of Blockbuster Total Access to
smart movie lovers like you.
<http://us.ard.yahoo.com/SIG=13r6j3uhm/M=624381.12730922.13032918.108
355
68/D=groups/S=1705786083:MKP1/Y=YAHOO/EXP=1212581228/L=/B=_gR
vAELaX.4-/J
=1212574028499969/A=5368227/R=0/SIG=14evd63no/*http://media.adrev
olver.c
om/adrevolver/href?banner=189158&place=26143&url_=http://tc.deals.y
ahoo.
com/tc/blockbuster/display.com?cid=bbi00027>
Yahoo! Groups
<http://groups.yahoo.com/;_ylc=X3oDMTJkYmQwZ3JnBF9TAzk3MzU5NzE1BGdycElk
A
zI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2dmcARzdGltZQMxMjEyN
Tc0MDI3>
Change settings via the Web
<http://groups.yahoo.com/group/jabiruengines/join;_ylc=X3oDMTJmM3Z1aGhw
B
F9TAzk3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc
2xrA3N0bmdzBHN0aW1lAzEyMTI1NzQwMjc-> (Yahoo! ID required)
Change settings via email: Switch delivery to Individual
<mailto:jabiruengines-normal@yahoogroups.com?subject=Email Delivery:
Indiviual Email> | Switch format to Traditional
<mailto:jabiruengines-traditional@yahoogroups.com?subject=Change
Delivery Format: Traditional>
Visit Your Group
<http://groups.yahoo.com/group/jabiruengines;_ylc=X3oDMTJka2dzNGFhBF9TA
z
k3MzU5NzE1BGdycElkAzI3NzI3ODIEZ3Jwc3BJZAMxNzA1Nzg2MDgzBHNlYwNmdHIEc2xrA2
hwZgRzdGltZQMxMjEyNTc0MDI3> | Yahoo! Groups Terms of Use
<http://docs.yahoo.com/info/terms/> | Unsubscribe
<mailto:jabiruengines-unsubscribe@yahoogroups.com?subject=Unsubscribe>
<http://geo.yahoo.com/serv?s=97359715/grpId=2772782/grpspId=1705786
083/m
sgId=3344/stime=1212574027/nc1=4767085/nc2=3848614/nc3=4507179>
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: June Lightning Newsletter |
In a message dated 6/5/2008 9:16:30 P.M. Eastern Daylight Time,
dashvii@hotmail.com writes:
It's too quiet on here.
Hi Brain,
Thanks for the kind words on the newsletters. Those bits of
encouragement from our readers are what make me stay up late into the night working
on
the next issue to try to provide an interesting, informative, and entertaining
newsletter. Sometimes the ideas and words flow as quickly as jet fuel
through an F-4's J-79 in full afterburner, but at other times, I can't seem to
think of a thing to say. That is when inputs from our Lightning flyers,
builders, and newsletter readers are so important.
And yes, it has been too quiet on the list recently. My guess is that
most of us are still in shock after hearing about the tragic loss of our good
friend and fellow Lightning enthusiast, Jerry Van Heeswyk. Most of us that
have been in aviation for any time at all have probably been through this type
of sad event before. It is sometimes hard to understand the "why", but we
can often take comfort in the fact that as we continue enjoying our common
love of the "Lightning" and sharing information about it, we are doing exactly
what Jerry would want us to do.
Having said that, lets keep the flow of information "turned on".
Lightning flyers, builders, and all on the list, all of you have something to
share
with the rest of the group, so send an email to the list or directly to me
for the newsletter. Your information, and your willingness to share it, is
what makes the newsletter informative and interesting.
As to an update on the Arizona accident, I am sure that Arion will soon
be able to provide some information and facts. However, remember that the
NTSB and FAA are responsible for the investigation and their final report will
take some time to complete. Until then, any speculation as to "what and how"
would not be in the best interest of all involved.
Blue skies and "nunc est bibendum."
Buz
**************Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: June Lightning Newsletter |
Always the case with a somber mood...
On 6/6/08, N1BZRich@aol.com <N1BZRich@aol.com> wrote:
>
> In a message dated 6/5/2008 9:16:30 P.M. Eastern Daylight Time,
> dashvii@hotmail.com writes:
>
> It's too quiet on here.
>
> Hi Brain,
> Thanks for the kind words on the newsletters. Those bits of
> encouragement from our readers are what make me stay up late into the night
> working on the next issue to try to provide an interesting, informative, and
> entertaining newsletter. Sometimes the ideas and words flow as quickly as
> jet fuel through an F-4's J-79 in full afterburner, but at other times, I
> can't seem to think of a thing to say. That is when inputs from our
> Lightning flyers, builders, and newsletter readers are so important.
> And yes, it has been too quiet on the list recently. My guess is that
> most of us are still in shock after hearing about the tragic loss of our
> good friend and fellow Lightning enthusiast, Jerry Van Heeswyk. Most of us
> that have been in aviation for any time at all have probably been through
> this type of sad event before. It is sometimes hard to understand the
> "why", but we can often take comfort in the fact that as we continue
> enjoying our common love of the "Lightning" and sharing information about
> it, we are doing exactly what Jerry would want us to do.
> Having said that, lets keep the flow of information "turned on".
> Lightning flyers, builders, and all on the list, all of you have something
> to share with the rest of the group, so send an email to the list or
> directly to me for the newsletter. Your information, and your willingness
> to share it, is what makes the newsletter informative and interesting.
> As to an update on the Arizona accident, I am sure that Arion will soon
> be able to provide some information and facts. However, remember that the
> NTSB and FAA are responsible for the investigation and their final report
> will take some time to complete. Until then, any speculation as to "what
> and how" would not be in the best interest of all involved.
> Blue skies and *"nunc est bibendum."*
> Buz
>
>
> ------------------------------
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence"
> on AOL Food<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002>
> .
>
> *
>
> *
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fatal Lightning Aircraft Crash |
In a message dated 6/6/2008 10:31:36 A.M. Eastern Daylight Time,
jhausch@charter.net writes:
Respectfully, when might we get some add'l news on this unfortunate
accident?
I'm sympathetic about your interest, but it prompts my problem-solving
inclination. In my opinion the accident breaks down into two parts.
1) The prop went away in flight but was recovered whole. that means the
prop flange to engine components failed for some reason.....metal fatigue, bad
bolts, or loose bolts. I am betting on loose or bad bolts....since no other
Jabs have lost the prop. Even when Nick hit the turkey vulture in flight
with the prop, splintering it into toothpicks, the flange was fine and is still
flying.
We will likely get some definitive statement in the coming months, but
it is safe to say that checking the prop to engine attachment by wiggling the
prop is a must before flights, in my opinion. I am suggesting a careful
wiggle in the 12 oclock and also in the 9 oclock position. It shouldn't wiggle
at all, but be sure it is not the engine mounts. Might not be a bad idea to
check the torque on the flange bolts soon.
I dont expect much more on that subject until the metallurgical data
comes in.
2) The second issue is the piloting after the prop went away. It think is a
reasonable conclusion that there was some loss of control with a resulting
impact. Whatever the details, I think the lesson to all of us is to practice
emergency procedures and to always have a plan to land when flying below
2,000 feet agl.
I observe that the Lightning is a "step-up" airplane for a good portion of
the builders and requires more attention than their previous birds. Things
happen faster. People want responsive controls, but that responsiveness
means you get into trouble much faster, particularly if destracted. I see panels
getting cluttered with lots of information-giving instruments. Perhaps the
first emergency procedure if you are less than 2,000 feet agl should be to
shut off the Master Switch!!!! That would focus attention on flying and
landing rather than the panel! Of course it would also mean you should wire
your flaps (and boost pump) directly to the battery, since not using flaps on
landing has also contributed to accidents.
My real point is that having sound emergency procedures that focus on flying
the plane is important and must be practiced. On my first flight in a
Lightning, to get the feel of the plane, I did a simulated approach and takeoff
at
a paved runway and had the engine quit at about 500 feet just after I passed
the end of the runway. While thinking about wether to land in the trees or
the Potomac River, " I hit the boost pump and changed tanks. I had
practiced that response previously, so it was automatic. Thankfully the engine
started running normally again and I went to my home field and landed. My
practicing paid off.
The actions of our departed colleague may be discussed at length as more is
known; however, the admonition will be the same. 1) Fly the plane first
.2)practice flying the plane first 3)plan to land when the engine quits 4) dont
make turns if possible.
I suppose I am a bit of an idealist, but I think we honor the memory of a
person by using their life as a lesson and admonition. My suggestion is
that we adjust our flying behaviors and train ourselves to handle similar
emergencies as an offering of honor.... that is something we can do right now.
I have a feeling that more details about the pilots actions will not change
the conclusions we might make.
Doug Koenigsberg
**************Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lightning crosswind ability |
What is a reasonable maximum crosswind component for a Lightning?
What have pilots successfully landed in? Would you do it again, or
did the experience bring new meaning to the term "personal limits" ?
What's a reasonable crosswind component for a pilot with recent
crosswind experience?
Is anyone willing to mention or propose the equivalent of "maximum
demonstrated crosswind component" ?
Hugh Sontag
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
In a message dated 6/6/2008 12:02:09 P.M. Eastern Daylight Time,
Kayberg@AOL.COM writes:
My real point is that having sound emergency procedures that focus on flyin
g
the plane is important and must be practiced.
Right on Doug, in fact that is exactly what the Lightning Flight Manual say
s
in section 3, Emergency Procedures (see below).
Blue Skies,
Buz
NOTE
In any emergency situation the most important initial actions are:
=B7 First - Maintain aircraft control
=B7 Then - Analyze the situation then take appropriate action
=B7 Land as soon as practicable.
In other words: Do not forget to FLY THE AIRCRAFT.
**************Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning crosswind ability |
In a message dated 6/6/2008 12:47:35 PM Eastern Daylight Time,
flying@qdea.com writes:
> What is a reasonable maximum crosswind component for a Lightning?
>
Hugh,
I have several landings and TOs with a 15K cross wind component on a dry
runway. Two persons aboard at close to max gross, the aircraft could handle more
crosswind.
However, on a wet runway and at lighter weights, I have had the aircraft skid
sideways.
On nice wide runways this isn't a problem, although a bit disconcerting.
Since I usually fly solo, I would prefer less camber that is provided to reduce
this tendency. I discussed this with Nick, and Arion's position is that the
camber is set for max gross weight. Nick may want to respond on this point.
Simple answer: At least 15 K on a dry runway at heavier weights. At lighter
weights and on wet or narrow runways, do be careful.
Personal experience, not be be taken as gospel. Your mileage may vary.
Earl Freguson
N17EF
**************
Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&
NCID=aolfod00030000000002)
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning crosswind ability |
In a message dated 6/6/2008 12:47:35 P.M. Eastern Daylight Time,
flying@qdea.com writes:
What is a reasonable maximum crosswind component for a Lightning?
What have pilots successfully landed in? Would you do it again, or
did the experience bring new meaning to the term "personal limits" ?
What's a reasonable crosswind component for a pilot with recent
crosswind experience?
Is anyone willing to mention or propose the equivalent of "maximum
demonstrated crosswind component" ?
Hugh,
Not sure what you mean by that last statement, but here are some
"answers" to your other questions.
I am pretty sure that Nick currently uses 15 knots as the max demonstrated
crosswind for the Lightning. He and I have both landed the Lightning in
"somewhat" more. The most I have had to deal with was a direct 17 gusting to
the
high twenties. The runway was long and wide and the Lightning handled it
well. Actually I was flying Linda's Lightning on its third flight and the
"weather changed" - so to speak.
As to "what is reasonable crosswind component for a pilot with recent
crosswind experience" the answer is it depends. It depends not only on the
pilot recent experience but also depends on the following:
-what kind of airplane was that recent experience in?
-what was the recent cross component that the pilot handled?
-is the cross wind steady or gusting?
-how wide (and long is the runway)?
-is the runway dry?
-have you practiced landings with less than normal flaps (30 degrees)
recently? (stall speed will vary with flaps used and aircraft weight at the time
of landing. The lower the stall speed the more cross control you will need to
use to counter the x-wind. The Lightning has sufficient control to handle
more than the 15 knots if the pilot has the recent experience and proficiency)
-is there a divert airport with a runway more into the wind?
You may be able to think of other variables as well, but you get the point.
Flying is a process of continually making decisions. The more experience
and data points you have in your "bag of tricks" the better off you are. In
fact, I am sure that is why you posed the question - more info for your "bag of
tricks".
Blue Skies,
Buz
**************Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning crosswind ability |
Earl; how would you compare the rudder authority of the lightning say,
compared to a 172?
On 6/6/08, EAFerguson@aol.com <EAFerguson@aol.com> wrote:
>
> In a message dated 6/6/2008 12:47:35 PM Eastern Daylight Time,
> flying@qdea.com writes:
>
> What is a reasonable maximum crosswind component for a Lightning?
>
>
> Hugh,
>
> I have several landings and TOs with a 15K cross wind component on a dry
> runway. Two persons aboard at close to max gross, the aircraft could handle
> more crosswind.
>
> However, on a wet runway and at lighter weights, I have had the aircraft
> skid sideways.
> On nice wide runways this isn't a problem, although a bit disconcerting.
> Since I usually fly solo, I would prefer less camber that is provided to
> reduce this tendency. I discussed this with Nick, and Arion's position is
> that the camber is set for max gross weight. Nick may want to respond on
> this point.
>
> Simple answer: At least 15 K on a dry runway at heavier weights. At lighter
> weights and on wet or narrow runways, do be careful.
>
> Personal experience, not be be taken as gospel. Your mileage may vary.
>
> Earl Freguson
> N17EF
>
>
> **************
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence"
> on AOL Food.
> (http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
>
> *
>
> *
>
>
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
I understand everyone wanting to know everything about the crash, why
and how. That answer will most likely take months. Normally NTSB would
not investigate the accident since it is an experimental aircraft.
However, they are. This is good for us, as they will inspect and test
each possible area and when completed report. The preliminary copy is
below. http://www.ntsb.gov/ntsb/query.asp Please note that as with all
first reports, much of the information can be wrong. Initial information
is often from non-aviation observers. As for what went wrong Lightning
or other manufacturers would be involved in aiding the investigation if
requested and they volunteered to do so. If they aid in the
investigation they will not be allowed to discuss anything to anyone
other then the investigating team. Until the investigation is closed,
only NTSB can release information. If they find a major problem that
effects safety of flight of all similar equipment, normally, a notice
could proceed a completed report.
Please don't guess. For all those that knew Jerry, flew and worked
along side of him and were with him before and after the crash, your
guess and thoughts on what happened and what he did after the prop left
the aircraft is tearing us apart. It will come out in the report. I
will say this, when wondering why he as a pilot did or did not react, WE
DO NOT KNOW. In combat my aircraft was hit and the explosion blew off
the front of the aircraft. The aircraft could still fly. However, it
started falling out of control. My copilot/gunner took over and saved us
because on my lack of ability to react and fly. My excuse was I had a
bullet logged in my spine and could not react. During any incident when
things come off or break they do collateral damage. I DO NOT KNOW IF
THIS HAPPENED TO JERRY. Please back off and save the "what ifs" till we
know all the facts.
As for checking the torque on the flange to crankshaft, DO IT BY THE
BOOK ONLY. If you followed the Jabiru manual, when assembling the
aircraft you should be ok. If you check the torque, then go by the
book. I have an electronic torque tester that must be used for this
operation. If you move the bolt, and you will, you must remove and
reinstall per the Jabriu instruction since you just destroyed the
sealant. Use only the prescribed sealant but check for new any sealants
recommended.
It would be best for all of us to wait for Arion to tell us what to do.
Ok to question ourselves, but please stop there. Some of us are very
sensitive due to loosing a good friend.
Johnny Thompson
NTSB Identification: SEA08LA149
14 CFR Part 91: General Aviation
Accident occurred Sunday, June 01, 2008 in Marana, AZ
Aircraft: Van Heeswyk Lightning, registration: N62JV
Injuries: 1 Fatal.
This is preliminary information, subject to change, and may contain
errors. Any errors in this report will be corrected when the final
report has been completed.
On June 1, 2008 about 0816 mountain standard time, an amateur built Van
Heeswyk Lightning airplane, N62JV, registered to and operated by the
pilot, was substantially damaged when it impacted terrain while
maneuvering near Marana, Arizona. The private pilot, who was the sole
occupant of the airplane, was killed. Visual meteorological conditions
prevailed and no flight plan was filed for the personal local flight
that was operated under the provisions of Title 14 Code of Federal
Regulations (CFR) Part 91. The flight departed from Ryan Field Airport,
Tucson, Arizona, about 0559.
Witnesses located adjacent to the accident site reported observing the
propeller assembly separate from the airplane as it flew over their
position. One witness stated that after the propeller separated, the
airplane pitched upwards and subsequently descended into terrain.
Another witness reported hearing the "engine rev up" just prior to the
airplane impacting the ground.
Examination of the airplane by a Federal Aviation Administration (FAA)
inspector revealed that the airplane came to rest in an upright position
within an open field. The fuselage was partially separated aft of the
cabin. All primary flight controls were located within the accident
site. The propeller assembly and propeller flange extension were found
separated from the engine and were located about .62 miles southwest of
the accident site. The wreckage was recovered to a secure location for
further examination
----- Original Message -----
From: Kayberg@AOL.COM
To: lightning-list@matronics.com
Sent: Friday, June 06, 2008 8:57 AM
Subject: Lightning-List: Fatal Lightning Aircraft Crash
In a message dated 6/6/2008 10:31:36 A.M. Eastern Daylight Time,
jhausch@charter.net writes:
Respectfully, when might we get some add'l news on this unfortunate
accident?
I'm sympathetic about your interest, but it prompts my problem-solving
inclination. In my opinion the accident breaks down into two parts.
1) The prop went away in flight but was recovered whole. that means
the prop flange to engine components failed for some reason.....metal
fatigue, bad bolts, or loose bolts. I am betting on loose or bad
bolts....since no other Jabs have lost the prop. Even when Nick hit the
turkey vulture in flight with the prop, splintering it into toothpicks,
the flange was fine and is still flying.
We will likely get some definitive statement in the coming months,
but it is safe to say that checking the prop to engine attachment by
wiggling the prop is a must before flights, in my opinion. I am
suggesting a careful wiggle in the 12 oclock and also in the 9 oclock
position. It shouldn't wiggle at all, but be sure it is not the engine
mounts. Might not be a bad idea to check the torque on the flange bolts
soon.
I dont expect much more on that subject until the metallurgical
data comes in.
2) The second issue is the piloting after the prop went away. It
think is a reasonable conclusion that there was some loss of control
with a resulting impact. Whatever the details, I think the lesson to
all of us is to practice emergency procedures and to always have a plan
to land when flying below 2,000 feet agl.
I observe that the Lightning is a "step-up" airplane for a good
portion of the builders and requires more attention than their previous
birds. Things happen faster. People want responsive controls, but
that responsiveness means you get into trouble much faster,
particularly if destracted. I see panels getting cluttered with lots of
information-giving instruments. Perhaps the first emergency procedure
if you are less than 2,000 feet agl should be to shut off the Master
Switch!!!! That would focus attention on flying and landing rather
than the panel! Of course it would also mean you should wire your
flaps (and boost pump) directly to the battery, since not using flaps on
landing has also contributed to accidents.
My real point is that having sound emergency procedures that focus on
flying the plane is important and must be practiced. On my first flight
in a Lightning, to get the feel of the plane, I did a simulated approach
and takeoff at a paved runway and had the engine quit at about 500 feet
just after I passed the end of the runway. While thinking about wether
to land in the trees or the Potomac River, " I hit the boost pump and
changed tanks. I had practiced that response previously, so it was
automatic. Thankfully the engine started running normally again and I
went to my home field and landed. My practicing paid off.
The actions of our departed colleague may be discussed at length as
more is known; however, the admonition will be the same. 1) Fly the
plane first .2)practice flying the plane first 3)plan to land when the
engine quits 4) dont make turns if possible.
I suppose I am a bit of an idealist, but I think we honor the memory
of a person by using their life as a lesson and admonition. My
suggestion is that we adjust our flying behaviors and train ourselves to
handle similar emergencies as an offering of honor.... that is something
we can do right now.
I have a feeling that more details about the pilots actions will not
change the conclusions we might make.
Doug Koenigsberg
-------------------------------------------------------------------------
-----
Get trade secrets for amazing burgers. Watch "Cooking with Tyler
Florence" on AOL Food.
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Very well said Johnny. The worst thing we can do is make "assumptions"
after the fact in a case like this. This is the reason that I stopped
participating in the AOPA forums. It runs wild with people that have littl
e
respect for others in this kind of situation and make many assumptions even
before any kind of report is out. My mind goes back to the P-51 crash last
year at Oshkosh on that one=85
The list has been pretty quiet over the past week, I believe out of respec
t
for Jerry. We all feel your pain, perhaps not to the degree you do, but
nevertheless, we feel it.
Over time, the conversation on the list will pick up and the healing proces
s
will take care of itself.
Until then, I agree with you that we would be best to keep our
interpretation and advice to ourselves until some kind of "official" report
is made.
On 6/6/08, Johnny Thompson <14az@mysprocketmail.com> wrote:
>
> I understand everyone wanting to know everything about the crash, why an
d
> how. That answer will most likely take months. Normally NTSB would not
> investigate the accident since it is an experimental aircraft. However,
> they are. This is good for us, as they will inspect and test each possibl
e
> area and when completed report. The preliminary copy is below.
> http://www.ntsb.gov/ntsb/query.asp Please note that as with all first
> reports, much of the information can be wrong. Initial information is oft
en
> from non-aviation observers. As for what went wrong Lightning or other
> manufacturers would be involved in aiding the investigation if requested
and
> they volunteered to do so. If they aid in the investigation they will not
be
> allowed to discuss anything to anyone other then the investigating team.
> Until the investigation is closed, only NTSB can release information. If
> they find a major problem that effects safety of flight of all similar
> equipment, normally, a notice could proceed a completed report.
>
> Please don't guess. For all those that knew Jerry, flew and worked along
> side of him and were with him before and after the crash, your guess and
> thoughts on what happened and what he did after the prop left the aircraf
t
> is tearing us apart. It will come out in the report. I will say this, wh
en
> wondering why he as a pilot did or did not react, WE DO NOT KNOW. In comb
at
> my aircraft was hit and the explosion blew off the front of the aircraft.
> The aircraft could still fly. However, it started falling out of control
.
> My copilot/gunner took over and saved us because on my lack of ability to
> react and fly. My excuse was I had a bullet logged in my spine and could
not
> react. During any incident when things come off or break they do collater
al
> damage. I DO NOT KNOW IF THIS HAPPENED TO JERRY. Please back off and save
> the "what ifs" till we know all the facts.
>
> As for checking the torque on the flange to crankshaft, DO IT BY THE BOOK
> ONLY. If you followed the Jabiru manual, when assembling the aircraft you
> should be ok. If you check the torque, then go by the book. I have an
> electronic torque tester that must be used for this operation. If you mov
e
> the bolt, and you will, you must remove and reinstall per the Jabriu
> instruction since you just destroyed the sealant. Use only the prescribed
> sealant but check for new any sealants recommended.
>
> It would be best for all of us to wait for Arion to tell us what to do. O
k
> to question ourselves, but please stop there. Some of us are very sensiti
ve
> due to loosing a good friend.
> Johnny Thompson NTSB Identification: *SEA08LA149*
> 14 CFR Part 91: General Aviation
> Accident occurred Sunday, June 01, 2008 in Marana, AZ
> Aircraft: Van Heeswyk Lightning, registration: N62JV
> Injuries: 1 Fatal.
>
> This is preliminary information, subject to change, and may contain error
s.
> Any errors in this report will be corrected when the final report has bee
n
> completed.
> On June 1, 2008 about 0816 mountain standard time, an amateur built Van
> Heeswyk Lightning airplane, N62JV, registered to and operated by the pilo
t,
> was substantially damaged when it impacted terrain while maneuvering near
> Marana, Arizona. The private pilot, who was the sole occupant of the
> airplane, was killed. Visual meteorological conditions prevailed and no
> flight plan was filed for the personal local flight that was operated und
er
> the provisions of Title 14 Code of Federal Regulations (CFR) Part 91. The
> flight departed from Ryan Field Airport, Tucson, Arizona, about 0559.
>
> Witnesses located adjacent to the accident site reported observing the
> propeller assembly separate from the airplane as it flew over their
> position. One witness stated that after the propeller separated, the
> airplane pitched upwards and subsequently descended into terrain. Another
> witness reported hearing the "engine rev up" just prior to the airplane
> impacting the ground.
>
> Examination of the airplane by a Federal Aviation Administration (FAA)
> inspector revealed that the airplane came to rest in an upright position
> within an open field. The fuselage was partially separated aft of the cab
in.
> All primary flight controls were located within the accident site. The
> propeller assembly and propeller flange extension were found separated fr
om
> the engine and were located about .62 miles southwest of the accident sit
e.
> The wreckage was recovered to a secure location for further examination
>
> ----- Original Message -----
> *From:* Kayberg@AOL.COM
> *To:* lightning-list@matronics.com
> *Sent:* Friday, June 06, 2008 8:57 AM
> *Subject:* Lightning-List: Fatal Lightning Aircraft Crash
>
>
> In a message dated 6/6/2008 10:31:36 A.M. Eastern Daylight Time,
> jhausch@charter.net writes:
>
> Respectfully, when might we get some add'l news on this unfortunate
> accident?
>
>
> I'm sympathetic about your interest, but it prompts my problem-solving
> inclination. In my opinion the accident breaks down into two parts.
>
> 1) The prop went away in flight but was recovered whole. that means the
> prop flange to engine components failed for some reason.....metal fatigue
,
> bad bolts, or loose bolts. I am betting on loose or bad bolts....since
no
> other Jabs have lost the prop. Even when Nick hit the turkey vulture in
> flight with the prop, splintering it into toothpicks, the flange was fine
> and is still flying.
>
> We will likely get some definitive statement in the coming months, bu
t
> it is safe to say that checking the prop to engine attachment by wiggling
> the prop is a must before flights, in my opinion. I am suggesting a care
ful
> wiggle in the 12 oclock and also in the 9 oclock position. It shouldn't
> wiggle at all, but be sure it is not the engine mounts. Might not be a b
ad
> idea to check the torque on the flange bolts soon.
>
> I dont expect much more on that subject until the metallurgical data
> comes in.
>
> 2) The second issue is the piloting after the prop went away. It think i
s
> a reasonable conclusion that there was some loss of control with a result
ing
> impact. Whatever the details, I think the lesson to all of us is to
> practice emergency procedures and to always have a plan to land when flyi
ng
> below 2,000 feet agl.
>
> I observe that the Lightning is a "step-up" airplane for a good portion o
f
> the builders and requires more attention than their previous birds. Thin
gs
> happen faster. People want responsive controls, but that responsiveness
> means you get into trouble much faster, particularly if destracted. I se
e
> panels getting cluttered with lots of information-giving instruments.
> Perhaps the first emergency procedure if you are less than 2,000 feet agl
> should be to shut off the Master Switch!!!! That would focus attention
on
> flying and landing rather than the panel! Of course it would also mean
you
> should wire your flaps (and boost pump) directly to the battery, since no
t
> using flaps on landing has also contributed to accidents.
>
> My real point is that having sound emergency procedures that focus on
> flying the plane is important and must be practiced. On my first flight
in
> a Lightning, to get the feel of the plane, I did a simulated approach and
> takeoff at a paved runway and had the engine quit at about 500 feet just
> after I passed the end of the runway. While thinking about wether to lan
d
> in the trees or the Potomac River, " I hit the boost pump and changed
> tanks. I had practiced that response previously, so it was automatic.
> Thankfully the engine started running normally again and I went to my hom
e
> field and landed. My practicing paid off.
>
> The actions of our departed colleague may be discussed at length as more
is
> known; *however*, the admonition will be the same. 1) Fly the plane firs
t
> .2)practice flying the plane first 3)plan to land when the engine quits
4)
> dont make turns if possible.
>
> I suppose I am a bit of an idealist, but I think we honor the memory of
a
> person by using their life as a lesson and admonition. My suggestion is
> that we adjust our flying behaviors and train ourselves to handle similar
> emergencies as an offering of honor.... that is something we can do right
> now.
>
> I have a feeling that more details about the pilots actions will not chan
ge
> the conclusions we might make.
>
>
> Doug Koenigsberg
>
>
> ------------------------------
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence
"
> on AOL Food<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00
030000000002>
> .
>
> *
>
> href="http://www.matronics.com/Navigator?Lightning-List">http://www.mat
ronics.com/Navigator?Lightning-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/c
*
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
I am sorry for your loss and appreciate the direction to the NTSB site. I am glad
to hear they are involved in this investigation. Although, if they normally
do not investigate accidents of experimentals, I wonder why they are now.
I did not mean to start conjecture and speculation with my inquiry, I was only
asking for any new information if available.
Respectfully,
Jim
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=186537#186537
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
----- Original Message -----
From: "jhausch" <jhausch@charter.net>
Sent: Friday, June 06, 2008 11:43 AM
Subject: Lightning-List: Re: Fatal Lightning Aircraft Crash
I served many years as an aviation accident investigation team member.
Sometimes a death will cause an investigation or if some part is also on
certified aircraft. Many other reasons also can bring an investigation. I
would suggest reading NTSB PART 830 - Notification and reporting of aircraft
accidents and --------. Being operated under LSA rules could cause an
investigation since this is a new area and not much data is around yet.
Johnny
Although, if they normally do not investigate accidents of experimentals,
I wonder why they are now.
,
> Jim
>
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning crosswind ability |
Buz,
I understand what you're getting at. The pilot's experience and
ability, coupled with other environmental factors such as gusts,
runway condition, etc. in a crosswind situation is as important as
the characteristics of the aircraft.
I was trying to get some information on what those with some
experience with the Lightning found with regard to the
characteristics of the aircraft in crosswind situations, and you and
Earl have done that.
Thanks!
Hugh Sontag
>In a message dated 6/6/2008 12:47:35 P.M. Eastern Daylight Time,
>flying@qdea.com writes:
>
>What is a reasonable maximum crosswind component for a Lightning?
>
>What have pilots successfully landed in? Would you do it again, or
>did the experience bring new meaning to the term "personal limits" ?
>
>What's a reasonable crosswind component for a pilot with recent
>crosswind experience?
>
>Is anyone willing to mention or propose the equivalent of "maximum
>demonstrated crosswind component" ?
>
>Hugh,
> Not sure what you mean by that last statement, but here are some
>"answers" to your other questions.
>I am pretty sure that Nick currently uses 15 knots as the max
>demonstrated crosswind for the Lightning. He and I have both landed
>the Lightning in "somewhat" more. The most I have had to deal with
>was a direct 17 gusting to the high twenties. The runway was long
>and wide and the Lightning handled it well. Actually I was
>flying Linda's Lightning on its third flight and the "weather
>changed" - so to speak.
> As to "what is reasonable crosswind component for a pilot with
>recent crosswind experience" the answer is it depends. It depends
>not only on the pilot recent experience but also depends on the
>following:
>-what kind of airplane was that recent experience in?
>-what was the recent cross component that the pilot handled?
>-is the cross wind steady or gusting?
>-how wide (and long is the runway)?
>-is the runway dry?
>-have you practiced landings with less than normal flaps (30
>degrees) recently? (stall speed will vary with flaps used and
>aircraft weight at the time of landing. The lower the stall speed
>the more cross control you will need to use to counter the x-wind.
>The Lightning has sufficient control to handle more than the 15
>knots if the pilot has the recent experience and proficiency)
>-is there a divert airport with a runway more into the wind?
>You may be able to think of other variables as well, but you get the
>point. Flying is a process of continually making decisions. The
>more experience and data points you have in your "bag of tricks" the
>better off you are. In fact, I am sure that is why you posed the
>question - more info for your "bag of tricks".
>Blue Skies,
>Buz
>
>
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Flying your Lightning for the first time |
Jim, lets see a photo of the completed project, Tex
----- Original Message -----
From: Jim Langley
To: lightning-list@matronics.com
Sent: Friday, June 06, 2008 10:29 AM
Subject: Lightning-List: Flying your Lightning for the first time
Short of a few odds and ends like putting my tail number on and doing
a weight and balance, I am FINISHED WITH MY LIGHTNING!!!
(happy days, huh?)
Anyway, I have been spending some time talking with Ryan and Buz about
the next steps after the airworthyness inspection, and before I actually
strap myself into the seat and take off.
This is the way I am approaching things, your comments are welcome:
1.. In preparation for flying my aircraft, I tried to find something
that I could rent that was close in type, i.e. stick, low wing, nose
wheel, etc. it is however, hard to be flying when you are spending time
and money building, but I have logged some hours.
2.. I called Falcon and secured insurance on my Lightning with Ryan
included.
3.. Ryan will be flying the first 5+ hours, and we will work
together to make sure everything is working as it should and nothing is
going to "fall off".
4.. Per suggestion, I am looking for something like a Katana to rent
and fly, as from what I have heard, it is pretty close to the Lightning
in feel. Right now I am flying a Evektor SportStar only because it is
the only small low wing with a stick that I can find to rent.
5.. Establish a defined test plan for multi-phase testing per FAA
Advisory Circular 90-89 and contingency plan for emergencies. I have
been working off of a graciously supplied example for this.
6.. I think after I have a few hours in my aircraft, I will be
taking it home right away. Lancaster, (KLNS) has two nice long and wide
runways and lots of room to fly, so I can practice different types of
takeoffs and landings, and my area has a fair number of airports close,
so I can "ring er out" and still be within gliding distance of a good
place to land. This will help to break in the engine and build time on
the aircraft. Doing mostly landings and takeoffs is a little tougher on
the engine during the break-in period.
7.. While I am flying and recording results, use this information to
develop an aircraft manual with weight & balance, limitations,
performance data, etc=85
The cool thing about the MGL Odyssey that I put in the panel is that
it can act like a "black box" flight recorder and write this data to a
SDRam card while in flight. I can then go back and use this information
to learn more about my flight performance and characteristics; neat!
Once I have flown off the hours and am totally comfortable with the
aircraft, I can finally take my daughter up for a ride. (She's been
bugging me from day one).
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
I always thought that ultralight accidents were not investigated by
Federal officals, but that accidents involving N-numbered aircraft
always are.
As a friend of mine once said, from the point of view of the FAA,
ultralights aren't airplanes, and therefore aren't regulated as such.
Hugh Sontag
><14az@mysprocketmail.com>
>
>
>----- Original Message ----- From: "jhausch" <jhausch@charter.net>
>To: <lightning-list@matronics.com>
>Sent: Friday, June 06, 2008 11:43 AM
>Subject: Lightning-List: Re: Fatal Lightning Aircraft Crash
>
>I served many years as an aviation accident investigation team
>member. Sometimes a death will cause an investigation or if some
>part is also on certified aircraft. Many other reasons also can
>bring an investigation. I would suggest reading NTSB PART 830 -
>Notification and reporting of aircraft accidents and --------. Being
>operated under LSA rules could cause an investigation since this is
>a new area and not much data is around yet. Johnny
>
>
> Although, if they normally do not investigate accidents of
>experimentals, I wonder why they are now.
>,
>>Jim
>>
>
>
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Flying your Lightning for the first time |
oops, I expect to have one this weekend, will post it on the list...
On 6/6/08, Tex Mantell <wb2ssj@earthlink.net> wrote:
>
> Jim, lets see a photo of the completed project, Tex
>
> ----- Original Message -----
> *From:* Jim Langley <pequeajim@gmail.com>
> *To:* lightning-list@matronics.com
> *Sent:* Friday, June 06, 2008 10:29 AM
> *Subject:* Lightning-List: Flying your Lightning for the first time
>
>
> Short of a few odds and ends like putting my tail number on and doing a
> weight and balance, I am FINISHED WITH MY LIGHTNING!!!
>
>
> (happy days, huh?)
>
>
> Anyway, I have been spending some time talking with Ryan and Buz about th
e
> next steps after the airworthyness inspection, and before I actually stra
p
> myself into the seat and take off.
>
>
> This is the way I am approaching things, your comments are welcome:
>
>
> 1. In preparation for flying my aircraft, I tried to find something
> that I could rent that was close in type, i.e. stick, low wing, nose w
heel,
> etc. it is however, hard to be flying when you are spending time and
> money building, but I have logged some hours.
> 2. I called Falcon and secured insurance on my Lightning with Ryan
> included.
> 3. Ryan will be flying the first 5+ hours, and we will work together t
o
> make sure everything is working as it should and nothing is going to "
fall
> off".
> 4. Per suggestion, I am looking for something like a Katana to rent an
d
> fly, as from what I have heard, it is pretty close to the Lightning in
feel.
> Right now I am flying a Evektor SportStar only because it is the only
> small low wing with a stick that I can find to rent.
> 5. Establish a defined test plan for multi-phase testing per FAA
> Advisory Circular 90-89 and contingency plan for emergencies. I have
> been working off of a graciously supplied example for this.
> 6. I think after I have a few hours in my aircraft, I will be taking i
t
> home right away. Lancaster, (KLNS) has two nice long and wide runways
> and lots of room to fly, so I can practice different types of takeoffs
and
> landings, and my area has a fair number of airports close, so I can "r
ing er
> out" and still be within gliding distance of a good place to land. Th
is
> will help to break in the engine and build time on the aircraft. Doin
g
> mostly landings and takeoffs is a little tougher on the engine during
the
> break-in period.
> 7. While I am flying and recording results, use this information to
> develop an aircraft manual with weight & balance, limitations, perform
ance
> data, etc=85
>
>
> The cool thing about the MGL Odyssey that I put in the panel is that it c
an
> act like a "black box" flight recorder and write this data to a SDRam car
d
> while in flight. I can then go back and use this information to learn
> more about my flight performance and characteristics; neat!
>
>
> Once I have flown off the hours and am totally comfortable with the
> aircraft, I can finally take my daughter up for a ride. (She's been
> bugging me from day one).
>
> *
>
> href="http://www.matronics.com/Navigator?Lightning-List">http://www.mat
ronics.com/Navigator?Lightning-List
> href="http://forums.matronics.com">http://forums.matronics.com
> href="http://www.matronics.com/contribution">http://www.matronics.com/c
*
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
In a message dated 6/6/2008 1:51:34 P.M. Eastern Daylight Time,
14az@mysprocketmail.com writes:
I understand everyone wanting to know everything about the crash, why and
how. That answer will most likely take months. Normally NTSB would not
investigate the accident since it is an experimental aircraft. However, they
are.
This is good for us, as they will inspect and test each possible area and
when completed report. The preliminary copy is below.
_http://www.ntsb.gov/ntsb/query.asp_ (http://www.ntsb.gov/ntsb/query.asp) Please note that as with
all first reports, much of the information can be wrong. Initial information
is often from non-aviation observers. As for what went wrong Lightning or
other manufacturers would be involved in aiding the investigation if requested
and they volunteered to do so. If they aid in the investigation they will not
be allowed to discuss anything to anyone other then the investigating team.
Until the investigation is closed, only NTSB can release information. If they
find a major problem that effects safety of flight of all similar equipment,
normally, a notice could proceed a completed report.
Please don't guess. For all those that knew Jerry, flew and worked along
side of him and were with him before and after the crash, your guess and
thoughts on what happened and what he did after the prop left the aircraft is
tearing us apart. It will come out in the report. I will say this, when wondering
why he as a pilot did or did not react, WE DO NOT KNOW. In combat my
aircraft was hit and the explosion blew off the front of the aircraft. The aircraft
could still fly. However, it started falling out of control. My
copilot/gunner took over and saved us because on my lack of ability to react and
fly. My
excuse was I had a bullet logged in my spine and could not react. During any
incident when things come off or break they do collateral damage. I DO NOT
KNOW IF THIS HAPPENED TO JERRY. Please back off and save the "what ifs" till
we know all the facts.
As for checking the torque on the flange to crankshaft, DO IT BY THE BOOK
ONLY. If you followed the Jabiru manual, when assembling the aircraft you
should be ok. If you check the torque, then go by the book. I have an electronic
torque tester that must be used for this operation. If you move the bolt, and
you will, you must remove and reinstall per the Jabriu instruction since you
just destroyed the sealant. Use only the prescribed sealant but check for
new any sealants recommended.
It would be best for all of us to wait for Arion to tell us what to do. Ok
to question ourselves, but please stop there. Some of us are very sensitive
due to loosing a good friend.
Johnny Thompson
Sorry, but I have to respond.
First, I and everyone else that I have seen respond on this listserve joins
you in mourning a loss. We all feel bad about this for a number of reasons.
Most of us have lost friends in experimental aircraft accidents and can
remember the pain. We are not trying to be insensitive. I had a ringside seat
for the Mustang crash at OshKosh this past year. I still think about it.
I do understand that none of us will know what really happened in the
cockpit on that fateful day. I'm sure you are all considering the implications
also.
But out of a concern for those who are flying Lightnings even today, I
wanted to cut to some possible actions. I hope we can separate out some emotions
so we can move on at least with the mechanical consequences. So I beg to
gently disagree with a couple things you said.
I'm stumbling over the "It would be best for all of us to wait for Arion to
tell us what to do." Stating the obvious, Arion is not the manufacturer,
each builder/owner has that responsiblity. Arion only supplies raw materials
that can be made into a flying machine. Further, it does not appear that the
accident was caused by any airframe problems. So I dont see that Arion has
any need to respond.
It is another story with the Jabiru engine and perhaps the prop
manufacturer. Clearly something happened. As I noted previously and so do you,
we will
have to wait for that report. No problem. And I understand it will probably
be a BIG SECRET until then. It is also a sensitive legal issue, so that may
come into play.
Meantime, I think anyone who is flying a Lighting should give some thought
to the possible failure of the prop extension bolts and or extension. I
think it is totally reasonable to offer possible causes and possible preventions.
If there are things that can be done, we should do them. It may save a
life if we all play detective and check things out. For example, if the
failed prop was installed by using an electronic torque tester, perhaps that is
significant...or it would be significant if it wasn't. I remember thinking
that where the extension meets the crankshaft it must be clean so that it will
all mate up correctly. We have observed that it is hard to get the bolts
out even if you heat them. We also wonder what effects heating them have on
the bolts. Could there be a problem with bolt length? Could there be a
problem with the threadlock? Do you need threadlock if you are using safety
wire? I think we should discuss all this, conjection or not.
I also have a high degree of skepticism when people want to "wait for the
government to do it". I live 5 miles from the main Social Security
headquarters and in a welfare state. I find my faith in the Government to be
challenged almost daily. While there are certainly talented people on the NTSB,
they
may have other interests leaning on them. The crash of Steve Whitman and
his wife being an example.
In the meantime, I think it is prudent to assume your prop could fly off
your plane during some flight operations. Makes sense to me to have a plan for
if that happens.
I understand there is a time and place for truth to be told. I would just
hope that real truth would not be withheld because someone might be offended.
I would be very upset and pissed if withholding truth got somebody hurt.
Just my opinion.
Doug Koenigsberg
**************Get trade secrets for amazing burgers. Watch "Cooking with
Tyler Florence" on AOL Food.
(http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002)
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Flying your Lightning for the first time |
Jim,
I'll read over your email and think about if I have anything to add late
r. I am glad to see that you have a plan. Remember, those first few hours
you are putting yourself in the test pilot seat whether you are one or not
. I don't say that to scare anybody off. In flight testing you move slowl
y from what is known to what is unknown. Makes sense huh? I would definat
ely spend some time in the Katana. The Lightning is faster, but I was actu
ally pleasently surprised to find such good characteristics in the Lightnin
g. I hold the Diamond company as being a great aircraft company who went f
rom experimentals to normally certified and even jets! Like some of us hav
e said before, pull the power to idle at altitude and practice turn rates l
ike you were turning back to the airport. Vary airspeeds and bank rates.
See what works good and gives you a good trade off for quick turn, margin o
n airspeed, and loss of altitude. Give yourself an artificial ground level
at say 3k feet and try to end up with some altitude to spare once you get
180 degrees. Do the same thing for 90 degrees, etc. Remember, if anything
did happen it's always better to fly into the ground under control than to
fly into anything out of control. One of the guys from Shelbyville that I
had met put a Viking down in the top of trees at night. Now he ran out of
gas so that was dumb, but he maintained control and put it down in the top
s of trees, at night, in the mountains. He walked away (climbed down) with
out a scratch. I know it's been said a lot, but it is important. Brian W.
list@matronics.comSubject: Lightning-List: Flying your Lightning for the fi
rst time
Short of a few odds and ends like putting my tail number on and doing a wei
ght and balance, I am FINISHED WITH MY LIGHTNING!!!
(happy days, huh?)
Anyway, I have been spending some time talking with Ryan and Buz about the
next steps after the airworthyness inspection, and before I actually strap
myself into the seat and take off.
This is the way I am approaching things, your comments are welcome:
In preparation for flying my aircraft, I tried to find something that I cou
ld rent that was close in type, i.e. stick, low wing, nose wheel, etc. it
is however, hard to be flying when you are spending time and money building
, but I have logged some hours.
I called Falcon and secured insurance on my Lightning with Ryan included.
Ryan will be flying the first 5+ hours, and we will work together to make s
ure everything is working as it should and nothing is going to "fall off".
Per suggestion, I am looking for something like a Katana to rent and fly, a
s from what I have heard, it is pretty close to the Lightning in feel. Rig
ht now I am flying a Evektor SportStar only because it is the only small lo
w wing with a stick that I can find to rent.
Establish a defined test plan for multi-phase testing per FAA Advisory Circ
ular 90-89 and contingency plan for emergencies. I have been working off o
f a graciously supplied example for this.
I think after I have a few hours in my aircraft, I will be taking it home r
ight away. Lancaster, (KLNS) has two nice long and wide runways and lots o
f room to fly, so I can practice different types of takeoffs and landings,
and my area has a fair number of airports close, so I can "ring er out" and
still be within gliding distance of a good place to land. This will help
to break in the engine and build time on the aircraft. Doing mostly landin
gs and takeoffs is a little tougher on the engine during the break-in perio
d.
While I am flying and recording results, use this information to develop an
aircraft manual with weight & balance, limitations, performance data, etc
=85
The cool thing about the MGL Odyssey that I put in the panel is that it can
act like a "black box" flight recorder and write this data to a SDRam card
while in flight. I can then go back and use this information to learn mor
e about my flight performance and characteristics; neat!
Once I have flown off the hours and am totally comfortable with the aircraf
t, I can finally take my daughter up for a ride. (She's been bugging me fr
om day one).
_________________________________________________________________
Instantly invite friends from Facebook and other social networks to join yo
u on Windows Live=99 Messenger.
https://www.invite2messenger.net/im/?source=TXT_EML_WLH_InviteFriends
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Flying your Lightning for the first time |
Thanks for the advice Brian. You're right, slow is a good thing sometimes.
On 6/6/08, Brian Whittingham <dashvii@hotmail.com> wrote:
>
> Jim,
> I'll read over your email and think about if I have anything to add
> later. I am glad to see that you have a plan. Remember, those first few
> hours you are putting yourself in the test pilot seat whether you are one
or
> not. I don't say that to scare anybody off. In flight testing you move
> slowly from what is known to what is unknown. Makes sense huh? I would
> definately spend some time in the Katana. The Lightning is faster, but I
> was actually pleasently surprised to find such good characteristics in th
e
> Lightning. I hold the Diamond company as being a great aircraft company
who
> went from experimentals to normally certified and even jets! Like some o
f
> us have said before, pull the power to idle at altitude and practice turn
> rates like you were turning back to the airport. Vary airspeeds and bank
> rates. See what works good and gives you a good trade off for quick turn
,
> margin on airspeed, and loss of altitude. Give yourself an artificial
> ground level at say 3k feet and try to end up with some altitude to spare
> once you get 180 degrees. Do the same thing for 90 degrees, etc. Rememb
er,
> if anything did happen it's always better to fly into the ground under
> control than to fly into anything out of control. One of the guys from
> Shelbyville that I had met put a Viking down in the top of trees at night
.
> Now he ran out of gas so that was dumb, but he maintained control and put
it
> down in the tops of trees, at night, in the mountains. He walked away
> (climbed down) without a scratch. I know it's been said a lot, but it is
> important. Brian W.
>
>
> ------------------------------
> Date: Fri, 6 Jun 2008 10:29:51 -0400
> From: pequeajim@gmail.com
> To: lightning-list@matronics.com
> Subject: Lightning-List: Flying your Lightning for the first time
>
> Short of a few odds and ends like putting my tail number on and doing a
> weight and balance, I am FINISHED WITH MY LIGHTNING!!!
>
>
> (happy days, huh?)
>
>
> Anyway, I have been spending some time talking with Ryan and Buz about th
e
> next steps after the airworthyness inspection, and before I actually stra
p
> myself into the seat and take off.
>
>
> This is the way I am approaching things, your comments are welcome:
>
>
> 1. In preparation for flying my aircraft, I tried to find something
> that I could rent that was close in type, i.e. stick, low wing, nose w
heel,
> etc. it is however, hard to be flying when you are spending time and
> money building, but I have logged some hours.
> 2. I called Falcon and secured insurance on my Lightning with Ryan
> included.
> 3. Ryan will be flying the first 5+ hours, and we will work together t
o
> make sure everything is working as it should and nothing is going to "
fall
> off".
> 4. Per suggestion, I am looking for something like a Katana to rent an
d
> fly, as from what I have heard, it is pretty close to the Lightning in
feel.
> Right now I am flying a Evektor SportStar only because it is the only
> small low wing with a stick that I can find to rent.
> 5. Establish a defined test plan for multi-phase testing per FAA
> Advisory Circular 90-89 and contingency plan for emergencies. I have
> been working off of a graciously supplied example for this.
> 6. I think after I have a few hours in my aircraft, I will be taking i
t
> home right away. Lancaster, (KLNS) has two nice long and wide runways
> and lots of room to fly, so I can practice different types of takeoffs
and
> landings, and my area has a fair number of airports close, so I can "r
ing er
> out" and still be within gliding distance of a good place to land. Th
is
> will help to break in the engine and build time on the aircraft. Doin
g
> mostly landings and takeoffs is a little tougher on the engine during
the
> break-in period.
> 7. While I am flying and recording results, use this information to
> develop an aircraft manual with weight & balance, limitations, perform
ance
> data, etc=85
>
>
> The cool thing about the MGL Odyssey that I put in the panel is that it c
an
> act like a "black box" flight recorder and write this data to a SDRam car
d
> while in flight. I can then go back and use this information to learn
> more about my flight performance and characteristics; neat!
>
>
> Once I have flown off the hours and am totally comfortable with the
> aircraft, I can finally take my daughter up for a ride. (She's been
> bugging me from day one).
>
> *
>
> " target=_blank>http://www.matronics.com/Navigator?Lightning-List
> p://forums.matronics.com
> blank>http://www.matronics.com/contribution
> *
>
>
> ------------------------------
> Instantly invite friends from Facebook and other social networks to join
> you on Windows Live=99 Messenger. Invite friends now!<https://www.invite2
messenger.net/im/?source=TXT_EML_WLH_InviteFriends>
>
> *
>
===========
===========
===========
===========
> *
>
>
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fatal Lightning Aircraft Crash |
Johnny,
I wondered how you guys out west were doing. I know Greg and his wife
and that they will welcome you into their family from
day one. Good people and I'm sure hard on them. I appreciate your candid
response and telling a very personal story that happened
to you. Maybe one of these days I'll get a chance to meet you in person an
d hear some good flying stories that I'm sure that you
have. Pilots tend to be a problem solving bunch and want to react quicker
rather than later. I think this is one of those times like when you've got
a landing gear that won't come down. No need to rush the trouble shooting
, best to remain in a holding pattern for a while and trouble shoot when th
e time is appropriate. There is something to be learned by every accident,
incident, and the most often: personal almost uh ohs. I have been around
FAA and NTSB investigations before and they are a good bunch. They'll find
out what happened and make any recommendations that they think are needed.
Until that time any speculation is just that.
To everybody who has a current project I would like to encourage you to go
on a flight when you're mentally prepared and focus on the basics of altitu
de, airspeed, checklist usage. It keeps your mind focused, even in a time
like this and reminds you of the common thread that we share. Keep on work
ing on the projects. I would say to be safe, pay attention to checklists a
nd form, but not because of recent events, but b/c that will make you a bet
ter and safer pilot which is good for everybody. Brian W.
From: 14az@mysprocketmail.comTo: lightning-list@matronics.comSubject: Re: L
ightning-List: Fatal Lightning Aircraft CrashDate: Fri, 6 Jun 2008 10:48:10
-0700
I understand everyone wanting to know everything about the crash, why and h
ow. That answer will most likely take months. Normally NTSB would not inv
estigate the accident since it is an experimental aircraft. However, they
are. This is good for us, as they will inspect and test each possible area
and when completed report. The preliminary copy is below. http://www.ntsb
.gov/ntsb/query.asp Please note that as with all first reports, much of th
e information can be wrong. Initial information is often from non-aviation
observers. As for what went wrong Lightning or other manufacturers would be
involved in aiding the investigation if requested and they volunteered to
do so. If they aid in the investigation they will not be allowed to discuss
anything to anyone other then the investigating team. Until the investigat
ion is closed, only NTSB can release information. If they find a major prob
lem that effects safety of flight of all similar equipment, normally, a not
ice could proceed a completed report.
Please don't guess. For all those that knew Jerry, flew and worked along s
ide of him and were with him before and after the crash, your guess and tho
ughts on what happened and what he did after the prop left the aircraft is
tearing us apart. It will come out in the report. I will say this, when wo
ndering why he as a pilot did or did not react, WE DO NOT KNOW. In combat m
y aircraft was hit and the explosion blew off the front of the aircraft. Th
e aircraft could still fly. However, it started falling out of control. My
copilot/gunner took over and saved us because on my lack of ability to rea
ct and fly. My excuse was I had a bullet logged in my spine and could not r
eact. During any incident when things come off or break they do collateral
damage. I DO NOT KNOW IF THIS HAPPENED TO JERRY. Please back off and save t
he "what ifs" till we know all the facts.
As for checking the torque on the flange to crankshaft, DO IT BY THE BOOK O
NLY. If you followed the Jabiru manual, when assembling the aircraft you sh
ould be ok. If you check the torque, then go by the book. I have an electr
onic torque tester that must be used for this operation. If you move the bo
lt, and you will, you must remove and reinstall per the Jabriu instruction
since you just destroyed the sealant. Use only the prescribed sealant but c
heck for new any sealants recommended.
It would be best for all of us to wait for Arion to tell us what to do. Ok
to question ourselves, but please stop there. Some of us are very sensitive
due to loosing a good friend.
Johnny Thompson
NTSB Identification: SEA08LA14914 CFR Part 91: General AviationAccident occ
urred Sunday, June 01, 2008 in Marana, AZAircraft: Van Heeswyk Lightning, r
egistration: N62JVInjuries: 1 Fatal.
This is preliminary information, subject to change, and may contain errors.
Any errors in this report will be corrected when the final report has been
completed.On June 1, 2008 about 0816 mountain standard time, an amateur bu
ilt Van Heeswyk Lightning airplane, N62JV, registered to and operated by th
e pilot, was substantially damaged when it impacted terrain while maneuveri
ng near Marana, Arizona. The private pilot, who was the sole occupant of th
e airplane, was killed. Visual meteorological conditions prevailed and no f
light plan was filed for the personal local flight that was operated under
the provisions of Title 14 Code of Federal Regulations (CFR) Part 91. The f
light departed from Ryan Field Airport, Tucson, Arizona, about 0559.Witness
es located adjacent to the accident site reported observing the propeller a
ssembly separate from the airplane as it flew over their position. One witn
ess stated that after the propeller separated, the airplane pitched upwards
and subsequently descended into terrain. Another witness reported hearing
the "engine rev up" just prior to the airplane impacting the ground. Examin
ation of the airplane by a Federal Aviation Administration (FAA) inspector
revealed that the airplane came to rest in an upright position within an op
en field. The fuselage was partially separated aft of the cabin. All primar
y flight controls were located within the accident site. The propeller asse
mbly and propeller flange extension were found separated from the engine an
d were located about .62 miles southwest of the accident site. The wreckage
was recovered to a secure location for further examination
----- Original Message -----
From: Kayberg@AOL.COM
Sent: Friday, June 06, 2008 8:57 AM
Subject: Lightning-List: Fatal Lightning Aircraft Crash
In a message dated 6/6/2008 10:31:36 A.M. Eastern Daylight Time, jhausch@ch
arter.net writes:
Respectfully, when might we get some add'l news on this unfortunate accide
nt?
I'm sympathetic about your interest, but it prompts my problem-solving incl
ination. In my opinion the accident breaks down into two parts.
1) The prop went away in flight but was recovered whole. that means the pr
op flange to engine components failed for some reason.....metal fatigue, ba
d bolts, or loose bolts. I am betting on loose or bad bolts....since no o
ther Jabs have lost the prop. Even when Nick hit the turkey vulture in fli
ght with the prop, splintering it into toothpicks, the flange was fine and
is still flying.
We will likely get some definitive statement in the coming months, but
it is safe to say that checking the prop to engine attachment by wiggling t
he prop is a must before flights, in my opinion. I am suggesting a careful
wiggle in the 12 oclock and also in the 9 oclock position. It shouldn't w
iggle at all, but be sure it is not the engine mounts. Might not be a bad
idea to check the torque on the flange bolts soon.
I dont expect much more on that subject until the metallurgical data co
mes in.
2) The second issue is the piloting after the prop went away. It think is
a reasonable conclusion that there was some loss of control with a resultin
g impact. Whatever the details, I think the lesson to all of us is to pra
ctice emergency procedures and to always have a plan to land when flying be
low 2,000 feet agl.
I observe that the Lightning is a "step-up" airplane for a good portion of
the builders and requires more attention than their previous birds. Things
happen faster. People want responsive controls, but that responsiveness
means you get into trouble much faster, particularly if destracted. I see
panels getting cluttered with lots of information-giving instruments. Pe
rhaps the first emergency procedure if you are less than 2,000 feet agl sh
ould be to shut off the Master Switch!!!! That would focus attention on f
lying and landing rather than the panel! Of course it would also mean you
should wire your flaps (and boost pump) directly to the battery, since not
using flaps on landing has also contributed to accidents.
My real point is that having sound emergency procedures that focus on flyin
g the plane is important and must be practiced. On my first flight in a Li
ghtning, to get the feel of the plane, I did a simulated approach and takeo
ff at a paved runway and had the engine quit at about 500 feet just after I
passed the end of the runway. While thinking about wether to land in the
trees or the Potomac River, " I hit the boost pump and changed tanks. I h
ad practiced that response previously, so it was automatic. Thankfully the
engine started running normally again and I went to my home field and land
ed. My practicing paid off.
The actions of our departed colleague may be discussed at length as more is
known; however, the admonition will be the same. 1) Fly the plane first .
2)practice flying the plane first 3)plan to land when the engine quits 4)
dont make turns if possible.
I suppose I am a bit of an idealist, but I think we honor the memory of a
person by using their life as a lesson and admonition. My suggestion is
that we adjust our flying behaviors and train ourselves to handle similar e
mergencies as an offering of honor.... that is something we can do right no
w.
I have a feeling that more details about the pilots actions will not change
the conclusions we might make.
Doug Koenigsberg
Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence"
on AOL Food.
href="http://www.matronics.com/Navigator?Lightning-List">http://www.matro
nics.com/Navigator?Lightning-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
_________________________________________________________________
Search that pays you back! Introducing Live Search cashback.
http://search.live.com/cashback/?&pkw=form=MIJAAF/publ=HMTGL/crea=s
rchpaysyouback
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Flying your Lightning for the first time |
Jim and Hugh,
I remember during my Embry-Riddle Aero Univ days that we had a form for
solo flights. At the time I thought it was stupid. Here I was an instrume
nt rated multi-engine commercial pilot and I had to have this signed card t
o fly solo? Anyhow it was basically an assessment where they would look ov
er how many takeoffs and landings that you had done in the past month in ty
pe. They would also vary the crosswind component limit based on number of
landings and particularly the number of xwind landings. Now that I've had
a few years since I've been away I see the logic in this. They couldn't tr
ust us to have enough time under our belts to know to self check ourself.
I have done about 17 knot direct crosswind. I haven't flown in about 2 mon
ths and actually need a new medical at this point, but I wouldn't fly by my
self. I've got 70ish hour or so in Lightnings and when I went back to SYI
about a month ago I had hoped to fly one. Weather was bad so I didn't, but
I wouldn't have done it alone, I would've had Nick with me b/c even though
I was fairly current in flying, I wasn't in type anymore. I can remember
days of flying in some pretty rough and gusty crosswinds when I had a lot o
f RECENT time in type and recent crosswind times. Other times I said no wh
en it was a light crosswind b/c although I was quiet current in type and ha
d plenty of recent landings they had been calm days or blowing right down t
he runway. 15 I believe is what Nick gives as a limit for the Lightning.
It's a good number, fudge factor built in. Now that doesn't include person
al limits which vary from week to week or even day to day. The Lightning i
s much better with the rudder than the Esqual was. I'd agree with Earl's a
ssessment on the landings too. One thing that I have never had a problem w
ith though was skidding or wheel hopping in the Lightning. The Esquals tho
ugh would seem to run out of rudder and at the lightweight that I flew with
could be at 15 knots, full rudder and wheel hopping. Just my own observati
on. I've seen Buz land his Esqual though at probably 17 knots xwind or mor
e though and he didn't do that. I don't know if it was extra weight or the
extra couple hundred (read thousands) of hours that he had. If you have f
lown an Esqual and then a Lightning though I'd think that you'd agree that
the Lightning had better rudder feel and authority. Again, the DA-20 would
be a good approximation of rudder authority. I find it funny that we all
try to compare and contrast against a Cessna. Guess most of us were traine
d and have a lot of time in them, but a Cessna is the most stable airplane
and easiest to land (nose dragger versions, the newer the easier) of any ai
rplane ever built. There's also a form to fill out for personal stress lev
els that can help you assess if you should fly. It's kind of corny, but ya
know it just gets you to think about things and realize, oh I am more stre
ssed than what I thought. Ultimately I think the examples listed above don
't have to be a checklist so much as a mental note. Think about it and ass
ess it. I made checklists of my own until Buz came along and made some nic
e ones for the Lightning. I combined some of my own in with his for my own
use. Some things I have a harder time of remembering than others so for s
pecific "memory item" emergencies I wrote them down and read them, went ove
r it in my mind and then practiced a lot. Buz had a couple of good things
for emergencies or abnormal procedures that I had not ever come across and
those are the great kinds of things to add to your books as you go. Young
or old, never quit learning, consider that you may learn from somebody that
is even less experienced than you, ere on the side of caution, and be vigi
lent and you'll do fine in the Lightning or any other aircraft that you fly
.
list@matronics.comSubject: Re: Lightning-List: Flying your Lightning for th
e first timeThanks for the advice Brian. You're right, slow is a good thin
g sometimes.
On 6/6/08, Brian Whittingham <dashvii@hotmail.com> wrote:
Jim, I'll read over your email and think about if I have anything to add
later. I am glad to see that you have a plan. Remember, those first few h
ours you are putting yourself in the test pilot seat whether you are one or
not. I don't say that to scare anybody off. In flight testing you move s
lowly from what is known to what is unknown. Makes sense huh? I would def
inately spend some time in the Katana. The Lightning is faster, but I was
actually pleasently surprised to find such good characteristics in the Ligh
tning. I hold the Diamond company as being a great aircraft company who we
nt from experimentals to normally certified and even jets! Like some of us
have said before, pull the power to idle at altitude and practice turn rat
es like you were turning back to the airport. Vary airspeeds and bank rate
s. See what works good and gives you a good trade off for quick turn, marg
in on airspeed, and loss of altitude. Give yourself an artificial ground l
evel at say 3k feet and try to end up with some altitude to spare once you
get 180 degrees. Do the same thing for 90 degrees, etc. Remember, if anyt
hing did happen it's always better to fly into the ground under control tha
n to fly into anything out of control. One of the guys from Shelbyville th
at I had met put a Viking down in the top of trees at night. Now he ran ou
t of gas so that was dumb, but he maintained control and put it down in the
tops of trees, at night, in the mountains. He walked away (climbed down)
without a scratch. I know it's been said a lot, but it is important. Bria
n W.
list@matronics.comSubject: Lightning-List: Flying your Lightning for the fi
rst time
Short of a few odds and ends like putting my tail number on and doing a wei
ght and balance, I am FINISHED WITH MY LIGHTNING!!!
(happy days, huh?)
Anyway, I have been spending some time talking with Ryan and Buz about the
next steps after the airworthyness inspection, and before I actually strap
myself into the seat and take off.
This is the way I am approaching things, your comments are welcome:
In preparation for flying my aircraft, I tried to find something that I cou
ld rent that was close in type, i.e. stick, low wing, nose wheel, etc. it
is however, hard to be flying when you are spending time and money building
, but I have logged some hours.
I called Falcon and secured insurance on my Lightning with Ryan included.
Ryan will be flying the first 5+ hours, and we will work together to make s
ure everything is working as it should and nothing is going to "fall off".
Per suggestion, I am looking for something like a Katana to rent and fly, a
s from what I have heard, it is pretty close to the Lightning in feel. Rig
ht now I am flying a Evektor SportStar only because it is the only small lo
w wing with a stick that I can find to rent.
Establish a defined test plan for multi-phase testing per FAA Advisory Circ
ular 90-89 and contingency plan for emergencies. I have been working off o
f a graciously supplied example for this.
I think after I have a few hours in my aircraft, I will be taking it home r
ight away. Lancaster, (KLNS) has two nice long and wide runways and lots o
f room to fly, so I can practice different types of takeoffs and landings,
and my area has a fair number of airports close, so I can "ring er out" and
still be within gliding distance of a good place to land. This will help
to break in the engine and build time on the aircraft. Doing mostly landin
gs and takeoffs is a little tougher on the engine during the break-in perio
d.
While I am flying and recording results, use this information to develop an
aircraft manual with weight & balance, limitations, performance data, etc
=85
The cool thing about the MGL Odyssey that I put in the panel is that it can
act like a "black box" flight recorder and write this data to a SDRam card
while in flight. I can then go back and use this information to learn mor
e about my flight performance and characteristics; neat!
Once I have flown off the hours and am totally comfortable with the aircraf
t, I can finally take my daughter up for a ride. (She's been bugging me fr
om day one).
" target=_blank>http://www.matronics.com/Navigator?Lightning-List
p://forums.matronics.com
blank>http://www.matronics.com/contribution
Instantly invite friends from Facebook and other social networks to join yo
u on Windows Live=99 Messenger. Invite friends now!
href="http://www.matronics.com/Navigator?Lightning-List" target="_blank
">http://www.matronics.com/Navigator?Lightning-List
href="http://forums.matronics.com/" target="_blank">http://forums.matro
nics.com
href="http://www.matronics.com/contribution" target="_blank">http://www
.matronics.com/contribution
_________________________________________________________________
Now you can invite friends from Facebook and other groups to join you on Wi
ndows Live=99 Messenger. Add now.
https://www.invite2messenger.net/im/?source=TXT_EML_WLH_AddNow_Now
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Doug
I just read your response to the Arizona accident. I am very impressed
with your writing abilities and even more so with your advice. It is
extremely valid.
Thank you.
Gary Pennington
----- Original Message -----
From: Kayberg@AOL.COM<mailto:Kayberg@AOL.COM>
To: lightning-list@matronics.com<mailto:lightning-list@matronics.com>
Sent: Friday, June 06, 2008 8:57 AM
Subject: Lightning-List: Fatal Lightning Aircraft Crash
In a message dated 6/6/2008 10:31:36 A.M. Eastern Daylight Time,
jhausch@charter.net<mailto:jhausch@charter.net> writes:
Respectfully, when might we get some add'l news on this unfortunate
accident?
I'm sympathetic about your interest, but it prompts my problem-solving
inclination. In my opinion the accident breaks down into two parts.
1) The prop went away in flight but was recovered whole. that means
the prop flange to engine components failed for some reason.....metal
fatigue, bad bolts, or loose bolts. I am betting on loose or bad
bolts....since no other Jabs have lost the prop. Even when Nick hit the
turkey vulture in flight with the prop, splintering it into toothpicks,
the flange was fine and is still flying.
We will likely get some definitive statement in the coming months,
but it is safe to say that checking the prop to engine attachment by
wiggling the prop is a must before flights, in my opinion. I am
suggesting a careful wiggle in the 12 oclock and also in the 9 oclock
position. It shouldn't wiggle at all, but be sure it is not the engine
mounts. Might not be a bad idea to check the torque on the flange bolts
soon.
I dont expect much more on that subject until the metallurgical
data comes in.
2) The second issue is the piloting after the prop went away. It
think is a reasonable conclusion that there was some loss of control
with a resulting impact. Whatever the details, I think the lesson to
all of us is to practice emergency procedures and to always have a plan
to land when flying below 2,000 feet agl.
I observe that the Lightning is a "step-up" airplane for a good
portion of the builders and requires more attention than their previous
birds. Things happen faster. People want responsive controls, but
that responsiveness means you get into trouble much faster,
particularly if destracted. I see panels getting cluttered with lots of
information-giving instruments. Perhaps the first emergency procedure
if you are less than 2,000 feet agl should be to shut off the Master
Switch!!!! That would focus attention on flying and landing rather
than the panel! Of course it would also mean you should wire your
flaps (and boost pump) directly to the battery, since not using flaps on
landing has also contributed to accidents.
My real point is that having sound emergency procedures that focus on
flying the plane is important and must be practiced. On my first flight
in a Lightning, to get the feel of the plane, I did a simulated approach
and takeoff at a paved runway and had the engine quit at about 500 feet
just after I passed the end of the runway. While thinking about wether
to land in the trees or the Potomac River, " I hit the boost pump and
changed tanks. I had practiced that response previously, so it was
automatic. Thankfully the engine started running normally again and I
went to my home field and landed. My practicing paid off.
The actions of our departed colleague may be discussed at length as
more is known; however, the admonition will be the same. 1) Fly the
plane first .2)practice flying the plane first 3)plan to land when the
engine quits 4) dont make turns if possible.
I suppose I am a bit of an idealist, but I think we honor the memory
of a person by using their life as a lesson and admonition. My
suggestion is that we adjust our flying behaviors and train ourselves to
handle similar emergencies as an offering of honor.... that is something
we can do right now.
I have a feeling that more details about the pilots actions will not
change the conclusions we might make.
Doug Koenigsberg
-------------------------------------------------------------------------
-----
Get trade secrets for amazing burgers. Watch "Cooking with Tyler
Florence" on AOL
Food<http://food.aol.com/tyler-florence?video=4?&NCID=aolfod000300000
00002>.
http://www.matronics.com/Navigator?Lightning-List<http://www.matronics.co
m/Navigator?Lightning-List>
http://www.matronics.com/contribution<http://www.matronics.com/contributi
on>
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Thanks Doug, good points
I agree with you. I am and will continue to inspect my aircraft while
thinking of this accident. I know everyone is being considerate and not
talking about what Jerry did or did not do after the prop left. That is
the only thing I was really concerned about. This was a terrible
accident and has been hard on all of us, especially Greg and Crystal
Hobbs.
I know some of what happened, I was at the crash site Sunday and at
Greg's with other owners when he found the prop on Monday. The flange
came off at the crank, now it is up to the NTSB to use all it's
resources to find the reason for that and report on it ASAP. I am sure
the manufacture is on top of it also. In the mean time I am doing my own
inspection of my aircraft.
I have removed my flange, inspected and made a decision as to what I
will do. My aircraft had a problem from a prop strike so what I found
might be related to the strike. I am replacing the flange and bolts
and installing per Jabriu instructions. I have talked to several
builders this week about the sealant they used. I was surprised that
some had used the "Red" and not the Green 620 called for in the
manual.The green is for loose threads (gaps) and high temp, which is
what we have at the flange to crank. As Doug said, It is very difficult
to remove the bolts with 620 and I think Nick has a replacement. I know
the sealant is very important and must not be left off. I also safety
wire the bolts. I would like to use aviation close tolerance bolts with
a grip on the flange but do not know if that is necessary yet. Too many
unknowns.
The electronic torque tester is use to measure the torque at removal for
NDI (non destructive inspection). Once tested the bolts must be removed
and flange reinstalled per Jabiru instructions
NTSB does not always investigate field crash sites. A Phoenix
experimental with 2 deaths last year was passed to the FAA.
We should talk about how we would react to any emergency and what to do
to make sure our aircraft are safe. All crashes become training lessons.
I will share what I am doing to my aircraft but please remember it will
be my opinion and best judgment. I have found three items with the
flange and mounting I would like to improve on but still do not know if
it is necessary. The NTSB report will help and will be critical in
making any decisions. I do not know anything about Australian aviation
hardware provided on the engine. I must learn. I always prefer to use
aviation bolts whenever possible and will be trying to find some with a
grip to match the flange but it might have to be a special order and
cost prohibited. Also, as of now with all the 3300 engines flying I have
not heard of a problem with the hardware or the installation procedures?
Has this ever happened before?
I do not want to fix something that is not broke but do like to make
things better and safer when possible. Without knowledge of standards
used I might be lowering them with different bolts.
Brian, very good advice also.
Thanks everyone, Johnny
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fatal Lightning Aircraft Crash |
Yes, I to say thanks to Doug and Johnny for there very good points, If I
may pickup on one of Dougs points of bolt length.
I to took off my flange and found that there was only 0.310" on bolt
protruding past the flange and into the crankshaft. Can I ask? Is this
enough for a 3/8 " dia. bolt? If my memory serves me right I though
there was some rule for penetration of a bolt of 1 & 1/2 times the
diameter of the bolt. I did replace mine with 1" bolts. It is only my
option, it just didn't look like enough bolt to me, I just had to say
something.
Peter Disher
----- Original Message -----
From: Johnny Thompson
To: lightning-list@matronics.com
Sent: Saturday, June 07, 2008 12:31 PM
Subject: Re: Lightning-List: Fatal Lightning Aircraft Crash
Thanks Doug, good points
I agree with you. I am and will continue to inspect my aircraft while
thinking of this accident. I know everyone is being considerate and not
talking about what Jerry did or did not do after the prop left. That is
the only thing I was really concerned about. This was a terrible
accident and has been hard on all of us, especially Greg and Crystal
Hobbs.
I know some of what happened, I was at the crash site Sunday and at
Greg's with other owners when he found the prop on Monday. The flange
came off at the crank, now it is up to the NTSB to use all it's
resources to find the reason for that and report on it ASAP. I am sure
the manufacture is on top of it also. In the mean time I am doing my own
inspection of my aircraft.
I have removed my flange, inspected and made a decision as to what I
will do. My aircraft had a problem from a prop strike so what I found
might be related to the strike. I am replacing the flange and bolts
and installing per Jabriu instructions. I have talked to several
builders this week about the sealant they used. I was surprised that
some had used the "Red" and not the Green 620 called for in the
manual.The green is for loose threads (gaps) and high temp, which is
what we have at the flange to crank. As Doug said, It is very difficult
to remove the bolts with 620 and I think Nick has a replacement. I know
the sealant is very important and must not be left off. I also safety
wire the bolts. I would like to use aviation close tolerance bolts with
a grip on the flange but do not know if that is necessary yet. Too many
unknowns.
The electronic torque tester is use to measure the torque at removal
for NDI (non destructive inspection). Once tested the bolts must be
removed and flange reinstalled per Jabiru instructions
NTSB does not always investigate field crash sites. A Phoenix
experimental with 2 deaths last year was passed to the FAA.
We should talk about how we would react to any emergency and what to
do to make sure our aircraft are safe. All crashes become training
lessons.
I will share what I am doing to my aircraft but please remember it
will be my opinion and best judgment. I have found three items with the
flange and mounting I would like to improve on but still do not know if
it is necessary. The NTSB report will help and will be critical in
making any decisions. I do not know anything about Australian aviation
hardware provided on the engine. I must learn. I always prefer to use
aviation bolts whenever possible and will be trying to find some with a
grip to match the flange but it might have to be a special order and
cost prohibited. Also, as of now with all the 3300 engines flying I have
not heard of a problem with the hardware or the installation procedures?
Has this ever happened before?
I do not want to fix something that is not broke but do like to make
things better and safer when possible. Without knowledge of standards
used I might be lowering them with different bolts.
Brian, very good advice also.
Thanks everyone, Johnny
-------------------------------------------------------------------------
-----
Checked by AVG.
6/6/2008 5:48 PM
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|