Today's Message Index:
----------------------
1. 07:54 AM - Re: Lightning trim tabs (Tex Mantell)
2. 07:57 AM - Re: Lightning trim tabs#2 (Tex Mantell)
3. 05:02 PM - Re: Re: Lightning trim tabs#2 (GARY PENNINGTON)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning trim tabs |
I will try to send pictures seperatly, I cant reduce the size.
----- Original Message -----
From: Selwyn Ellis
To: wb2ssj@frontiernet.net
Sent: Tuesday, September 23, 2008 6:49 AM
Subject: Lightning trim tabs
Hi Tex,
I'm in the early stages of building kit 66 and have been exchanging
emails with Nick at Arion discussing the trim tab. It seems a good idea
but its appearance is just a bit crude compared to the rest of the
airframe. Nick tells me that you have changed the design and cut the
trim tab out of the elevator instead of using the add on metal part. He
gave me your email and suggested I contact you about it so here I am.
I would appreciate any information or photos you care to share on what
you have done with your trim tab and how it has turned out. What did
you do to provide a solid attachment for the hinge line? I presume you
had to fashion some sort of structure to support the trailing edge skins
and the leading edge of the tab.
Cheers,
Selwyn
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning trim tabs#2 |
the other picture.
----- Original Message -----
From: Selwyn Ellis
To: wb2ssj@frontiernet.net
Sent: Tuesday, September 23, 2008 6:49 AM
Subject: Lightning trim tabs
Hi Tex,
I'm in the early stages of building kit 66 and have been exchanging
emails with Nick at Arion discussing the trim tab. It seems a good idea
but its appearance is just a bit crude compared to the rest of the
airframe. Nick tells me that you have changed the design and cut the
trim tab out of the elevator instead of using the add on metal part. He
gave me your email and suggested I contact you about it so here I am.
I would appreciate any information or photos you care to share on what
you have done with your trim tab and how it has turned out. What did
you do to provide a solid attachment for the hinge line? I presume you
had to fashion some sort of structure to support the trailing edge skins
and the leading edge of the tab.
Cheers,
Selwyn
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning trim tabs#2 |
Hello Tex
I just viewed your email about the trim tab you built. Very Cool! It
appears that you cut a section out of the trailing edge of the Elevator
and bonded the hinge into the end sections. Is that correct? I like your
craftsmanship. Very straight cuts! Please share your technique. I wish
I had seen this about four weeks ago.
Thank Tex
Gary Pennington
----- Original Message -----
From: Tex Mantell<mailto:wb2ssj@frontiernet.net>
To: selwyn@ellisworks.com.au<mailto:selwyn@ellisworks.com.au> ;
lightning List<mailto:Lightning-list@matronics.com>
Sent: Tuesday, September 23, 2008 7:55 AM
Subject: Lightning-List: Re: Lightning trim tabs#2
the other picture.
----- Original Message -----
From: Selwyn Ellis<mailto:selwyn@ellisworks.com.au>
To: wb2ssj@frontiernet.net<mailto:wb2ssj@frontiernet.net>
Sent: Tuesday, September 23, 2008 6:49 AM
Subject: Lightning trim tabs
Hi Tex,
I'm in the early stages of building kit 66 and have been exchanging
emails with Nick at Arion discussing the trim tab. It seems a good idea
but its appearance is just a bit crude compared to the rest of the
airframe. Nick tells me that you have changed the design and cut the
trim tab out of the elevator instead of using the add on metal part. He
gave me your email and suggested I contact you about it so here I am.
I would appreciate any information or photos you care to share on
what you have done with your trim tab and how it has turned out. What
did you do to provide a solid attachment for the hinge line? I presume
you had to fashion some sort of structure to support the trailing edge
skins and the leading edge of the tab.
Cheers,
Selwyn
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|