---------------------------------------------------------- Lightning-List Digest Archive --- Total Messages Posted Sat 11/08/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:24 AM - Fitting Windows (Colin J. Kennedy) 2. 10:32 AM - Re: Fitting Windows (IFLYSMODEL@AOL.COM) 3. 11:32 AM - Re: Fitting Windows (Mark Stauffer) 4. 12:36 PM - Kitlog - Wayne & Mark Patterson (Colin J. Kennedy) 5. 04:30 PM - Re: Fitting Windows (n5pb@aol.com) ________________________________ Message 1 _____________________________________ Time: 10:24:05 AM PST US From: "Colin J. Kennedy" Subject: Lightning-List: Fitting Windows When fitting the side windows, now that they are pre-shaped, is it still necessary to drill and bolt them, or is the epoxy bond enough to hold them in place after it is cured? Colin K. OK Lightning # 52 under construction. http://www.mykitlog.com/cojaken ________________________________ Message 2 _____________________________________ Time: 10:32:29 AM PST US From: IFLYSMODEL@AOL.COM Subject: Re: Lightning-List: Fitting Windows Hey Colin: I put mine in with about 6 screws to hold them in place until the epoxy set up. Then took the screws out and faired them in with filler. Lynn Nelsen In a message dated 11/8/2008 1:24:46 P.M. Eastern Standard Time, cjk129@cox.net writes: --> Lightning-List message posted by: "Colin J. Kennedy" When fitting the side windows, now that they are pre-shaped, is it still necessary to drill and bolt them, or is the epoxy bond enough to hold them in place after it is cured? Colin K. OK Lightning # 52 under construction. http://www.mykitlog.com/cojaken **************AOL Search: Your one stop for directions, recipes and all other Holiday needs. Search Now. -aol-search/?ncid=emlcntussear00000001) ________________________________ Message 3 _____________________________________ Time: 11:32:42 AM PST US From: "Mark Stauffer" Subject: RE: Lightning-List: Fitting Windows Colin, Epoxy alone will hold the windows in. When using screws make a keeper that will hold the window in place and screw through the fuselage, NOT the window. Mark -----Original Message----- From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com]On Behalf Of Colin J. Kennedy Sent: Saturday, November 08, 2008 12:24 PM Subject: Lightning-List: Fitting Windows When fitting the side windows, now that they are pre-shaped, is it still necessary to drill and bolt them, or is the epoxy bond enough to hold them in place after it is cured? Colin K. OK Lightning # 52 under construction. http://www.mykitlog.com/cojaken ________________________________ Message 4 _____________________________________ Time: 12:36:03 PM PST US From: "Colin J. Kennedy" Subject: Lightning-List: Kitlog - Wayne & Mark Patterson Having got started again, I went to my Kitlog and came across Wayne & Mark Patterson's Kitlog. Highly recommended reading: http://www.mykitlog.com/users/index.php?user=Marvin4242&project=600 Thank you Mark and Wayne for making the effort to shgare your experience with the rest of us! Colin K. OK Lightning # 52 under construction. http://www.mykitlog.com/cojaken ________________________________ Message 5 _____________________________________ Time: 04:30:53 PM PST US Subject: Re: Lightning-List: Fitting Windows From: n5pb@aol.com Colin, Here's a pic of what Mark is talking about. Good luck. Paul "Bear" Bryant -----Original Message----- From: Mark Stauffer Sent: Sat, 8 Nov 2008 2:28 pm Subject: RE: Lightning-List: Fitting Windows Colin, Epoxy alone will hold the windows in. When using screws make a keeper that will hold the window in place and screw through the fuselage, NOT the window. Mark -----Original Message----- From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com]On Behalf Of Colin J. Kennedy Sent: Saturday, November 08, 2008 12:24 PM Subject: Lightning-List: Fitting Windows When fitting the side windows, now that they are pre-shaped, is it still necessary to drill and bolt them, or is the epoxy bond enough to hold them in place after it is cured? Colin K. OK Lightning # 52 under construction. http://www.mykitlog.com/cojaken ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lightning-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lightning-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lightning-list Browse Digests http://www.matronics.com/digest/lightning-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.