---------------------------------------------------------- Lightning-List Digest Archive --- Total Messages Posted Sun 02/22/09: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:32 AM - Re: Flight to Lake Havasu (Brian Proett) 2. 04:48 PM - Re: Flight to Lake Havasu (GARY PENNINGTON) ________________________________ Message 1 _____________________________________ Time: 09:32:30 AM PST US From: "Brian Proett" Subject: RE: Lightning-List: Flight to Lake Havasu A little gasoline trivia - Since I am in the industry I thought that I would let you know what I know about crudes and gasolines. As a starter I am not in the refining business. I am in the E&P (Exploration and Production) end and I usually lose interest after the stuff comes out of the ground. Firstly, crude varies dramatically from condensates that can be used directly in your car to heavy oil that is the consistency of peanut butter. As we are turning more to alternate crudes we are producing more peanut butter and less light sweet stuff. Refineries must set up for the type of crude being run and what product is being produced. Two things that are not widely known: There are only a few places that oil is refined and the product is transported across the country via pipelines. Here is the thing, all companies use the same pipeline system. So at the other end you don't really know who produced the product. The product must be on spec before it enters the pipeline and the specs are very tightly controlled. The difference between ExxonMobil and Chevron is not the base product but the additives and blending at the terminals. Secondly, I can count at least 18 formulations of gasoline that are used around the country. Summer vs. winter, high density traffic areas (EPA reformulated e.g. Ca and other major population centers) and high altitude areas. Each of these carries three grades of fuels. Do the math. The gasoline needs to have the proper octane, and it needs to have the proper Reid vapor pressure, or RVP. Buz referred to the fuels vapor pressure are an important factor. Fuels with a high RVP will begin to boil if your tank is sitting there in 100+ F heat. Not Good. This is the difference between summer and winter blends even when the octane remains the same. As you all know atmospheric pressure is 14.7 pounds/in2 at sea level and the pressure decreases with altitude. When the atmospheric pressure is less than the RVP the fuel will begin to boil. This occurs in a carburetor earlier with the lower pressure (Vapor Lock). The EPA has declared that summer gasoline blends may not exceed 7.8 psi in some locations, and 9.0 psi in others. I don't know how high the cheaper winter blends can go. Now you know why the gasoline is more expensive in the summer. The octane and RVP is controlled by the blend. Ok, back to the refineries. Gasoline is composed of many different hydrocarbons. Crude oil enters a refinery, and is processed through various units before being blended into gasoline. A refinery may have a fluid catalytic cracker (FCC), an alkylate unit, and a reformer, each of which produces gasoline blending components. Alkylate gasoline, for example, is valuable because it has a very high octane, and can be used to produce high-octane (and higher value) blends. Light straight run gasoline is the least processed stream. It is cheap to produce, but it has a low octane. The refinery mixes these components together to meet the product specifications. The RVP is controlled by the butane percentage. All the components vary but Butane has a RVP of 52. This is much higher than the other components so the summer blends only contain about 2% butane. So what does this mean for aviation use of gasolines that are spec'ed for use in ground based autos. Well it depends on the engine and fuel delivery system. There is a constant balance between the auto manufactures, environmental issues and commerciality. Engines have changed, these changes have resulted in changes fuel specs. It has all gotten more complex and the spec have gotten more stringent. There is an effort to create a new fuel spec for Avgas with out lead. The primary issue is not the ability to come up with a fuel but one that is compatible with the old engine designs and installed base. Personally, I would have more faith in a fuel that is specifically designed for the engine that I intend to put it in. If you know the fuel specs and the manufacture specs then you should be good to go. Brian P. _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of N1BZRich@aol.com Sent: Saturday, February 21, 2009 3:02 AM Subject: Re: Lightning-List: Flight to Lake Havasu In a message dated 2/5/2009 7:24:04 P.M. Eastern Standard Time, pennington@q.com writes: I don't know how to explain this, but as I noted before, my engine burns less Premium Auto Fuel per hour than AvGas. Gary, I just re read your Lake Havasu flight report and this time actually noticed your statement / question (above) about the difference of auto gas verses AvGas fuel burns. And the fact that you got slightly better fuel burns and thus used less fuel when you were using auto gas. The reason for this is that auto gas is more volatile than avgas, and because of this you may actually see slightly lower fuel usages. There can be some downsides, such as higher vaporization, a higher potential for vapor lock, and perhaps more carburetor icing. Another thing to remember is that auto gas has looser manufacturing specifications and quality control is less stringent, so actual quality and performance may vary widely from load to load. Hope this helps. Blue Skies, Buz _____ Need a job? Find an employment agency near you. ________________________________ Message 2 _____________________________________ Time: 04:48:49 PM PST US From: "GARY PENNINGTON" Subject: Re: Lightning-List: Flight to Lake Havasu Hello Brian You obviously know your gas. Although, I wasn't able to determine any significant difference between auto fuel and avgas from your response. Thanks for your help. Gary Pennington ----- Original Message ----- From: Brian Proett To: lightning-list@matronics.com Sent: Sunday, February 22, 2009 10:31 AM Subject: RE: Lightning-List: Flight to Lake Havasu A little gasoline trivia - Since I am in the industry I thought that I would let you know what I know about crudes and gasolines. As a starter I am not in the refining business. I am in the E&P (Exploration and Production) end and I usually lose interest after the stuff comes out of the ground. Firstly, crude varies dramatically from condensates that can be used directly in your car to heavy oil that is the consistency of peanut butter. As we are turning more to alternate crudes we are producing more peanut butter and less light sweet stuff. Refineries must set up for the type of crude being run and what product is being produced. Two things that are not widely known: There are only a few places that oil is refined and the product is transported across the country via pipelines. Here is the thing, all companies use the same pipeline system. So at the other end you don't really know who produced the product. The product must be on spec before it enters the pipeline and the specs are very tightly controlled. The difference between ExxonMobil and Chevron is not the base product but the additives and blending at the terminals. Secondly, I can count at least 18 formulations of gasoline that are used around the country. Summer vs. winter, high density traffic areas (EPA reformulated e.g. Ca and other major population centers) and high altitude areas. Each of these carries three grades of fuels. Do the math. The gasoline needs to have the proper octane, and it needs to have the proper Reid vapor pressure, or RVP. Buz referred to the fuels vapor pressure are an important factor. Fuels with a high RVP will begin to boil if your tank is sitting there in 100+ F heat. Not Good. This is the difference between summer and winter blends even when the octane remains the same. As you all know atmospheric pressure is 14.7 pounds/in2 at sea level and the pressure decreases with altitude. When the atmospheric pressure is less than the RVP the fuel will begin to boil. This occurs in a carburetor earlier with the lower pressure (Vapor Lock). The EPA has declared that summer gasoline blends may not exceed 7.8 psi in some locations, and 9.0 psi in others. I don't know how high the cheaper winter blends can go. Now you know why the gasoline is more expensive in the summer. The octane and RVP is controlled by the blend. Ok, back to the refineries. Gasoline is composed of many different hydrocarbons. Crude oil enters a refinery, and is processed through various units before being blended into gasoline. A refinery may have a fluid catalytic cracker (FCC), an alkylate unit, and a reformer, each of which produces gasoline blending components. Alkylate gasoline, for example, is valuable because it has a very high octane, and can be used to produce high-octane (and higher value) blends. Light straight run gasoline is the least processed stream. It is cheap to produce, but it has a low octane. The refinery mixes these components together to meet the product specifications. The RVP is controlled by the butane percentage. All the components vary but Butane has a RVP of 52. This is much higher than the other components so the summer blends only contain about 2% butane. So what does this mean for aviation use of gasolines that are spec'ed for use in ground based autos. Well it depends on the engine and fuel delivery system. There is a constant balance between the auto manufactures, environmental issues and commerciality. Engines have changed, these changes have resulted in changes fuel specs. It has all gotten more complex and the spec have gotten more stringent. There is an effort to create a new fuel spec for Avgas with out lead. The primary issue is not the ability to come up with a fuel but one that is compatible with the old engine designs and installed base. Personally, I would have more faith in a fuel that is specifically designed for the engine that I intend to put it in. If you know the fuel specs and the manufacture specs then you should be good to go. Brian P. ------------------------------------------------------------------------- ----- From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of N1BZRich@aol.com Sent: Saturday, February 21, 2009 3:02 AM To: lightning-list@matronics.com Subject: Re: Lightning-List: Flight to Lake Havasu In a message dated 2/5/2009 7:24:04 P.M. Eastern Standard Time, pennington@q.com writes: I don't know how to explain this, but as I noted before, my engine burns less Premium Auto Fuel per hour than AvGas. Gary, I just re read your Lake Havasu flight report and this time actually noticed your statement / question (above) about the difference of auto gas verses AvGas fuel burns. And the fact that you got slightly better fuel burns and thus used less fuel when you were using auto gas. The reason for this is that auto gas is more volatile than avgas, and because of this you may actually see slightly lower fuel usages. There can be some downsides, such as higher vaporization, a higher potential for vapor lock, and perhaps more carburetor icing. Another thing to remember is that auto gas has looser manufacturing specifications and quality control is less stringent, so actual quality and performance may vary widely from load to load. Hope this helps. Blue Skies, Buz ------------------------------------------------------------------------- ----- Need a job? Find an employment agency near you. http://www.matronics.com/Navigator?Lightning-Listhttp://forums.matronics. comhttp://www.matronics.com/contribution http://www.matronics.com/Navigator?Lightning-List http://www.matronics.com/contribution ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lightning-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lightning-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lightning-list Browse Digests http://www.matronics.com/digest/lightning-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.