---------------------------------------------------------- Lightning-List Digest Archive --- Total Messages Posted Wed 04/28/10: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:54 AM - Re: Lightning Panel blank. (flylightning) 2. 06:44 AM - Re: Lightning Panel blank. (flylightning) 3. 07:35 AM - Re: Lightning Panel blank. () 4. 08:04 AM - Re: Lightning Panel blank. (Bernard Melendez, Jr.) 5. 08:45 AM - Re: Lightning Panel blank. (Bernard Melendez, Jr.) 6. 09:04 AM - Re: Lightning Panel blank. (Mefford, Walt) 7. 10:53 AM - Re: Lightning Panel blank. (flylightning) ________________________________ Message 1 _____________________________________ Time: 05:54:22 AM PST US From: "flylightning" Subject: RE: Lightning-List: Lightning Panel blank. Looks like and e-viewer file sorry, I will get the Cad drawing. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Tuesday, April 27, 2010 5:03 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC http://www.matronics.com/Navigator?Lightning-List http://www.matronics.com/contribution ________________________________ Message 2 _____________________________________ Time: 06:44:46 AM PST US From: "flylightning" Subject: RE: Lightning-List: Lightning Panel blank. Bernardo, I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer because I don't have CAD here.So should be able with an 04 or newer edition. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylightning Sent: Wednesday, April 28, 2010 7:55 AM Subject: RE: Lightning-List: Lightning Panel blank. Looks like and e-viewer file sorry, I will get the Cad drawing. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Tuesday, April 27, 2010 5:03 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC http://www.matronics.com/Navigator?Lightning-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 3 _____________________________________ Time: 07:35:33 AM PST US From: Subject: RE: Lightning-List: Lightning Panel blank. It is a 2004 version file. I opened it in AutoCAD and checked the version. Earnie Fontenot efontenot3@cox.net ---- flylightning wrote: > Bernardo, > > > > I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer > because I don't have CAD here.So should be able with an 04 or newer edition. > > > > Nick > > > > _____ > > From: owner-lightning-list-server@matronics.com > [mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylightning > Sent: Wednesday, April 28, 2010 7:55 AM > To: lightning-list@matronics.com > Subject: RE: Lightning-List: Lightning Panel blank. > > > > Looks like and e-viewer file sorry, I will get the Cad drawing. > > > > Nick > > > > _____ > > From: owner-lightning-list-server@matronics.com > [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard > Melendez, Jr. > Sent: Tuesday, April 27, 2010 5:03 PM > To: lightning-list@matronics.com > Subject: Re: Lightning-List: Lightning Panel blank. > > > > > Hi Nick, > Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD > 2000 loaded on my computer but cannot open it, says it's incompatible. It > was nice meeting you guys at Sun-n-Fun. > Regards, > > Bernardo Melendez, Realtor > Professional Real Estate Inspector > > ALIANZA INSPECTIONS > > Mobile: 281.536.9052 > > Bernardo@AlianzaInspections.com > > > > --- On Tue, 4/27/10, flylightning wrote: > > > From: flylightning > Subject: Lightning-List: Lightning Panel blank. > To: lightning-list@matronics.com > Date: Tuesday, April 27, 2010, 3:00 PM > > Group, > > > > Panel blank and fuel console blank. Remember the panel fits into a molded > pod not a flat straight back face. In general items like radios and > autopilot must be mounted lower in the panel. > > Remember the Canopy tip up brackets as well. The nicest panel in the world > wont fit if you forget about those tip up supports and the back of your EFIS > or some connector runs into them. > > > > Nick Otterback > > Arion Aircraft, LLC > > > > http://www.matronics.com/Navigator?Lightning-List > > http://forums.matronics.com > > http://www.matronics.com/contribution ________________________________ Message 4 _____________________________________ Time: 08:04:40 AM PST US From: "Bernard Melendez, Jr." Subject: RE: Lightning-List: Lightning Panel blank. Thanks, Nick. Regards, Bernardo-Melendez P.S. For your viewing pleasure, here's a pic of my current steed. --- On Wed, 4/28/10, flylightning wrote: From: flylightning Subject: RE: Lightning-List: Lightning Panel blank. =0A=0A=0A =0A =0A=0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0ALooks like and e-viewer file sorry, I will=0Aget the Cad drawing. =0A=0A - =0A=0ANick =0A=0A - =0A=0A=0A=0A=0A=0A=0A=0A=0A=0AFrom:=0Aowner-lightning-list-server@matronic s.com=0A[mailto:owner-lightning-list-server@matronics.com] On Behalf Of Ber nard Melendez, Jr. =0ASent: Tuesday, April 27, 2010 5:03=0APM =0ATo: lightning-list@matronics.com =0ASubject: Re: Lightning-List:=0ALightning Panel blank. =0A=0A=0A=0A - =0A=0A=0A =0A =0A Hi Nick, =0A Is this an AutoCAD file? And if it is, what version is it? I have Auto CAD=0A 2000 loaded on my computer but cannot open it, says it's incompatib le. It was=0A nice meeting you guys at Sun-n-Fun. =0A Regards, =0A =0A Bernardo-Melendez,=0A Realtor =0A Professional Real Estate Inspector =0A =0A =0A ALIANZA INSPECTIONS =0A =0A =0A Mobile:-- 281.536.9052 =0A =0A =0A Bernardo@AlianzaIn spections.com =0A =0A =0A =0A --- On Tue, 4/27/10, flylightning =0A wrote: =0A =0A From: flylightning =0A Subject: Lightning-List: Lightning Panel blank. =0A To: lightning-list@matronics.com =0A Date: Tuesday, April 27, 2010, 3:00 PM =0A =0A =0A Group, =0A - =0A Panel=0A blank and fuel console blank. Remember the panel fits into a molded pod not a=0A flat straight back face. In general items like radios and autopilot must be=0A mounted lower in the panel. =0A Remember=0A th e Canopy tip up brackets as well. The nicest panel in the world wont fit if =0A you forget about those tip up supports and the back of your EFIS or so me=0A connector runs into them. =0A - =0A Nick=0A Otterback =0A Ario n=0A Aircraft, LLC =0A =0A =0A =0A =0A=0A=0A - -http://www.matronic s.com/Navigator?Lightning-Listhttp://forums.matronics.comhttp://www.matroni cs.com/contribution - =0A=0A=0A=0A=0A=0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 08:45:15 AM PST US From: "Bernard Melendez, Jr." Subject: RE: Lightning-List: Lightning Panel blank. Nick, Don't worry about it, I'll get a copy eventually. As I've always understood it, AutoCAD newer versions should always be backwards compatible, all the way to V.10. Oh, well... Regards, Bernardo --- On Wed, 4/28/10, flylightning wrote: From: flylightning Subject: RE: Lightning-List: Lightning Panel blank. =0A=0A=0A =0A =0A=0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0ABernardo, =0A=0A =C2- =0A=0AI guess it is a CAD file from CAD2004, my=0Acomputer opens it as a e -viewer because I don=99t have CAD hereSo=0Ashould be able w ith an 04 or newer edition. =0A=0A =C2- =0A=0ANick =0A=0A =C2- =0A=0A =0A=0A=0A=0A=0A=0A=0A=0AFrom: owner-lightning-list-server@matronics.com=0A[ mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylightning =0ASent: Wednesday, April 28, 2010=0A7:55 AM =0ATo: lightning-list@matronics.com =0ASubject: RE: Lightning-List:=0ALightning Panel blank. =0A=0A=0A=0A =C2 - =0A=0ALooks like and e-viewer file sorry, I will=0Aget the Cad drawing. =0A=0A =C2- =0A=0ANick =0A=0A =C2- =0A=0A=0A=0A=0A=0A=0A=0A=0A=0AFrom: =0Aowner-lightning-list-server@matronics.com=0A[mailto:owner-lightning-list -server@matronics.com] On Behalf Of Bernard Melendez, Jr. =0ASent: Tuesday, April 27, 2010 5:03=0APM =0ATo: lightning-list@matronics.com =0ASubject: Re: Lightning-List:=0ALightning Panel blank. =0A=0A=0A=0A =C2 - =0A=0A=0A =0A =0A Hi Nick, =0A Is this an AutoCAD file? And if it is, what version is it? I have Auto CAD=0A 2000 loaded on my computer but cannot open it, says it's incompatib le. It was=0A nice meeting you guys at Sun-n-Fun. =0A Regards, =0A =0A Bernardo=C2-Melendez,=0A Realtor =0A Professional Real Estate Inspector =0A =0A =0A ALIANZA INSPECTIONS =0A =0A =0A Mobile:=C2-=C2- 281.536.9052 =0A =0A =0A Bernardo@Ali anzaInspections.com =0A =0A =0A =0A --- On Tue, 4/27/10, flylightning =0A wrote: =0A =0A From: flylightning =0A Subject: Lightning-List: Lightning Panel blank. =0A To: lightning-list@matronics.com =0A Date: Tuesday, April 27, 2010, 3:00 PM =0A =0A =0A Group, =0A =C2 - =0A Panel=0A blank and fuel console blank. Remember the panel fits in to a molded pod not a=0A flat straight back face. In general items like ra dios and autopilot must be=0A mounted lower in the panel. =0A Remember=0A the Canopy tip up brackets as well. The nicest panel in the world wont fi t if=0A you forget about those tip up supports and the back of your EFIS o r some=0A connector runs into them. =0A =C2- =0A Nick=0A Otterback =0A Arion=0A Aircraft, LLC =0A =0A =0A =0A =0A=0A=0A =C2- =C2-http ://www.matronics.com/Navigator?Lightning-List =C2-http://forums.matronics .com =C2-http://www.matronics.com/contribution =0A=0A=0A=0A=0A=0A=0A=0A ________________________________ Message 6 _____________________________________ Time: 09:04:33 AM PST US From: "Mefford, Walt" Subject: RE: Lightning-List: Lightning Panel blank. Try .DXF format. This format will transfer to quite a variety of CAD packages other than AutoCAD. Walt Mefford N881WP From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Wednesday, April 28, 2010 8:42 AM Subject: RE: Lightning-List: Lightning Panel blank. Nick, Don't worry about it, I'll get a copy eventually. As I've always understood it, AutoCAD newer versions should always be backwards compatible, all the way to V.10. Oh, well... Regards, Bernardo --- On Wed, 4/28/10, flylightning wrote: From: flylightning Subject: RE: Lightning-List: Lightning Panel blank. Bernardo, I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer because I don=99t have CAD hereSo should be able with an 04 or newer edition. Nick ________________________________ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylightning Sent: Wednesday, April 28, 2010 7:55 AM Subject: RE: Lightning-List: Lightning Panel blank. Looks like and e-viewer file sorry, I will get the Cad drawing. Nick ________________________________ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Tuesday, April 27, 2010 5:03 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC http://www.matronics.com/Navigator?Lightning-List http://forums.matronics.com http://www.matronics.com/contribution http://www.matronics.com/Navigator?Lightning-lank" href="http://forums.matronics.com">http://forums.matronics.com<=== ====== ------------------------------------------------------------------------- ------- This e-mail and any attachments may contain confidential material for the sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please contact the sender and delete all copies. Thank you for your cooperation. ________________________________ Message 7 _____________________________________ Time: 10:53:46 AM PST US From: "flylightning" Subject: RE: Lightning-List: Lightning Panel blank. Bernardo, Very cool looks like a little fighter..like the paint job too. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Wednesday, April 28, 2010 10:01 AM Subject: RE: Lightning-List: Lightning Panel blank. Thanks, Nick. Regards, Bernardo Melendez P.S. For your viewing pleasure, here's a pic of my current steed. --- On Wed, 4/28/10, flylightning wrote: From: flylightning Subject: RE: Lightning-List: Lightning Panel blank. Looks like and e-viewer file sorry, I will get the Cad drawing. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Tuesday, April 27, 2010 5:03 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC http://www.matronics.com/Navigator?Lightning-List http://forums.matronics.com http://www.matronics.com/contribution ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lightning-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lightning-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lightning-list Browse Digests http://www.matronics.com/digest/lightning-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.