Today's Message Index:
----------------------
1. 02:00 AM - Re: Lightning Panel blank. (Johnny Thompson)
2. 08:09 AM - Re: Lightning Panel blank. (flylightning)
3. 09:54 AM - Lightning Panel blank. Acad 2000 version ()
4. 12:52 PM - Re: Lightning Panel blank. (Bernard Melendez, Jr.)
5. 02:13 PM - Re: fuel (Dave)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Lightning Panel blank. |
Earnie
Since you can open it could you save it in Auto Cad 2000 and send it to the
group. Thanks Johnny Thompson
----- Original Message -----
From: <efontenot3@cox.net>
Sent: Wednesday, April 28, 2010 7:24 AM
Subject: RE: Lightning-List: Lightning Panel blank.
>
> It is a 2004 version file. I opened it in AutoCAD and checked the version.
>
> Earnie Fontenot
> efontenot3@cox.net
>
> ---- flylightning <info@flylightning.net> wrote:
>> Bernardo,
>>
>>
>>
>> I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer
>> because I don't have CAD here.So should be able with an 04 or newer
>> edition.
>>
>>
>>
>> Nick
>>
>>
>>
>> _____
>>
>> From: owner-lightning-list-server@matronics.com
>> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of
>> flylightning
>> Sent: Wednesday, April 28, 2010 7:55 AM
>> To: lightning-list@matronics.com
>> Subject: RE: Lightning-List: Lightning Panel blank.
>>
>>
>>
>> Looks like and e-viewer file sorry, I will get the Cad drawing.
>>
>>
>>
>> Nick
>>
>>
>>
>> _____
>>
>> From: owner-lightning-list-server@matronics.com
>> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard
>> Melendez, Jr.
>> Sent: Tuesday, April 27, 2010 5:03 PM
>> To: lightning-list@matronics.com
>> Subject: Re: Lightning-List: Lightning Panel blank.
>>
>>
>>
>>
>> Hi Nick,
>> Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD
>> 2000 loaded on my computer but cannot open it, says it's incompatible. It
>> was nice meeting you guys at Sun-n-Fun.
>> Regards,
>>
>> Bernardo Melendez, Realtor
>> Professional Real Estate Inspector
>>
>> ALIANZA INSPECTIONS
>>
>> Mobile: 281.536.9052
>>
>> Bernardo@AlianzaInspections.com <http://alianzainspections.com>
>>
>>
>>
>> --- On Tue, 4/27/10, flylightning <info@flylightning.net> wrote:
>>
>>
>> From: flylightning <info@flylightning.net>
>> Subject: Lightning-List: Lightning Panel blank.
>> To: lightning-list@matronics.com
>> Date: Tuesday, April 27, 2010, 3:00 PM
>>
>> Group,
>>
>>
>>
>> Panel blank and fuel console blank. Remember the panel fits into a molded
>> pod not a flat straight back face. In general items like radios and
>> autopilot must be mounted lower in the panel.
>>
>> Remember the Canopy tip up brackets as well. The nicest panel in the
>> world
>> wont fit if you forget about those tip up supports and the back of your
>> EFIS
>> or some connector runs into them.
>>
>>
>>
>> Nick Otterback
>>
>> Arion Aircraft, LLC
>>
>>
>>
>> http://www.matronics.com/Navigator?Lightning-List
>>
>> http://forums.matronics.com
>>
>> http://www.matronics.com/contribution
>
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lightning Panel blank. |
Bernardo,
Very cool looks like a little fighter..like the paint job too.
Nick
_____
From: owner-lightning-list-server@matronics.com
[mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard
Melendez, Jr.
Sent: Wednesday, April 28, 2010 10:01 AM
Subject: RE: Lightning-List: Lightning Panel blank.
Thanks, Nick.
Regards,
Bernardo Melendez
P.S. For your viewing pleasure, here's a pic of my current steed.
--- On Wed, 4/28/10, flylightning <info@flylightning.net> wrote:
From: flylightning <info@flylightning.net>
Subject: RE: Lightning-List: Lightning Panel blank.
Looks like and e-viewer file sorry, I will get the Cad drawing.
Nick
_____
From: owner-lightning-list-server@matronics.com
[mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard
Melendez, Jr.
Sent: Tuesday, April 27, 2010 5:03 PM
Subject: Re: Lightning-List: Lightning Panel blank.
Hi Nick,
Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD
2000 loaded on my computer but cannot open it, says it's incompatible. It
was nice meeting you guys at Sun-n-Fun.
Regards,
Bernardo Melendez, Realtor
Professional Real Estate Inspector
ALIANZA INSPECTIONS
Mobile: 281.536.9052
Bernardo@AlianzaInspections.com <http://alianzainspections.com>
--- On Tue, 4/27/10, flylightning <info@flylightning.net> wrote:
From: flylightning <info@flylightning.net>
Subject: Lightning-List: Lightning Panel blank.
Group,
Panel blank and fuel console blank. Remember the panel fits into a molded
pod not a flat straight back face. In general items like radios and
autopilot must be mounted lower in the panel.
Remember the Canopy tip up brackets as well. The nicest panel in the world
wont fit if you forget about those tip up supports and the back of your EFIS
or some connector runs into them.
Nick Otterback
Arion Aircraft, LLC
http://www.matronics.com/Navigator?Lightning-List
http://forums.matronics.com
http://www.matronics.com/contribution
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lightning Panel blank. Acad 2000 version |
This should be in AutoCAD 2000 format.
Earnie Fontenot
---- Johnny Thompson <8wn@comcast.net> wrote:
>
> Earnie
> Since you can open it could you save it in Auto Cad 2000 and send it to the
> group. Thanks Johnny Thompson
> ----- Original Message -----
> From: <efontenot3@cox.net>
> To: <lightning-list@matronics.com>
> Sent: Wednesday, April 28, 2010 7:24 AM
> Subject: RE: Lightning-List: Lightning Panel blank.
>
>
> >
> > It is a 2004 version file. I opened it in AutoCAD and checked the version.
> >
> > Earnie Fontenot
> > efontenot3@cox.net
> >
> > ---- flylightning <info@flylightning.net> wrote:
> >> Bernardo,
> >>
> >>
> >>
> >> I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer
> >> because I don't have CAD here.So should be able with an 04 or newer
> >> edition.
> >>
> >>
> >>
> >> Nick
> >>
> >>
> >>
> >> _____
> >>
> >> From: owner-lightning-list-server@matronics.com
> >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of
> >> flylightning
> >> Sent: Wednesday, April 28, 2010 7:55 AM
> >> To: lightning-list@matronics.com
> >> Subject: RE: Lightning-List: Lightning Panel blank.
> >>
> >>
> >>
> >> Looks like and e-viewer file sorry, I will get the Cad drawing.
> >>
> >>
> >>
> >> Nick
> >>
> >>
> >>
> >> _____
> >>
> >> From: owner-lightning-list-server@matronics.com
> >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard
> >> Melendez, Jr.
> >> Sent: Tuesday, April 27, 2010 5:03 PM
> >> To: lightning-list@matronics.com
> >> Subject: Re: Lightning-List: Lightning Panel blank.
> >>
> >>
> >>
> >>
> >> Hi Nick,
> >> Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD
> >> 2000 loaded on my computer but cannot open it, says it's incompatible. It
> >> was nice meeting you guys at Sun-n-Fun.
> >> Regards,
> >>
> >> Bernardo Melendez, Realtor
> >> Professional Real Estate Inspector
> >>
> >> ALIANZA INSPECTIONS
> >>
> >> Mobile: 281.536.9052
> >>
> >> Bernardo@AlianzaInspections.com <http://alianzainspections.com>
> >>
> >>
> >>
> >> --- On Tue, 4/27/10, flylightning <info@flylightning.net> wrote:
> >>
> >>
> >> From: flylightning <info@flylightning.net>
> >> Subject: Lightning-List: Lightning Panel blank.
> >> To: lightning-list@matronics.com
> >> Date: Tuesday, April 27, 2010, 3:00 PM
> >>
> >> Group,
> >>
> >>
> >>
> >> Panel blank and fuel console blank. Remember the panel fits into a molded
> >> pod not a flat straight back face. In general items like radios and
> >> autopilot must be mounted lower in the panel.
> >>
> >> Remember the Canopy tip up brackets as well. The nicest panel in the
> >> world
> >> wont fit if you forget about those tip up supports and the back of your
> >> EFIS
> >> or some connector runs into them.
> >>
> >>
> >>
> >> Nick Otterback
> >>
> >> Arion Aircraft, LLC
> >>
> >>
> >>
> >> http://www.matronics.com/Navigator?Lightning-List
> >>
> >> http://forums.matronics.com
> >>
> >> http://www.matronics.com/contribution
> >
> >
> >
> >
> >
> >
>
>
>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Lightning Panel blank. |
Sexy looking bird, Walt. I like the silver on yellow. Congrats on a fine ex
ample. Hope mine looks as good when I build and finish it.
Thanks for the info on the file.
Regards,
Bernardo
--- On Wed, 4/28/10, Mefford, Walt <walt.mefford@garmin.com> wrote:
From: Mefford, Walt <walt.mefford@garmin.com>
Subject: RE: Lightning-List: Lightning Panel blank.
=0A=0A=0A=0A =0A =0A=0A=0A=0A=0A=0A=0A=0A=0ATry .DXF format.=C2- This for
mat will transfer to quite a variety=0Aof CAD packages other than AutoCAD.
=0A=0A =C2- =0A=0AWalt Mefford =0A=0AN881WP =0A=0A =C2- =0A=0A=0A=0AFro
m:=0Aowner-lightning-list-server@matronics.com=0A[mailto:owner-lightning-li
st-server@matronics.com] On Behalf Of Bernard=0AMelendez, Jr.
=0ASent: Wednesday, April 28, 2010 8:42 AM
=0ATo: lightning-list@matronics.com
=0ASubject: RE: Lightning-List: Lightning Panel blank. =0A=0A=0A=0A =C2-
=0A=0A=0A =0A =0A Nick,
=0A Don't worry about it, I'll get a copy eventually. As I've always under
stood=0A it, AutoCAD newer versions should always be backwards compatible,
all the way=0A to V.10. Oh, well...
=0A Regards,
=0A Bernardo
=0A
=0A
=0A --- On Wed, 4/28/10, flylightning <info@flylightning.net>=0A wrote:
=0A
=0A From: flylightning <info@flylightning.net>
=0A Subject: RE: Lightning-List: Lightning Panel blank.
=0A To: lightning-list@matronics.com
=0A Date: Wednesday, April 28, 2010, 8:43 AM =0A =0A =0A Bernardo, =0A
=C2- =0A I guess=0A it is a CAD file from CAD2004, my computer opens i
t as a e-viewer because I=0A don=99t have CAD hereSo should
be able with an 04 or newer edition. =0A =C2- =0A Nick =0A =C2- =0A
=0A =0A =0A =0A From:=0A owner-lightning-list-server@matronics.com
=0A [mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylig
htning
=0A Sent: Wednesday, April 28, 2010 7:55 AM
=0A To: lightning-list@matronics.com
=0A Subject: RE: Lightning-List: Lightning Panel blank. =0A =0A =C2-
=0A Looks=0A like and e-viewer file sorry, I will get the Cad drawing.
=0A =C2- =0A Nick =0A =C2- =0A =0A =0A =0A =0A From:=0A owner-
lightning-list-server@matronics.com=0A [mailto:owner-lightning-list-server
@matronics.com] On Behalf Of Bernard=0A Melendez, Jr.
=0A Sent: Tuesday, April 27, 2010 5:03 PM
=0A To: lightning-list@matronics.com
=0A Subject: Re: Lightning-List: Lightning Panel blank. =0A =0A =C2-
=0A =0A =0A =0A Hi=0A Nick,
=0A Is this an AutoCAD file? And if it is, what version is it? I have Au
toCAD=0A 2000 loaded on my computer but cannot open it, says it's incomp
atible. It=0A was nice meeting you guys at Sun-n-Fun.
=0A Regards, =0A =0A Bernardo=C2-Melendez,=0A Realtor
=0A Professional Real Estate Inspector =0A =0A =0A ALIANZA INSP
ECTIONS =0A =0A =0A Mobile:=C2-=C2-=0A 281.536.9052 =0A
=0A =0A Bernardo@AlianzaInspections.com =0A =0A
=0A
=0A --- On Tue, 4/27/10, flylightning <info@flylightning.net>=0A wrot
e: =0A
=0A From: flylightning <info@flylightning.net>
=0A Subject: Lightning-List: Lightning Panel blank.
=0A To: lightning-list@matronics.com
=0A Date: Tuesday, April 27, 2010, 3:00 PM =0A =0A =0A Group,
=0A =C2- =0A Panel=0A blank and fuel console blank. Remember the
panel fits into a molded pod not=0A a flat straight back face. In gener
al items like radios and autopilot must=0A be mounted lower in the panel
. =0A Remember=0A the Canopy tip up brackets as well. The nicest pane
l in the world wont fit=0A if you forget about those tip up supports and
the back of your EFIS or some=0A connector runs into them. =0A =C2
- =0A Nick=0A Otterback =0A Arion=0A Aircraft, LLC =0A =0A
=0A =0A =0A =0A =C2-=C2- =C2-http://www.matronics.com/Navi
gator?Lightning-List =C2-http://forums.matronics.com =C2-http://www.mat
ronics.com/contribution =0A http://www.matronics.com/Navigator?Lightning-l
ank" href="http://forums.matronics.com">http://forums.matronics.com<=
========= =0A =0A =0A=0A=0A =C2- =C2-http://www.matr
onics.com/Navigator?Lightning-Listhttp://forums.matronics.comhttp://www.mat
ronics.com/contribution =C2- =0A=0A=0A=0A--------------------------------
------------------------------------------------=0AThis e-mail and any atta
chments may contain confidential material for the sole use of the intended
recipient. If you are not the intended recipient, please be aware that any
disclosure, copying, distribution or use of this e-mail or any attachment i
s prohibited. If you have received this e-mail in error, please contact the
sender and delete all copies.=0A=C2-=0AThank you for your cooperation.
=0A=0A=0A
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Nick
When anyone does something not so right I feel it "may" be wise to pass
it on.
today I was near Wolk field (Wi) and realised I had forgotten to lock my
right side fuel cap. Having gone 60 miles and blowing out 9 gal of fuel
into space it then got my attention. I am still hear to talk about it,
no fire and I made it back ok. When I realized the issue I drew the
fuel from the right tank and reduced airspead, this did stop fuel loss.
I have a habit of leaving my caps lose when topped in the hanger to stop
expansion of fuel to seals. I leave a "reminder" on the left wing but
forgot the right side,
good news is I walked the runway when I returned and found the cap near
the end of the runway where I would be at about 200 ft and about 80 mph.
??Dave Mcc, Esqual
----- Original Message -----
From: Bernard Melendez, Jr.
To: lightning-list@matronics.com
Sent: Tuesday, April 27, 2010 5:02 PM
Subject: Re: Lightning-List: Lightning Panel blank.
Hi Nick,
Is this an AutoCAD file? And if it is, what version is it? I
have AutoCAD 2000 loaded on my computer but cannot open it, says it's
incompatible. It was nice meeting you guys at Sun-n-Fun.
Regards,
Bernardo Melendez, Realtor
Professional Real Estate Inspector
ALIANZA INSPECTIONS
Mobile: 281.536.9052
Bernardo@AlianzaInspections.com
--- On Tue, 4/27/10, flylightning <info@flylightning.net> wrote:
From: flylightning <info@flylightning.net>
Subject: Lightning-List: Lightning Panel blank.
To: lightning-list@matronics.com
Date: Tuesday, April 27, 2010, 3:00 PM
Group,
Panel blank and fuel console blank. Remember the panel fits
into a molded pod not a flat straight back face. In general items like
radios and autopilot must be mounted lower in the panel.
Remember the Canopy tip up brackets as well. The nicest panel
in the world wont fit if you forget about those tip up supports and the
back of your EFIS or some connector runs into them.
Nick Otterback
Arion Aircraft, LLC
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|