---------------------------------------------------------- Lightning-List Digest Archive --- Total Messages Posted Thu 04/29/10: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:00 AM - Re: Lightning Panel blank. (Johnny Thompson) 2. 08:09 AM - Re: Lightning Panel blank. (flylightning) 3. 09:54 AM - Lightning Panel blank. Acad 2000 version () 4. 12:52 PM - Re: Lightning Panel blank. (Bernard Melendez, Jr.) 5. 02:13 PM - Re: fuel (Dave) ________________________________ Message 1 _____________________________________ Time: 02:00:03 AM PST US From: "Johnny Thompson" <8wn@comcast.net> Subject: Re: Lightning-List: Lightning Panel blank. Earnie Since you can open it could you save it in Auto Cad 2000 and send it to the group. Thanks Johnny Thompson ----- Original Message ----- From: Sent: Wednesday, April 28, 2010 7:24 AM Subject: RE: Lightning-List: Lightning Panel blank. > > It is a 2004 version file. I opened it in AutoCAD and checked the version. > > Earnie Fontenot > efontenot3@cox.net > > ---- flylightning wrote: >> Bernardo, >> >> >> >> I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer >> because I don't have CAD here.So should be able with an 04 or newer >> edition. >> >> >> >> Nick >> >> >> >> _____ >> >> From: owner-lightning-list-server@matronics.com >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of >> flylightning >> Sent: Wednesday, April 28, 2010 7:55 AM >> To: lightning-list@matronics.com >> Subject: RE: Lightning-List: Lightning Panel blank. >> >> >> >> Looks like and e-viewer file sorry, I will get the Cad drawing. >> >> >> >> Nick >> >> >> >> _____ >> >> From: owner-lightning-list-server@matronics.com >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard >> Melendez, Jr. >> Sent: Tuesday, April 27, 2010 5:03 PM >> To: lightning-list@matronics.com >> Subject: Re: Lightning-List: Lightning Panel blank. >> >> >> >> >> Hi Nick, >> Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD >> 2000 loaded on my computer but cannot open it, says it's incompatible. It >> was nice meeting you guys at Sun-n-Fun. >> Regards, >> >> Bernardo Melendez, Realtor >> Professional Real Estate Inspector >> >> ALIANZA INSPECTIONS >> >> Mobile: 281.536.9052 >> >> Bernardo@AlianzaInspections.com >> >> >> >> --- On Tue, 4/27/10, flylightning wrote: >> >> >> From: flylightning >> Subject: Lightning-List: Lightning Panel blank. >> To: lightning-list@matronics.com >> Date: Tuesday, April 27, 2010, 3:00 PM >> >> Group, >> >> >> >> Panel blank and fuel console blank. Remember the panel fits into a molded >> pod not a flat straight back face. In general items like radios and >> autopilot must be mounted lower in the panel. >> >> Remember the Canopy tip up brackets as well. The nicest panel in the >> world >> wont fit if you forget about those tip up supports and the back of your >> EFIS >> or some connector runs into them. >> >> >> >> Nick Otterback >> >> Arion Aircraft, LLC >> >> >> >> http://www.matronics.com/Navigator?Lightning-List >> >> http://forums.matronics.com >> >> http://www.matronics.com/contribution > > > ________________________________ Message 2 _____________________________________ Time: 08:09:51 AM PST US From: "flylightning" Subject: RE: Lightning-List: Lightning Panel blank. Bernardo, Very cool looks like a little fighter..like the paint job too. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Wednesday, April 28, 2010 10:01 AM Subject: RE: Lightning-List: Lightning Panel blank. Thanks, Nick. Regards, Bernardo Melendez P.S. For your viewing pleasure, here's a pic of my current steed. --- On Wed, 4/28/10, flylightning wrote: From: flylightning Subject: RE: Lightning-List: Lightning Panel blank. Looks like and e-viewer file sorry, I will get the Cad drawing. Nick _____ From: owner-lightning-list-server@matronics.com [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard Melendez, Jr. Sent: Tuesday, April 27, 2010 5:03 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC http://www.matronics.com/Navigator?Lightning-List http://forums.matronics.com http://www.matronics.com/contribution ________________________________ Message 3 _____________________________________ Time: 09:54:26 AM PST US From: Subject: Lightning-List: Lightning Panel blank. Acad 2000 version This should be in AutoCAD 2000 format. Earnie Fontenot ---- Johnny Thompson <8wn@comcast.net> wrote: > > Earnie > Since you can open it could you save it in Auto Cad 2000 and send it to the > group. Thanks Johnny Thompson > ----- Original Message ----- > From: > To: > Sent: Wednesday, April 28, 2010 7:24 AM > Subject: RE: Lightning-List: Lightning Panel blank. > > > > > > It is a 2004 version file. I opened it in AutoCAD and checked the version. > > > > Earnie Fontenot > > efontenot3@cox.net > > > > ---- flylightning wrote: > >> Bernardo, > >> > >> > >> > >> I guess it is a CAD file from CAD2004, my computer opens it as a e-viewer > >> because I don't have CAD here.So should be able with an 04 or newer > >> edition. > >> > >> > >> > >> Nick > >> > >> > >> > >> _____ > >> > >> From: owner-lightning-list-server@matronics.com > >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of > >> flylightning > >> Sent: Wednesday, April 28, 2010 7:55 AM > >> To: lightning-list@matronics.com > >> Subject: RE: Lightning-List: Lightning Panel blank. > >> > >> > >> > >> Looks like and e-viewer file sorry, I will get the Cad drawing. > >> > >> > >> > >> Nick > >> > >> > >> > >> _____ > >> > >> From: owner-lightning-list-server@matronics.com > >> [mailto:owner-lightning-list-server@matronics.com] On Behalf Of Bernard > >> Melendez, Jr. > >> Sent: Tuesday, April 27, 2010 5:03 PM > >> To: lightning-list@matronics.com > >> Subject: Re: Lightning-List: Lightning Panel blank. > >> > >> > >> > >> > >> Hi Nick, > >> Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD > >> 2000 loaded on my computer but cannot open it, says it's incompatible. It > >> was nice meeting you guys at Sun-n-Fun. > >> Regards, > >> > >> Bernardo Melendez, Realtor > >> Professional Real Estate Inspector > >> > >> ALIANZA INSPECTIONS > >> > >> Mobile: 281.536.9052 > >> > >> Bernardo@AlianzaInspections.com > >> > >> > >> > >> --- On Tue, 4/27/10, flylightning wrote: > >> > >> > >> From: flylightning > >> Subject: Lightning-List: Lightning Panel blank. > >> To: lightning-list@matronics.com > >> Date: Tuesday, April 27, 2010, 3:00 PM > >> > >> Group, > >> > >> > >> > >> Panel blank and fuel console blank. Remember the panel fits into a molded > >> pod not a flat straight back face. In general items like radios and > >> autopilot must be mounted lower in the panel. > >> > >> Remember the Canopy tip up brackets as well. The nicest panel in the > >> world > >> wont fit if you forget about those tip up supports and the back of your > >> EFIS > >> or some connector runs into them. > >> > >> > >> > >> Nick Otterback > >> > >> Arion Aircraft, LLC > >> > >> > >> > >> http://www.matronics.com/Navigator?Lightning-List > >> > >> http://forums.matronics.com > >> > >> http://www.matronics.com/contribution > > > > > > > > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 12:52:31 PM PST US From: "Bernard Melendez, Jr." Subject: RE: Lightning-List: Lightning Panel blank. Sexy looking bird, Walt. I like the silver on yellow. Congrats on a fine ex ample. Hope mine looks as good when I build and finish it. Thanks for the info on the file. Regards, Bernardo --- On Wed, 4/28/10, Mefford, Walt wrote: From: Mefford, Walt Subject: RE: Lightning-List: Lightning Panel blank. =0A=0A=0A=0A =0A =0A=0A=0A=0A=0A=0A=0A=0A=0ATry .DXF format.=C2- This for mat will transfer to quite a variety=0Aof CAD packages other than AutoCAD. =0A=0A =C2- =0A=0AWalt Mefford =0A=0AN881WP =0A=0A =C2- =0A=0A=0A=0AFro m:=0Aowner-lightning-list-server@matronics.com=0A[mailto:owner-lightning-li st-server@matronics.com] On Behalf Of Bernard=0AMelendez, Jr. =0ASent: Wednesday, April 28, 2010 8:42 AM =0ATo: lightning-list@matronics.com =0ASubject: RE: Lightning-List: Lightning Panel blank. =0A=0A=0A=0A =C2- =0A=0A=0A =0A =0A Nick, =0A Don't worry about it, I'll get a copy eventually. As I've always under stood=0A it, AutoCAD newer versions should always be backwards compatible, all the way=0A to V.10. Oh, well... =0A Regards, =0A Bernardo =0A =0A =0A --- On Wed, 4/28/10, flylightning =0A wrote: =0A =0A From: flylightning =0A Subject: RE: Lightning-List: Lightning Panel blank. =0A To: lightning-list@matronics.com =0A Date: Wednesday, April 28, 2010, 8:43 AM =0A =0A =0A Bernardo, =0A =C2- =0A I guess=0A it is a CAD file from CAD2004, my computer opens i t as a e-viewer because I=0A don=99t have CAD hereSo should be able with an 04 or newer edition. =0A =C2- =0A Nick =0A =C2- =0A =0A =0A =0A =0A From:=0A owner-lightning-list-server@matronics.com =0A [mailto:owner-lightning-list-server@matronics.com] On Behalf Of flylig htning =0A Sent: Wednesday, April 28, 2010 7:55 AM =0A To: lightning-list@matronics.com =0A Subject: RE: Lightning-List: Lightning Panel blank. =0A =0A =C2- =0A Looks=0A like and e-viewer file sorry, I will get the Cad drawing. =0A =C2- =0A Nick =0A =C2- =0A =0A =0A =0A =0A From:=0A owner- lightning-list-server@matronics.com=0A [mailto:owner-lightning-list-server @matronics.com] On Behalf Of Bernard=0A Melendez, Jr. =0A Sent: Tuesday, April 27, 2010 5:03 PM =0A To: lightning-list@matronics.com =0A Subject: Re: Lightning-List: Lightning Panel blank. =0A =0A =C2- =0A =0A =0A =0A Hi=0A Nick, =0A Is this an AutoCAD file? And if it is, what version is it? I have Au toCAD=0A 2000 loaded on my computer but cannot open it, says it's incomp atible. It=0A was nice meeting you guys at Sun-n-Fun. =0A Regards, =0A =0A Bernardo=C2-Melendez,=0A Realtor =0A Professional Real Estate Inspector =0A =0A =0A ALIANZA INSP ECTIONS =0A =0A =0A Mobile:=C2-=C2-=0A 281.536.9052 =0A =0A =0A Bernardo@AlianzaInspections.com =0A =0A =0A =0A --- On Tue, 4/27/10, flylightning =0A wrot e: =0A =0A From: flylightning =0A Subject: Lightning-List: Lightning Panel blank. =0A To: lightning-list@matronics.com =0A Date: Tuesday, April 27, 2010, 3:00 PM =0A =0A =0A Group, =0A =C2- =0A Panel=0A blank and fuel console blank. Remember the panel fits into a molded pod not=0A a flat straight back face. In gener al items like radios and autopilot must=0A be mounted lower in the panel . =0A Remember=0A the Canopy tip up brackets as well. The nicest pane l in the world wont fit=0A if you forget about those tip up supports and the back of your EFIS or some=0A connector runs into them. =0A =C2 - =0A Nick=0A Otterback =0A Arion=0A Aircraft, LLC =0A =0A =0A =0A =0A =0A =C2-=C2- =C2-http://www.matronics.com/Navi gator?Lightning-List =C2-http://forums.matronics.com =C2-http://www.mat ronics.com/contribution =0A http://www.matronics.com/Navigator?Lightning-l ank" href="http://forums.matronics.com">http://forums.matronics.com<= ========= =0A =0A =0A=0A=0A =C2- =C2-http://www.matr onics.com/Navigator?Lightning-Listhttp://forums.matronics.comhttp://www.mat ronics.com/contribution =C2- =0A=0A=0A=0A-------------------------------- ------------------------------------------------=0AThis e-mail and any atta chments may contain confidential material for the sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment i s prohibited. If you have received this e-mail in error, please contact the sender and delete all copies.=0A=C2-=0AThank you for your cooperation. =0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 02:13:07 PM PST US From: "Dave" Subject: Re: Lightning-List: fuel Nick When anyone does something not so right I feel it "may" be wise to pass it on. today I was near Wolk field (Wi) and realised I had forgotten to lock my right side fuel cap. Having gone 60 miles and blowing out 9 gal of fuel into space it then got my attention. I am still hear to talk about it, no fire and I made it back ok. When I realized the issue I drew the fuel from the right tank and reduced airspead, this did stop fuel loss. I have a habit of leaving my caps lose when topped in the hanger to stop expansion of fuel to seals. I leave a "reminder" on the left wing but forgot the right side, good news is I walked the runway when I returned and found the cap near the end of the runway where I would be at about 200 ft and about 80 mph. ??Dave Mcc, Esqual ----- Original Message ----- From: Bernard Melendez, Jr. To: lightning-list@matronics.com Sent: Tuesday, April 27, 2010 5:02 PM Subject: Re: Lightning-List: Lightning Panel blank. Hi Nick, Is this an AutoCAD file? And if it is, what version is it? I have AutoCAD 2000 loaded on my computer but cannot open it, says it's incompatible. It was nice meeting you guys at Sun-n-Fun. Regards, Bernardo Melendez, Realtor Professional Real Estate Inspector ALIANZA INSPECTIONS Mobile: 281.536.9052 Bernardo@AlianzaInspections.com --- On Tue, 4/27/10, flylightning wrote: From: flylightning Subject: Lightning-List: Lightning Panel blank. To: lightning-list@matronics.com Date: Tuesday, April 27, 2010, 3:00 PM Group, Panel blank and fuel console blank. Remember the panel fits into a molded pod not a flat straight back face. In general items like radios and autopilot must be mounted lower in the panel. Remember the Canopy tip up brackets as well. The nicest panel in the world wont fit if you forget about those tip up supports and the back of your EFIS or some connector runs into them. Nick Otterback Arion Aircraft, LLC ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lightning-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lightning-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lightning-list Browse Digests http://www.matronics.com/digest/lightning-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.