Today's Message Index:
----------------------
1. 03:43 AM - Canopy Protective Coating ()
2. 09:36 AM - Re: Canopy Protective Coating (Paul Bryant)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Canopy Protective Coating |
Hello Group,
Has anyone had success with removing the protective coating on the
canopy bubble other than with your thumb nail. Its easy where the
coating is thick but on the inside it is really thin and almost
impossible to get off.
Cheers
Steve Behn
Lightning 69
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Canopy Protective Coating |
Steve, I scrapped mine at the factory. they had a scraper which I believe was made
out of Plexiglas and worked perfectly. Check with Nick.
He might be able to give you more info, since this was several years ago.
Bear
-----Original Message-----
From: stephenbehn <stephenbehn@bigpond.com>
Sent: Wed, Sep 27, 2017 7:35 am
Subject: Lightning-List: Canopy Protective Coating
Hello Group,
Has anyone had success with removing the protective coating on the canopy bubble
other than with your thumb nail. Its easy where the coating is thick but
on the inside it is really thin and almost impossible to get off.
Cheers
Steve Behn
Lightning 69
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|